Fiber Optic Switch

The fiber optical switch AGS14 is a non-mechanical designed fiber optic device based on the Faraday effect with Bi-refringent crystal and micro-optical components. Without moving parts in the design, the switch can meet the high requirement on reliability, durability and high switching speed.

Features Of Fiber Optic Switcher

High Speed

Non-Mechanical

High Stability & Reliability

Application Of Fiber Optic Switcher

Fiber Optical Sensing

Switching

Latching

Signal Monitoring

Specification Of Fiber Optic Switcher

Serial (RS-232) Interface

Electrical characteristics: Conforms to the EIA-574 standard (EIA-232 (RS-232), 9-pin) Baud rate: 2400, 9600, 57600, 115200, 230400

Start bit: 1 bit, fixed Data length: 8 bit, fixed

Parity: Odd, Even, or None Stop bit: 1 bit(default)

Connector: DELC-J9PAF-13L6 (JAE or equivalent) Flow control: None

UART bit formats are listed in the following table:

Ethernet Interface

Electromechanical specifications: Conforms to IEEE802.3 Transmission method: 10BaseT/100BaseTX Ethernet Communication protocol: TCP/IP

Connector type: RJ45

Port number used:8080 (fixed)

Configure Network Information

Visit the website http://192.168.1.100/, 192.168.1.100 is a device IP address. The default network information is on the nameplate attached to the device.

Fiber Optic Switcher

Note: Visit configuration website will increase the switch time when the AGS14 is working at switch mode.

The Ethernet port just supports static IP mode, please avoid conflict with other network devices in the same subnet. If the device has been set to the wrong IP and can`t be accessed any more，push the Restore Button for 6 seconds to restore the default settings. When push down the Restore Button, the LED will twinkle until restore succeed.

Data Frame Formats About TCP/UART

A complete frame contains 2 bytes: fixed start byte and command byte. Start byte Command byte

0xF0(Fixed) 1-byte data

Once the client transmits the command, it needs to wait for the device to reply.

AtGrating is a professional supplier for fiber optic sensing. AtGrating offers industrial solutions by providing customized sensors and sensing instruments that add value, reduce uncertainty, and maximize performance from our customer systems.

We also have sorts of fiber optic pressure sensor for sale, if you have needs, please leave us a message.