Carpet Tile Thickness Gauge

000mm² can be testedon this unit. Additional sizes are available on request.
The tile is mounted on a rigid steel sample plate with raised edge guides, readings are taken at each corner.
An optional data recorder(TTG: DTA) is available, which calculates mean values of readings.

Testing method:

1. Plate the sample on the fixed lower plate with the usage side upwards and lie flatly. Slowly down the upper plate with a horseshoe located on its center position until contact with the sample.
2. The pile thickness can be read directly from the digital gauge after applying a standard pressure for 5s.
3. Test 5 specimens in each sample unless otherwise specified.
4. Record the measured value of each specimen with an accuracy of 0.01mm.

Standard Accessories:

Technical Paremeters:

1. Thickness gauge: digital;
2. Weight of horseshoe: 500g;
3. Lower plate: ≥15cm²;
4. Upper plate: specifications of 8mm, 11.3mm, 25.3mm, 50.0mm, a set of 4;
5. Standard weight: specifications of 0.2kg, 0.4 kg, 0.8 kg, 5 kg, a set of 4;
6. Outside dimensions: 300×400×550mm(L×W×H);
7. Weight: 20kg.