FERRITE - 389 Anuncios

Sábado 03 septiembre 2016

Precio : 10,00 €

Soundsing Audio Manufacturing Co.,Ltd is one of the leading China 6.5" neo midrange speaker manufacturers and suppliers, providing with 6.5" mid neodymium speaker wholesale, welcome to import high quality products from our factory. SD-6N35 a 6.5" mid neodymium speaker. It has excellent...

Sábado 03 septiembre 2016

Precio : 10,00 €

Soundsing Audio Manufacturing Co.,Ltd is one of the leading China 10" speaker driver manufacturers and suppliers, providing with 12" pro audio driver wholesale, welcome to import high quality products from our factory. SD10/750YKA is a high power 10” speaker driver. Thick front plate...

Sábado 03 septiembre 2016

Precio : 10,00 €

Soundsing Audio Manufacturing Co.,Ltd is one of the leading China 18"speaker driver manufacturers and suppliers,Website: http://www.soundsingpro.com, providing with 18" line array speaker wholesale, welcome to import high quality products from our factory. SN-1801W , is a 18” neodymium...

Martes 23 agosto 2016

Cantidad : 1000

madera de nogal portacuchillas Magnética ESTÉRIL tira de madera Cuchillo --- cuchillos magnético mantiene dejarlos secar rápidamente y protección contra la oxidación, se mantienen alejados de las bacterias y de fácil limpieza. ASEGURAMIENTO DE LA CALIDAD --- permanentes de...

Martes 22 marzo 2016

Precio : 1-1000

WEBSITE: www.haolxfiltration.com TEL: 86-318-7061221 E-MAIL: candy@filter-cn.com Category: knitted wire mesh products Material: knitted wire mesh,stainless steel 304/316/316L Properties: EMI Shielding Products Application: Automotive,EMC,EMI,Engineering,Houseware Wire mesh EMI...

Viernes 04 marzo 2016

Wurth elecktronik made in germany, composant aimanté pour composant électrique. Lot important !! Ubicación : 13 rue carnot , 80500 Montdidier, Persona a contactar : Maxime Maitre, 06 17 25 61 14

Sábado 28 noviembre 2015

Cantidad : 5000 Piece - Precio : US $1 - 5 / Kilogram

Generally speaking, the higher the hardness of the hammer wear more. To improve the wear resistance of the hammer, it is necessary to increase the hardness, but with the increase in hardness, hammer impact toughness will be reduced. Therefore, how to balance the hammer suitable hardness...

Sábado 28 noviembre 2015

Cantidad : 100 Set/Se - Precio : US $2,000 - 200,000

Generally speaking, the higher the hardness of the hammer wear more. To improve the wear resistance of the hammer, it is necessary to increase the hardness, but with the increase in hardness, hammer impact toughness will be reduced. Therefore, how to balance the hammer suitable hardness...

Martes 17 noviembre 2015

EMI Suppression Components/EMI filter/EMI ferrite core/EMI ferrite bead/EMI ferrite core with mount holder Features&Applications of EMI Suppression Components 1.Effectively absorb high-frequency clutter, very high resistivity and magnetic conductitity 2.Equivalent to inductor...

Sábado 14 noviembre 2015

Cantidad : 5000 Piece - Precio : US $1 - 5 / Kilogram

Generally speaking, the higher the hardness of the hammer wear more. To improve the wear resistance of the hammer, it is necessary to increase the hardness, but with the increase in hardness, hammer impact toughness will be reduced. Therefore, how to balance the hammer suitable hardness...

Sábado 14 noviembre 2015

Cantidad : 100 Set/S - Precio : US $2,000 - 200,000

Generally speaking, the higher the hardness of the hammer wear more. To improve the wear resistance of the hammer, it is necessary to increase the hardness, but with the increase in hardness, hammer impact toughness will be reduced. Therefore, how to balance the hammer suitable hardness...

Sábado 31 octubre 2015

Cantidad : 1+ - Precio : mail

Generally speaking, the higher the hardness of the hammer wear more. To improve the wear resistance of the hammer, it is necessary to increase the hardness, but with the increase in hardness, hammer impact toughness will be reduced. Therefore, how to balance the hammer suitable hardness...

Sábado 31 octubre 2015

Cantidad : 1+ - Precio : mail

Generally speaking, the higher the hardness of the hammer wear more. To improve the wear resistance of the hammer, it is necessary to increase the hardness, but with the increase in hardness, hammer impact toughness will be reduced. Therefore, how to balance the hammer suitable hardness...

Jueves 03 septiembre 2015

Cantidad : 1+ - Precio : mail

Generally speaking, the higher the hardness of the hammer wear more. To improve the wear resistance of the hammer, it is necessary to increase the hardness, but with the increase in hardness, hammer impact toughness will be reduced. Therefore, how to balance the hammer suitable hardness...

