Well Drilling Bits

Cangzhou Great Drill Bits Co.,Ltd. provides the drill bits from 3" to 36", Rock reamer from 8''- 72'', Such as PDC bit, Tricone bit, Roller bit, Great bit, Diamond Core bit, Bi-center bit, PDC reamer, Hole opener, etc.

Well drilling head is the engineering of rational exploitation and utilization of water resources in strata by using drilling equipment and technology. Groundwater, on the other hand, is water that exists in cracks in the earth's crust or in gaps in the soil. The various states of water buried below the surface are collectively referred to as groundwater.

The Influence of Water Cut Characteristics of Different Structures on Well Yield:

Clean sand and gravel sedimentary rock is the best source of water.

This kind of structure has strong water absorption, high water content and good water permeability.

The mixed layer of sand and gravel.

The sand and gravel mixture is also a water-yielding structure.

Because of the different proportions of sand, it is a secondary water-producing rock.

The lower the sand content, the higher the water yield.

Clay structure.

Although the clay structure holds water well, it is difficult for water to move through it.

This means that the clay structure does not flood the well so it is not an aquifer.

The sandstone.

It refers to the terrigenous clastic rocks whose grain size is 0.0625 ~2 mm and the sand accounts for more than 50% of all clastic particles.

If the clay ACTS as a cement in sandstone to hold the sand together it is a poor water-yielding rock.

Limestone.

It is an excellent source of water in all sedimentary rocks.

Limestone usually has large openings such as underground karst caves that contain high water content but poor water quality.

Basalt.

The earlier beds are dense rather than good water-yielding because they are tightly packed together.

If it's late it has spongy development it's a good source of water.

Of hard rock.

Such rocks as granite, porphyry, and other crystalline rocks are usually poor water producers.

The worst water-yielding beds are metamorphic rocks such as gneiss schist, quartzite, SLATE, and soapstone.

In order to avoid the low efficiency of well drilling, the oil standard water drill bit specification should be selected in the design of the drilling diameter.

The selection of leading drag bits for water well drilling must be beneficial to the processing of reaming assembly cone bit in order to reduce the processing cost of bit.

The effect of drilling parameters on drilling efficiency is weight on bit.

Water Well Drilling Bits Types

Great is dedicated to the design, production, and sales of diverse water well drill bits. The produced models of our water well drill bits for sale are (76mm-660mm) Mill tooth bit and TCI bits. Customers can also customize and assemble their own well drilling bits according to their actual needs.

Great's water well drill bits are available in both composite seals and metal seals, so as to better meet the requirements of different engineering projects. The number of tooth rows, the number of teeth, the height of the teeth, and the alloy tooth profile are also well-designed to provide a better cutting ability for the drilling bit and improve the service life simultane. Available IADC Code of our water well drill bits for sale include 437,517,537,617,637etc.

Well Drilling Bits Price

The price of Great water well drilling bits approximately start from $1000 on the basis of different sizes and types. You are more than welcomed to send your detailed inquiry to us,so that we can offer you the best price for our long term cooperation.

The Selection of Water Well Drill Bits

The weight of the water well drill bits should be determined according to the formation's hardness and softness. Meanwhile, the quality of water well bit, well bore, drilling tool, displacement, and performance of flushing fluid, equipment and power should also be considered.

The Uses of Water Well Drill Bits

When choosing the tricone water well bit, you sho select the Tricone bit type to suit lithology requirements as much as possible, match bit size with drilling design, and use in order of size. In the process of using the water well drill bits, if the phenomenon of rampage occurs, the reasons should be analyzed immediately to check whether the formation changes or the borehole wall collapses. The parameters should also be analyzed and adjusted immediately. If the up-lift bit can't be drilled normally, the up-lift bit should be checked.

The regular analysis of the working conditions of the water well drill bits in the hole is also important for the maintenance of the drill bit. In addition, measures should be taken to control well deviation, reduce the clearance between drilling tools and drilling holes, and play the role of full hole drilling and rigid anti-deviation.

In order to prevent deviation, centralizer and drill collar can be added on the top of the tricone bit.

GREAT can recommend the right type according to your drilling demand.

Recommended Size and Water Well Drilling Bits Types

As one of the leading water drill bit suppliers, we have different water well drilling bits types. There are many water well drill bits for sale online, if you want to know well drilling bits price or borewell bits price, please contact us.