Joyas / Accesorios
PCD & PCBN |
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
0.85μm |
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
|||
2μm |
For good surface finishing |
ET02 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
|
|
√ |
|||
5μm |
ET05 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
302μm |
ET302 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
35μm |
ET35 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of pcd pcbn:
1) Solid CBN
2) CBN with Tungsten Carbide supporting.
PCBN and SBN Grade
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
SBN95Z1 PCBN95Z1 |
20、30 |
0.95 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
SBN90Z PCBN90Z |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
SBN90Z2 PCBN90Z2 |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN80G |
3、5 |
0.8 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN70G PCBN70G |
3、5 |
0.7 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
SBN60G |
1、3 |
0.6 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
SBN55G1 PCBN55G1 |
1、3 |
0.55 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
PCBN Blank
Available specifications
SPEC |
D(Diameter) (mm) |
T(Thickness)(mm) |
t (CBN section thickness)(mm) |
PCBN55G1 |
PCBN70G |
PCBN90Z |
PCBN90Z2 |
PCBN95Z1 |
Ф45×1.2×0.6 |
45 |
1.2±0.05 |
0.5-0.8 |
√ |
√ |
√ |
√ |
√ |
Ф45×1.6×1.0 |
45 |
1.6±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.2×1.0 |
45 |
3.2±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.8×1.0 |
45 |
3.8±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×4.5×1.0 |
45 |
4.5±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Solid PCBN (SBN)
Available specifications
Square
Spec |
Dimension (mm) |
ISO |
Code |
||||||||
L |
Фd |
S |
SBN55G1 |
SBN60G |
SBN70G |
SBN80G |
SBN90Z |
SBN90Z2 |
SBN95Z1 |
||
9.85×3.4 |
9.85 |
9.85 |
3.4 |
SNMN090300 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
9.85×5 |
9.85 |
9.85 |
5 |
SNMN090400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
13×5 |
13 |
13 |
5 |
SNMN120400 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
16.2×8.2 |
<span style="font-size: 12.00 |
Buen trato: comprar del vendedor
Esta página es acerca de los importadores y exportadores de PCD & PCBN Buscar en la categoria : Joyas / Accesorios Buscar en la categoria : pcbn |
Viernes 03 mayo 2024
The 3S New model series high-pressure reciprocating quintuplex pump is mainly used in oil exploration and refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required. Simplify model...
Sábado 27 junio 2015
The 5S series high-pressure reciprocating quintuplex pump is mainly used in oil refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required. Ubicación : ROOM 26, 5/F, THRIVING INDUSTRIAL CENTRE...
Domingo 23 noviembre 2008
Cantidad : 1x20fcl
We can supply Match skillets for Match Factories. Ou Match skillets are made of High quality raw materials for good performance in your Online machines.Ubicación : 209 Pandian Nagar, Thiruthangal, 626130 Sivakasi, Persona a contactar : Rajesh C.t.r., 91 4562 230011