Viernes 06 febrero 2015

Cantidad : 999 - Precio : 99 999,00 €

Magnetic separator, the use of high-quality ferrite material and rare earth permanent magnet compound and into, the drum surface of the average magnetic induction strength is 100 ~ 600mT. According to user needs, more can provide downstream, half counter current, counter current...

Sábado 08 noviembre 2014

Ferrite magnet is a kind of permanent magnet that made from iron oxide and barium or strontium carbonate by ceramic processing technology. So it's also called as ceramic magnet. Special maching process needed for Ferrite magnet because it is brittle. Ferrite magnet can be made to...

Sábado 08 noviembre 2014

NdFeB (Neodymium-Iron-Boron) is the most powerful rare-earth permanent magnet, because of this, it called super magnet or strong magnet . NdFeB magnet was developed from the year of 1983 and became commercially available in 1984. Neodymium magnet have the highest Br, and BHmax of...

Jueves 06 noviembre 2014

Flexible Rubber Magnets is made by mixing ferrite powder with synthetic rubber or plastic.. Material is manufactured in Anisotropic and Isotropic , Isotropic flexible magnets are good for display, promotional, Advertising, educational purpose. And Anisotropic Flexible magnets...

Jueves 06 noviembre 2014

These handy magnetic Filter make clean up a snap! Pick up debris, small ferrous parts, metal shavings, chips, or just anything magnetic - a real time saver for workshop and machines cleaning. They have stainless steel tubes with strong Neodymium magnets inside and handle is black plastic...

Miércoles 22 octubre 2014

C50 steel is high-quality carbon structural steel under the standard EN 10083-2. 1. EN10083-2 C50 steel characteristics: C50 is high strength medium carbon steel and it's cold deformation plasticity is low. Welding performance and hardenability is poor for C50 steel. But its no...

Sábado 31 mayo 2014

Cantidad : high

Product Description The magnetic system of magnetic separator is made of compound materials composed of high grade ferrite materials and rare earth alnico. The average magnetic induction of the drum surface is 100mt to 600mt. Different types of magnetic separation such as forward flow...

Sábado 26 octubre 2013

Cantidad : 1 - Precio : 10,00 €

Description of magnetic separator: The magnetic system of magnetic separator is made of compound materials composed of high grade ferrite materials and rare earth alnico. The average magnetic induction of the drum surface is 100mt to 600mt. Different types of magnetic separation...

Viernes 23 agosto 2013

Cantidad : MOQ 100 PC - Precio : 0.01-100USD

AIM mainly produces NdFeB magnet, Ferrite magnet and Rubber magnet with any grades, sizes and shapes . We have a strict and complete quality control system, and all of our products have passed the cert ification of REACH,ROHS,SGS and ISO9001: 2008. Most importantly, we can offer...

Miércoles 22 diciembre 2010

Cantidad : 10000 - Precio : 8,45 €

Diameter: 154*45mm Cone Material: Paper Edge: Foam/Cloth Nominal Power: 5W Maximum Power: 10W Impedance: 4/8/16/32+15% Voice coil: Fo: 220+20%Hz Response: Fo-10kHz S.P.L: 88+3dB/1W/0.5M Magnet Size: 40*19*8(Ferrite) 32*18*6(Ferrite) Net weight: 111gUbicación : 2228-2227,Fudu Shangwu Building,No...

Lunes 03 mayo 2010

Amlodipine Benzenesulfonate According to Standard: WS-775(X-620)-2001 Appearance: White or white like powder Solubility: Complies Identification: Complies Loss on Drying: ≤ 0.5% Residue on Ignition: ≤ 0.2% Ferrite: ≤ 0.02% Heavy Metal: ≤ 0.002% Related Substances...

Viernes 04 septiembre 2009

we believe that our quality and price will have more advantages. w e are the professional manufacturer of magnets, producing and distributing various kinds of magnets,including NdFeB magnets, Ferrite magnet,Flexible magnets,SmCo magnets, Alnico magnet,etc. our products are holding...

Lunes 27 octubre 2008

Cantidad : 1000000

As a professional researcher and manufacturer of permanent ferrite magnet, our factory has experience over 30 years, to produce various magnet applied to automobile industry, power tool, lawn mower/electric saw, general motor, textile machine, medical care/fitness equipment and other DC motor...

Viernes 08 diciembre 2006

Cantidad : 500

We are specizlized in manufacuring, seeling and serving magnet, including Ferrite Magnet, NdFeB Magnet, Alnico Magnet and Rubber Magnet ect. Our products are widely applied in various speakers,motors,receivers,toys,medical instruments,magnetizing devices ect.Ubicación : Room 601, Lane 154, No...

Sábado 11 noviembre 2006

Our company is one of the leading manufacturer r in door and window industry.. We mainly supply metallic doors as well as high-quality hardware components for door and window and furniture industries, such as hinges , Latches, magnetic door catches, pulls, knobs, slides, wheels, castors...