GANG NAIL PLATES - 9348 Anuncios

Martes 29 marzo 2016

Cantidad : 100sets/ye - Precio : Negotiatable

Application The sawdust dryer is widely used for drying the chalk slags, coal powder, slags, clay and other materials in the building materials, metallurgy, chemical industry, cement industry. The wood chip rotary dryer has a better adaptability and can dry various materials with...

Martes 29 marzo 2016

Cantidad : 100sets/ye - Precio : Negotiatable

Product Introduction Hollow coal rods machine, can also be called coal rod machine. It uses the principle of screw extrusion, modulated the cheap coal compressed into a certain strength of the cylindrical or plum shape coal rods, used to replace the expensive coal. It can make full...

Martes 29 marzo 2016

Cantidad : 100sets/ye - Precio : Negotiatable

Product Introduction Coal rod extrusion machine is the main equipment of the fuel system in the shaping process, it will fuel coal powder extruded into a certain strength of the coal rod (shape according to the requirements, there are many) used to replace coal into the new combustion...

Martes 29 marzo 2016

Cantidad : 100sets/ye - Precio : Negotiatable

Introduction Slime drying machine adopts unique scattering device, the bond of slime scattered after drying, increased the contact area of the coal slime with hot air and the heat utilization efficiency can be greatly improved, after drying the slurry can be disposable water cut to below 12%...

Martes 29 marzo 2016

Cantidad : 100sets/ye - Precio : Negotiatable

Product Instruction The chain conveyor dryer is a continuous drying machinery designed for drying large bulks of sheet-shaped, bar-shaped and granular materials with higher air permeability, such as coal briquette, coal slime briquette, mineral powder briquette, etc. Today, this...

Martes 29 marzo 2016

Summary The machine is generally used for low-pressure die casting of colored metal and aluminium alloy. It is application widely including the production of middle and small aluminium alloy castings autos, motorbikes, instruments, textile machines and aeronautic industry. The...

Viernes 25 marzo 2016

- Warranty for Two Years!!! - - - - - - Original Factory Electronic Densimeter for Solids - - - Application: Rubber,plastic,tire,shoe materials,wire and cable,electrical apparatus,packing materials,sports goods,sports equipment,glass,hard alloy,metal,powder metallurgy,magnetic...

Jueves 24 marzo 2016

- Warranty for Two Years!!! - - 2015NEW!!! - - China Original Factory Digital Electronic Gold Purity Tester Price , Precious Metal Tester , Gold Karat Purity Analyzer AU-300K - Application: pawnbroking,jewelry industry,banking industry,jewelry testing center,mining industry...

Miércoles 23 marzo 2016

Names: Water,Glycerin,ButyleneGlycol, Carbomer,Polysorbate20, palmitoyltripeptide-1,PalmitoylTetrapept ide-7, Phenoxyethanol,Ethylhexylglycerin CAS NO.: 7732-18-5,56-81-5,107-88-0,9003-01-4, 9005-64-5,122-99-6,70445-33-9 Activity Peptide: 100ppm Palmitoyltripeptide-1(Pal-GHK)...

Miércoles 23 marzo 2016

Material Mild steel, in China we usually use Q235, which similar to grade 250(AUS), A283(USA). we can also us e Q345 which similar to grade 350 (AUS), A210(USA).This gives you amazing value through greatly incr eased product life. Size It can range in size from 1.5cbm to 14cbm...

Martes 22 marzo 2016

Name: Aqua,Glycerin,Palmitoyl Oligopeptide, PEG-8 , GlycerylPolymethacrylate CAS NO: 7732-18-5 , 56-81-5,171263-26-6, 5117-19-1, 146126-21-8 Activity Peptide: 120 ppm Palmitoyl Oligopeptide Functions: ·Palmitoyl oligopeptide can promote the collagen,elastin and hyaluronic acid...

Martes 22 marzo 2016

Cantidad : 1 - Precio : 600-5000 dollars

Please send me an inquiry to get more details and my quotation. Tel: 0755-61603553 Fax: 0755-28305732 Whatsapp: 18476556262 Skype: baotrol8 Email: baotrol8@szbaotrol.com Website: www.szbaotrol.com For more informations about my company, welcome to visit our website: http://www...

Domingo 20 marzo 2016

Cantidad : Minimum:20 - Precio : US $6.15 - 7.98 / Ki

Condensation Silicone Rubber Product Title Welcome come to inspecting our factory, we will pick you up when you are in Guangzhou City. 4% catalyst is offered for FREE of charge Silicone range: 10-60 shore A Features Of Hot Sell High Quality Liquid Silicone Rubber for Soap Mold Making 1 ...

Domingo 20 marzo 2016

Cantidad : Minimum:20 - Precio : 9.65 USD/kg

Product Title Of Newest Pad Printing Silicone Rubber for Plastic Toys Welcome come to inspecting our factory, we will pick you up when you are in Guangzhou City. Specifications Of High Quality Pad Printing Silicone Rubber For Plastic Toys 4% catalyst is offered for FREE of charge(for the 100...)

Viernes 18 marzo 2016

Cantidad : 6000tons - Precio : USD $ 2640.00/ton

Brand Name: eonyz Min. Order: 9000 Kilograms FOB Price: US$ 2640.00 FOB Port: Shanghai Lead Time: 1 - 5 days Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T) Country of Origin: China (mainland) Nitrocellulose for coating is widely used to manufacture nitro-lacquers...

