Materias primeras
HY-Q620 Addition Cure Mold Making Silicone Rubber |
Model |
Color |
Mixing ratio (%) |
Pot life (mins, under 25℃) |
Curing time
|
Hardness ( Shore A ) |
Tensile- strength (MPa) |
Tear- strength (kN/m) |
Viscosity (After A/B mixed ,mPa.s) |
Shrinkage rate (%) |
Elongation (%) |
HY-Q620 |
Transparent |
1: 1 or 10: 1 |
30-40 |
4-5(hrs under 25℃) 20-30 (mins under 60℃) |
20±2 |
4.0±0.5
|
20±5
|
10000±1000
|
≤0.1% |
400% |
Characteristics
*An exceptional fluidity and good operability, easy to demold
*Good tensile and tear strength
*Outstanding bubble releasing
*Non-deformation
*Low shirinkage
*Aging resistance ,high temperature resistance (200℃)
*Environmentally, food-grade
Buen trato: comprar del vendedor
Esta página es acerca de los importadores y exportadores de HY-Q620 Addition Cure Mold Making Silicone Rubber Buscar en la categoria : Materias primeras Buscar en la categoria : cure, q620, making, rubber, silicone, addition, mold |
Jueves 16 julio 2015
BLANCO REFINADO DE CAÑA DE AZÚCAR ICUMSA 45 ESPECIFICACIONES : APTOS PARA EL CONSUMO HUMANO POLARIZACIÓN : 99,80 % MÍNIMO HUMEDAD : 00,04 % MÁXIMO SULPHATEASH CONTENIDO: 00,04 % MÁXIMO GRANULACIÓN : medio a fino SOLUBILIDAD : 100 % DRY y de flujo libre RADIACIÓN : NORMAL W / O PRESENCIA...
Jueves 30 mayo 2013
Cantidad : 1000000 to - Precio : 10€
Matériau "Énola" - une expérience unique et inégalée dans le monde; Matériau de construction constitué de polystyrène expansé, de ciment et des additifs spéciaux, qui sont le savoir-faire de notre entreprise. Les représentants de plusieurs pays étrangers s'intéressent de plus en...
Viernes 16 mayo 2014
Cantidad : 5000sets - Precio : $1000-5000/set
Descripción: 1.Base del molde: hasco, dme, rabudin lkm, din, jis. molde 2.Núcleo: 718, s136, p20, nak, lkm, ek 4, x13t6w etc. canal Caliente 3.Molde- maestría punta, maestro, husky, hasco, dme, thermoplay yudo, incoe,etc. 4. Piezas estándar: dme, hasco, más cercano estándar ansi...