ICP222-2F-2CI

DIN-Rail Mounting 2-CAN Server

Support 2 CAN ports to 2 100M Ethernet fiber ports

Adopt SW-Ring ring network patent technology and support single ring function. Automatic recovery time from network failure is <20ms</span>

Support multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto

Support 5K~1000Kbps arbitrary baud rate

Support 12~48VDC wide voltage input

Support -40～75℃ wide operating temperature range

ICP222-2F-2CI is a CANserver that has integrated 2 CAN ports and 2 Ethernet ports internally. It can implement interconnection between CAN-Bus network and Ethernet network easily to further extend the communication range of CAN-Bus network. It supports 2 CAN to 2 100M Ethernet fiber port and adopts DIN-Rail mounting which can meet the requirements of different scenes.

CAN server supports various network protocols, such as TCP, UDP, TELNET, SW-Ring, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each CAN supports 4 TCP or UDP session connections and multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto. Moreover, it supports WEB, TELNET, and other access modes. It can provide users with good experience via friendly design of network management system interface, simple and convenient operation.

DIP switch could implement restoring factory setting and accessing terminal resistor. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.

Features and Benefits

Support 2 100Base-FX Ethernet fiber ports

Support 5kbps~1000kbps line-speed non-blocking communication

Support multiple operating modes like TCP Server, TCP Client, UDP and TCP Auto

SW-Ring could implement network redundancy and prevent network storm

Support cross-gateway and cross-router communication

Support time setting for heartbeat and overtime disconnection, which can disconnect idle TCP automatically

Support CAN port status and parameter monitoring, making communication state clear to be seen

Support automatic reconnection from network interrupts to establish reliable TCP connection

Flexible CAN data framing setting can meet user's various needs in data partition

TCP support multi-connection, which enables up to 4 users to monitor and manage CAN device simultaneously

Stand-alone or multi-device communication is supported in UDP mode, which enables multiple users to monitor or manage CAN device simultaneously

Support multiple configuration forms like Windows configuration tool, TELNET and WEB

Ethernet

Standard: IEEE 802.3u for 100Base-FX

Protocol: TCP, UDP, ARP, HTTP, SW-Ring, TELNET, ICMP, DHCP, DNS

Port quantity: 2

Ring network configuration: single ring

Transmission speed: 100M

Interface form: SC/ST/FC

Duplex mode: full duplex

Transmission distance:

Multimode: 2km

Single mode: 20/40/60/80/100/120km

Transmission wavelength:

Multimode: 1310nm

Single mode: 1310nm or 1550nm

Operating mode: 4 sessions, support operating modes like TCP Server, TCP Client, UDP, TCP Auto, advanced TCP Server and advanced UDP

CAN Interface

Standard: CAN2.0A, CAN2.0B

Interface quantity: 2 CAN ports

CAN signal: CANH, CANL

Duplex mode: 2-wire Half Duplex Mode

Baud rate: 2.5kbps-1000kbps

Load capacity: support concurrent transmitting of 110 nodes

Transmission distance: 40m~10km

Interface form: adopt 4-pin 5.08mm pitch terminal blocks

Terminating resistor: optional external 120Ω terminating resistor

Interface protection: 2kVAC isolation protection

Console Port

CLI command line management port (RS-232), RJ45

Configuration Method

WEB configuration management, TELNET configuration, Windows configuration tool

Redundancy Technology

SW-Ring

LED Indicator

Power supply indicator, running indicator, Ethernet fiber port indicator, CAN port indicator

Power Requirement

12~48VDC

3-pin 7.62mm pitch terminal blocks

Support non-polar connection

Power Consumption

No-load: 2.81W@24VDC

Full-load: 3.00W@24VDC

Environmental Limit

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%～95%(no condensation)

Physical Characteristic

Housing: IP40 protection, metal

Installation: DIN-Rail mounting

Dimension (W x H x D): 35mm×110mm×95mm

Weight: 374g

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC 61000-4-4 (EFT, electrical fast transient), Level 4

Power supply: ±4kV

IEC 61000-4-5 (Surge), Level 3

Power supply: common mode±2kV, differential mode±1kV

CAN port: common mode±2kV, differential mode±1kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Certification

CE, FCC, RoHS

Warranty

3 years

Available Models

100M Fiber Port

CAN

Power Supply

ICP222-2F-2CI

2

2

12~48VDC

3onedata provides unmanaged switch, 4G router, 3onedata converter, 10g ethernet switch and etc. For more info, contact us.