Varios / Descuento
Aluminium Forging
|
Model Grade |
5052/6061/7075/2024/ |
Temper |
T6/T651/T6511/T7451/O/H112 |
Diameter |
10mm-150mm;150mm-200mm;200mm-420mm |
Length |
As request;2000mm-3000mm;3000mm-6000mm |
Hardness |
More than 120 |
Alloy or Not |
Alloy |
Surface treatment |
Mill finished or bright |
MOQ |
2MT-3MT; |
Technology standard |
GB/T 3880/ASTM.B209/EN485 |
Grade Model |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Al |
5052 |
0.25 |
0.4 |
0.1 |
0.1 |
2.2-2.8 |
0.15-0.35 |
- |
0.1 |
- |
Remainder |
6061 |
0.4-0.8 |
0.7 |
0.15-0.4 |
0.15 |
0.8-1.2 |
0.04-0.35 |
- |
0.25 |
0.15 |
Remainder |
7075 |
0.4 |
0.5 |
1.2-2.0 |
0.3 |
2.1-2.9 |
0.18-0.28 |
- |
5.1-6.1 |
0.2 |
Remainder |
2024 |
0.5 |
0.5 |
3.8-4.9 |
0.3-0.9 |
1.2-1.8 |
0.1 |
- |
0.25 |
0.15 |
Remainder |
Buy from aluminum forging companies.
Application of Aluminium Forging
The forging process is used in applications where performance and strength are critical requirements.
Forged components are commonly found at points of stress and shock. Pistons, gears and wheel spindles in high performance automobiles and aircraft are often made from forged aluminum.
When forged and heat treated, aluminum forgings exhibit some mechanical properties comparable with steel forgings. The strength to weight ratio is therefore far superior. For example, the 2014-T6 aluminum forging has a typical UTS of 485MPa, exceeding that of many grades of steel forgings, and all commonly used aluminum castings.
Or you can buy anodized aluminium plate.
Buen trato: comprar del vendedor
Esta página es acerca de los importadores y exportadores de Aluminium Forging Buscar en la categoria : Varios / Descuento Buscar en la categoria : forging, aluminium |
Viernes 31 mayo 2024
Cantidad : 600 - Precio : 10
Product Name : Plastic cafeteria Chair, garden chair, Aluminum legs and Table Category : Plastic furniture Material : PP Color : Red, Blood red, blue, brown. orange, white. Usage : Suitable for using in office, garden, outdoor. Ubicación : 111/39/4 Tay Lan Street, Tan Tao ward...
Viernes 16 mayo 2014
Cantidad : 500000pcs - Precio : $1-25/pc
SLA Y SLS Por qué utilizar estéreo litografía? Estéreo litografía es muy similar a la sls( sinterización selectiva por láser) proceso de prototipado. Es s mejor utilizar sla, cuando acabado superficial y apariencia general directamente desde la máquina es el factor más importante...
Miércoles 15 abril 2015
Cantidad : Inquiry - Precio : USD 0.25-0.5/Watt
Dimensions : 156mm x 156mm ± 0.5mm. Thickness (Si): 180μm ± 20μm / 200μm ± 20μm. Front : Silver bus bars Silicon nitride anti-reflection coating. Back : Silver bus bars Full-surface aluminum BSF. Ubicación : 5F,No.2.Sec.4.JhongyangRd,TuchengCity.Ta ipei County 236,Taiwan R.O.C...