Viernes 18 marzo 2016

Cantidad : 60t/Month - Precio : USD8.52 / kilogram

Applications of addition cure silicone rubber for tire mold making, type mold for car tire mold : Addition cure silicone rubber for tire mold making,type mold for car tire mold is primarily intended for tires making , and can be used for poly resin crafts, PU crafts, PU resin crafts ...

Miércoles 16 marzo 2016

Cantidad : 1000000 - Precio : USD75

High speed Corrugator Belt With Kevlar Edge is a consistent development bason on the high speed corr ugator belt.It is ideal for corrugating systems with high production speed,even load systems and fre quently changing paperboard widths.the belt's edge reinforcement of kevlar fibers...

Martes 15 marzo 2016

Cantidad : 200kg - Precio : 5.15usd/kg

Mold making silicone rubber is generally named as two-part silicone rubber that vulcanizes at temperature. Part A is a flow-able liquid, part B is the catalyst. Applications of RTV-2 mold making silicone rubber for stone products: Mold making silicone rubber for stone products is...

Martes 15 marzo 2016

12v mppt solar charge controller Key Features: ■Adopt advanced MCU microprocessor control technology. ■12V/24V/48V self detect to choose output voltage. ■Advanced MPPT T echnology, High converting efficiency higher than 97% for minimizing energy loss. ■Capable to parallel in output...

Sábado 12 marzo 2016

Cantidad : 100000 - Precio : 0,10 €

Quad Copter Key board FPC, 2-layers Flexible Board, Yellow mask+white painting, ENIG+ Steel plate+back Adhesive, 0.5oz copper Board material PI Surface treatment ENIG+steel plate+back adhesive Layer(s) 2 Application Quad Copter Highlight complicated treatment Ubicación ...

Viernes 11 marzo 2016

Precio : 0.01-1USD

Machining Processes: Milling, Turning, Drilling, Boring, Tapping, Turning: Contour Turning, Form Turning, Taper Turning Straight Turning Threading, External Turning Threading Internal Turning Threading, Thread milling Knurling, Spline (Wire EDM), Parting/Cutting Facing, Internal Forming...

Viernes 11 marzo 2016

Precio : 0.01-1USD

General Capabilities: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking over existing...

Miércoles 09 marzo 2016

Full automatic double working hydraulic screen changer 1. single-plate double net screen changer : Equipped with two working screens, it realized very quick screen changing, enhancing producing efficiency and maintenance 2. Screen changing time is within 2 seconds. It enjoys very...

Martes 08 marzo 2016

Cantidad : 100 pcs - Precio : 4-6 usd per piece

Barra de aluminio consola Muebles Pierna características: 1. Color: pulido bello acabado, sin líneas visibles, una sensación de suavidad y buena 2. Perfecto perforación del agujero 3. conexión perfecta entre la barra y la placa 4. diseño simple de 90 grados placa de nivel forma...

Sábado 05 marzo 2016

Cantidad : 10-100 - Precio : 0.01-1

Keywords of CNC Machining Parts: Machining Parts, CNC machining, CNC machining parts, Precision CNC machining parts, precision machin ing parts, CNC Machining components, Machining components Machining Processes of CNC Machining Parts: Milling, Turning, Drilling, Boring, Tapping, Turning...

Sábado 05 marzo 2016

Cantidad : 1000 - Precio : 0.01-1

Product Feature of stamping parts: Press Rating: 30 to 300 tons Max Press Speed: 600 SPM Max. Press Stroke: .5 to 9.75 in Max. Press Bed Length: 95 in Max. Press Bed Width: 33 in Part Thickness: .003 to .188 in Tolerance(+/-): Less than .0005 in Material Used of stamping parts...

Sábado 05 marzo 2016

Cantidad : 10-100 - Precio : 0.01-1

Keywords of Turning Parts : Turning parts, precision turning parts, CNC turning parts, CNC turned parts, precision CNC turned pa rts, precision turned parts, turned parts Product Description of Turning Parts: Machining Processes of Turning Parts: Milling, Turning, Drilling, Boring...

Jueves 03 marzo 2016

Cantidad : 24 - Precio : 13,50 €

Superbe modèle de chemise manches courtes, de fabrication Européenne, il se compose d'une poche plate sur la poitrine côté cœur .Tout coton pour un grand confort, découvrez cette chemisette imprimé en marine et en ciel. Pack de 24 pièces soit 12 a la couleurs. Taille assortie du M au XXL...

Jueves 03 marzo 2016

Cantidad : Min.1 unit - Precio : USD 9000-12500

Specification Rated Load 60000 kg or other Tare Weight 8000 kg or other Wheel Base 5350+1310+1310 5000+1310+1310 (mm) or other Tyre Specifications 1100R20-18/12R22.5-18 No. Of the Tyres 12 Axle Brand FUWA (BPW optional) No. Of the Axles 3 King Pin ...

Miércoles 02 marzo 2016

Cheap Practical Steel Structure Warehouse: 1. General Description: Light steel structure building is a new type of building structure system, which is formed by the main steel framework linking up H-section, Z-section, and U-section steel components, roof and walls using a variety...