Semi End Dump Trailer

Semi End dump Trailer of Ultraton is the most widely used in heavy-duty Semi Dump Trailer. The cylinder is usually a front-mounted direct push type. The hydraulic cylinder directly lifts the cargo box and dumps it. The stability of the whole vehicle is good and the pressure of the hydraulic system is relatively small. Therefore, the tonnage can be lifted up, the reliability is high, and the service life is long. If you need to transport sand, stone, coal, soil, garbage, bulk goods that are bulky in short distance, semi trailer end dump truck could be an ideal choice. In practical applications, in order to meet the needs of users, there are 9-meter container flat-panel Semi End Dump Trailer, 8-meter flat-panel Semi End Dump Trailer, 7.7-meter flat-panel Semi End Dump Trailer, Skeleton Semi End Dump Trailer, etc. coming up on the market.

In order to prevent the lifting process from overturning, the design reduces the center of gravity to 1.3-1.4 meters, which increases stability during transportation and reduces damage to tires, leaf springs and frames. The frame is made of durable 16-manganese plate, which greatly increases the load-bearing strength. The rear panel of the compartment is locked with mechanical means. When unloading, the lock hook and the rear panel are automatically opened to avoid blockage during unloading, especially when the stone is unloaded, the rear panel is not hit, and the damage to the vehicle is reduced. The three-axle balanced design is equipped with a mass balance block between the front and rear leaf springs, which can change the disturbance of the front and rear leaf springs to equalize the force of the front and rear axles. The Semi End Dump Trailer is suitable for cargo with a large rest angle. It is important to note that the end dump truck and trailer cannot be more than 12m long. Any truck longer than that may be dangerous.