Dry Microbial Resistance Tester

Dry tester is designed to determine the properties of the material on the dry matter in the size of the human body dander.

Standards compliant:
ISO 22612; YY / T 0506.5-2009

Test principle:
Test, the samples were fixed on a container. Of these containers, five containers containing Bacillus subtilis powder and one container were added as uncontrolled talc as a control. A petri dish was inserted at the bottom of each container at a distance from the bottom of the container. The equipment supporting the vessel is oscillated by a gas balloon, and the talc penetrating the sample is all dropped onto the culture dish to remove the culture of the culture dish. The experimental results were evaluated by counting the growing colonies.

The main parameters:
Vibration form: pneumatic ball vibrator
Vibration frequency: 20800 times / min
Vibration force: 650N
Worktable size: 40cm × 40cm × 10mm
Workbench media: marble plate
Experimental container: stainless steel test container
Job: 6
Cabinet negative pressure range: -50 Pa ~ -200 Pa
High efficiency filter filtration efficiency: better than 99.99%
Negative pressure cabinet ventilation flow: ≥ 5m3 / min
Data storage capacity: 100,000 group
Working voltage: 220V 50HZ

Features:
Reliable design, stable test;
Front switch glass doors, easy to observe the operation of the experimental staff;
Removable bracket, height adjustable bracket;
Support, mobile dual casters;
Negative pressure experimental system, with the fan exhaust system and the introduction of high efficiency filter to ensure the safety of operators;
Embedded high - speed industrial microcomputer control;
Dedicated operating software, with software parameters calibration, fault detection automatically