![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Varios / Descuento
CSD-N150 Sliding Door
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
System |
Sliding Door(Non-Thermal Break) |
|
Model No. |
CSD-N150 |
|
Material |
Aluminum Alloy/Glass |
|
Hardware |
Chinese top brand(Kin Long)/Germany brand |
|
Glass Type |
Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
|
Cooperated Glass Brand |
Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/ TaiwanGlass |
|
Surface Treatment |
Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
|
Profile Brand |
6063-T5/6063-T6 |
|
Thermal Profile |
Non-Thermal Break |
|
Standards |
In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
|
Application |
Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
|
System Customization |
Available |
Data of CSD-N150 Sliding Door
Testing Data of CSD-N150 Sliding Door
|
Test |
Pressure |
Results |
|
Preloading(Clause 8.2.2 of AS/NZS4284: 2008) |
+1.81kpa |
No separation, plastic deformations or deleterious was observed. |
|
-2.68kpa |
||
|
Preliminary Water Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
+543kPa |
There were no leaks. |
|
Preliminary Water Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
272-300-272 (Pa) |
There were no leaks. |
|
362-724-362 (Pa) |
||
|
543-1086-543 (Pa) |
||
|
Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284: 2008) |
+1.81kpa |
No glass breakage, no collapse and permanent deformation were observed. Deflections of mullions and transoms as well as glass panel were within the allowable deflection limits. |
|
-2.68kpa |
||
|
Air Infiltration Test (Clause 8.4 of AS/NZS 4284: 2008) |
+/-150Pa |
The rate of air leakage of the specimen was within the allowable values. |
|
Operating force test (AS 2047-2014, Clause 2.3.2.4) |
-- |
The operating force of the specimen was within allowable value. |
|
Water Test under Static Water Test under Static 4284: 2008) |
+543Pa |
There were no leaks. |
|
Water Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284: 2008) |
272-300-272 (Pa) |
There were no leaks. |
|
362-724-362 (Pa) |
||
|
543-1086-543 (Pa) |
||
|
Structural Proof Test at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284: 2008) |
+2.79kpa |
No collapse of the test specimen was observed under the specified pressure. |
|
-4.15kpa |
Thermal Data of CSD-N150 Sliding Door
|
NFRC procedures |
NFRC100SB, NFRC200-2010 and NFRC500-2010 |
|
Software tools |
THERM 7.4.3.0 and WINDOW 7.4.6.0 |
|
Configuration |
6mm LB13-45HS+12A+6mm Clear HST |
|
Panel Dimension |
1900mm Wide x 2750mm High |
|
Frame |
Painted Aluminum |
|
Panel U-value |
3.771W/m2k |
|
Visible Light Transmission |
0.28 |
|
Condensation Resistant |
19.1 |
Frame Data of CSD-N150 Sliding Door
|
Parts Location |
Frame Area/m2 |
Edge Area/m2 |
U-Value(Frame) |
U-Value(Edge) |
|
W/m2k |
W/m2k |
|||
|
Left Header |
0.121 |
0.049 |
7.9102 |
2.2952 |
|
Left Jamb |
0.326 |
0.154 |
11.1172 |
2.0309 |
|
Right Header |
0.118 |
0.049 |
9.5335 |
2.1194 |
|
Mullion |
0.117 |
0.3 |
22.6254 |
1.9365 |
|
Right Jamb |
0.341 |
0.154 |
8.7912 |
2.1402 |
|
Left Sill |
0.11 |
0.049 |
7.784 |
2.2897 |
|
Right Sill |
0.113 |
0.049 |
11.4681 |
2.1552 |
Glass Data of CSD-N150 Sliding Door
|
Glass Data: 6mm LB13-45HS+12A+6mm Clear HST |
|||||||
|
Visible Light |
SHGC |
SC |
NFRC U-value |
STC |
|||
|
W/m3k(Argon) |
|||||||
|
T% |
R-out% |
R-in% |
Winter |
Summer |
|||
|
40 |
20 |
13 |
|
0.26 |
1.43 |
1.36 |
36 |
Benefits of CSD-N150 Sliding Door
High security level
Modern design
Slim lines for sliding typologies with maximum visibility
Great ease of use and high functionality
Increased static loads and functionality in case of severe weather conditions
Exceptional quality with certified performances
Exceptional sound insulation
Ideal for wide spans
Recommended CAS Facade Products
Our products are designed to snap together perfectly, organically or with the help of couplers. This ensures a streamline design throughout your project. Below is a list of compatible products.
As one of aluminium sliding doors manufacturers, we will do our best to meet all the needs of customers.
If you want to know more details of residential building facade design, please visit our website.
Buen trato: comprar del vendedor
|
Esta página es acerca de los importadores y exportadores de CSD-N150 Sliding Door Buscar en la categoria : Varios / Descuento Buscar en la categoria : door, sliding, n150 |
Tuesday 23 December 2025
Cantidad : 99999 - Precio : 1,00 €
Argile Rouge ARGANisme L'argile rouge est riche en fer et en oligo-éléments. De quoi favoriser la circulation sanguine et redonner de la luminosité à la peau. Elle nettoie et purifie également la peau en la débarrassant de ses impuretés. Idéale pour les peaux ternes ou sèches En...
Wednesday 13 January 2016
Established in 2000, Focus CNC Co., Ltd. provides series of CNC Lathe Machinery, CNC Lathe, live tool CNC Lathe, mill turn Lathe and CNC turning machine. Due to our principle of “Humanity, Technology and Precision” in mind, we keep breaking through to become one leading Industry...
Wednesday 14 September 2016
Cantidad : 5000 - Precio : 50,00 €
Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...