Handheld Metal Detector

Features

1.Highly sensitivity.

2.Simple and convenient to use, no adjustment is required.

3.The detection distance will not be changed when the battery voltage drops from 9V to about 7V.

4.Low power consumption, can work for 40 hours continuously.

5.There is automatic and continues alarm when the battery is used up.

6.Switch on/off audio prompt function.

7.With external rechargeable socket hole.

8.Has audio, Light and vibration hand off switch.

Application

1.Electronic detection inspection at airports, railway stations and wharfs.

2.Security inspection of customs, public securities.

3.Quality inspection of medicine and food commercial systems.

4.Security inspection of important sites and playgrounds.

5.Noble metal detection, such as gold or silver jewelry manufacturing plants.

Detection distance

1.Pin 30-60mm

2.64 model handgun 150mm

3.6 inch long knife 160mm

4.Diameter 20mm

5.Steel Ball 90mm

Method to use

1. Turn on the power switch, if a click sound is heard, it indicates that the power has been

connected, and the green LED will turn on at the same time. If the click sound is heard,

it indicates that no battery has been installed or the battery is not well connected.

2. When the switch-on click sound stops, the highly sensitivity detection can be performed.

Grasp the handle and detect with the detection face around the object being detected.

There will an alarmwhen a metal object is detected. In the mean time, the green LED will tur n into red.

Sensitivity adjustment

l.The sensitivity shall be adjusted when performance instability is observed or sound is

produced when detecting human body without any metal stuff because the detection distance </ span>

is loss than the stipulated requirement or the sensitivity is too high.

2.Insert a small straightshaped screwdriver into the small hold of the handle of the detector and

rotate clockwise barely to the position where no sound is produced, then rotate for another h alf a circle,

until the sensitivity meets the requirement.

Note

1.don't forget to turn off the power after use.

2.remove the battery if you don't use it in a long time.

3. Probe will rise when it swept the metal objects .

4. when charging, please turn off the power switch (5).

5. the charger voltage: DC10V. (Charger from the distribution)