Wire Stripping & Cutting Machine
0583
Dar su opinión
Todos los comentarios en este productos
Añadir al carrito
Imprimir
  • 2.6/5
  • 1
  • 2
  • 3
  • 4
  • 5
Detalle
China Bienes de equipo

Reportar abuso

Bienes de equipo

Wire Stripping & Cutting Machine

Fully computer-controlled wire stripping & cutting machine operation procedure

This procedure is about the fully computer-controlled wire stripping & cutting machine operation program and methods, which can make sure the operators to use this machine properly and make sure the machine to run normally for a long time and the quality of the products (made by this machine) meets the specified needs.

1. Preparation:

Turn on the power by pressing the power switch, check whether there is leakage about the machine, whether the transmission part is flexible, whether the cutting tool is firm and reliable, whether the blade is broken or worn seriously and so on.

2. Determine the straightening mode according to the thickness and hardness of the wire.

3. Choose one of the sheath tubes (Ф2, Ф3, Ф4, Ф5) according to the thickness of the wire. The tube diameter should be 0.5 -1.0 mm larger than the wire diameter.

4. Select the suitable left wire sleeve and guide sleeve.

5. Adjust the rollers distance according to the wire outer diameter so that it is slightly less than the wire diameter, so as to control the maximum compaction level of the roller to the wire and protect the wire.

6. After checking using conditions of the blade, pass the wire through the straightener → guide sleeve → sheath tube → blade.

7. Press down each parameter setting button, start the numerical input according to the technical requirement, press the start button to start wire stripping & cutting.

8. During the cutting process, please measure the wire length at any time and check whether the wire is deformed by the roller. If so, it is necessary to loosen the roller, adjust the wire size.

9. When the machine cutting wire, the roller is in a rotating state.

Do not put your hands or fingers into or touch the rotating roller.

10. The operator should turn off the power when adjusting the tool holder or blade. Do not put your hand or finger on the blade.

11. When finish cutting wire, please cut off the power supply and clean up the oil and garbage in all parts of the machine.

  1. Regularly lubricate the transmission parts of the machine.
Ubicación : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu,
Persona a contactar : Lee Salome, 0086 0512 57169166

easysight

  • 3.5/5
Detalle
Inscrito el 17 abril 2018

Sitio web : www.bojin.hk/

Enviar un correo electrónico a easysight

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
Wire Stripping & Cutting Machine

Buscar en la categoria : Bienes de equipo
Buscar en la categoria :
wire, machine, stripping, cutting
  • 3.1/5
  • 1
  • 2
  • 3
  • 4
  • 5
Thailandia 50100 Mayoristas / proveedores

Reportar abuso

Chamex COPIA PAPEL A4 80GSM / 75gsm / 70gsm
Chamex COPIA PAPEL A4 80GSM / 75gsm / 70gsm

Tuesday 03 March 2026

Cantidad : 80000 Ream - Precio : $0.79/Ream for 8000

ESPECIFICACIONES - Tamaño de hoja: 210mm x 297mm / 297mm x 420mm Normas Internacionales de papel Tamaño (ISO) A4 / A3 - Calidad: Importado 100% pulpa de madera virgen - Blancura: 102-104%, blanco natural - Clasificación: A - Espesor: 106cm - Capacidad: High Speed ​​Copiado 100 ppm...

NATH LAOH LTD

  • 50100 - Chiang Mai
  • +66 9 95 35 59 56
  • 3.3/5
  • 1
  • 2
  • 3
  • 4
  • 5
Thailandia 50100 Varios / Descuento

Reportar abuso

IK PLUS MULTIUSOS COPIA PAPEL A4 80GSM / 75gsm / 70gsm
IK PLUS MULTIUSOS COPIA PAPEL A4 80GSM / 75gsm / 70gsm

Tuesday 03 March 2026

Cantidad : 80000 Ream - Precio : $0.79/Ream for 8000

ESPECIFICACIONES - Tamaño de hoja: 210mm x 297mm / 297mm x 420mm Normas Internacionales de papel Tamaño (ISO) A4 / A3 - Calidad: Importado 100% pulpa de madera virgen - Blancura: 102-104%, blanco natural - Clasificación: A - Espesor: 106cm - Capacidad: High Speed ​​Copiado 100 ppm...

NATH LAOH LTD

  • 50100 - Chiang Mai
  • +66 9 95 35 59 56
  • 2.4/5
  • 1
  • 2
  • 3
  • 4
  • 5
Túnez 3094 Batería de cocina

Reportar abuso

OFERTA DE ASOCIACIÓN INDUSTRIAL
OFERTA DE ASOCIACIÓN INDUSTRIAL

Tuesday 03 March 2026

Ets.Dridi Mohamed Aymen "Dray" es una empresa líder y bien desarrollada en el zapatería, su suministro, artículos de cuero y fabricación de ropa. Ofrece a disposición de estos clientes un equipo de profesionales motivados y flexible para la realización de sus necesidades. Con...

DrAy

  • MR.DRIDI
  • 3094 - SFAX
  • +21 6 52 77 77 36
  • +21 6 22 82 47 76