Audio / video
PCD & PCBN
|
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
|
|
|||||||
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
0.85μm |
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
|||
2μm |
For good surface finishing |
ET02 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
|
|
√ |
|||
5μm |
ET05 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
302μm |
ET302 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
35μm |
ET35 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of PCBN:
1) Solid CBN
2) CBN with Tungsten Carbide supporting.
PCBN and SBN Grade
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
SBN95Z1 PCBN95Z1 |
20、30 |
0.95 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
SBN90Z PCBN90Z |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
SBN90Z2 PCBN90Z2 |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN80G |
3、5 |
0.8 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN70G PCBN70G |
3、5 |
0.7 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
SBN60G |
1、3 |
0.6 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
SBN55G1 PCBN55G1 |
1、3 |
0.55 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
PCBN Blanks
Available specifications
SPEC |
D(Diameter) (mm) |
T(Thickness)(mm) |
t (CBN section thickness)(mm) |
PCBN55G1 |
PCBN70G |
PCBN90Z |
PCBN90Z2 |
PCBN95Z1 |
Ф45×1.2×0.6 |
45 |
1.2±0.05 |
0.5-0.8 |
√ |
√ |
√ |
√ |
√ |
Ф45×1.6×1.0 |
45 |
1.6±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.2×1.0 |
45 |
3.2±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×3.8×1.0 |
45 |
3.8±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
Ф45×4.5×1.0 |
45 |
4.5±0.05 |
0.9-1.2 |
√ |
√ |
√ |
√ |
√ |
As a superabrasive ltd, we can offer kinds of diamond dies for sale, anything you need, please leave us a message.
Buen trato: comprar del vendedor
Esta página es acerca de los importadores y exportadores de PCD & PCBN Buscar en la categoria : Audio / video Buscar en la categoria : pcbn |
Sábado 12 julio 2014
Cantidad : 5000 - Precio : 1,50 euros
Bonjour, Vends maillots de bain licence High School Musical. Taille: 128-134-140-146-152-158-164-170. Prix. 1,50 euros par 500 pièces. Mail. nekortex@gmail.com Mobile. 06.52.83.92.08 Mr Ben. Ubicación : 18 rue d'albert, 95140 Garges les gonesses, Persona a contactar : Ben Mr...
Viernes 27 agosto 2010
Cantidad : by contain - Precio : various
We export various high quality Japanese food and beverages, from frozen vegetables, canned food, to gree tea, coffee, and sake. Please visit our website and we are very happy that we can offer various business chances to you.Ubicación : 1-6-8, Koyocho-naka, Higashinada-ku,, 658-0032 Kobe...
Jueves 01 septiembre 2011
Cantidad : 10 - Precio : 250$
Traditional Moroccan lamps, authentic high-quality arts.Handmade by talented master craftsmen.Floor leather lamp, wall lamp in different designs, shapes and colors, for homes and gardens; it is ideal for meditation, romance and parties or just for peaceful serenity and tranquility...