Cartridge Rolls With Shank 25/32inch

Table of Cartridge Rolls with Shank 25/32inch

Cartridge Rolls with Shank 25/32inch Specification:

Diameter: 25/32 inch=20mm

Max. RPM: 12000 RPM

Raw Materials: Aluminum Oxide(AO), Zirconia(Z)

Grit Size: 40#/60#/80#/100#/120#/150#/180#/240#/320#/400#/600#

Shank Diameter: 3mm、6mm (Other sizes can be customized)

Cartridge Rolls with Shank 25/32inch Materials that can be worked:

Titanium

Other non-ferrous metals

Hard non-ferrous metal

Copper

Soft non-ferrous metal

Brass

Stainless steel (INOX)

Grey/nodular cast iron (GG/GJL, GGG/GJS)

Annealed cast iron

Thermoplastics

Fiber-reinforced duroplastics (GRP, CRP)

Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)

Steel, cast steel

Cartridge Rolls With Shank 25/32inch Applicable Industries

Applications

Leveling

Deburring

Work on edges

Sharpening

Weld dressing

Fine grinding in multiple steps

Cartridge Rolls With Shank 25/32inch Applicable Industries

Safety Warning of Cartridge Rolls With Shank 25/32inch

Instructions:

Safety Warning of Cartridge Rolls With Shank 25/32inch

Please try to choose an operation indoor environment and wear protective guards and goggles.

Never exceed the recommended maximum permitted rotational speed for safety reasons.

In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.

Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.

Safety Warning:

The clamping length between shank and non woven pad grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.

As a reliable abrasive products company, we can offer kinds of related products for sale, if you have needs, please contact us.