Informática
Anamorphic Prisms |
Material: |
N-SF11, H-ZF13 Grade A optical Glass |
Dimension Tolerance (mm): |
+/-0.2 (General), +0/-0.1 (High Precision) |
Theta: |
q = 29°27'±30" |
Flatness (per 25mm@633nm): |
λ/2(General), λ/10 (High Precision) |
Clear Aperture: |
>80% (small size),>90%(large size) |
Surface Quality: |
60/40 (General), 10/5 (High Precision) |
Bevel (mm): |
0.1-0.5 |
Coating on input and output sides: |
MgF2 single layer on perpendicular surface or AR coating--Unpon Request |
Note for Anamorphic Prisms
Anamorphic prism is available upon requirement.
Note: The prism is counted quantity at every piece. It shall be used as pair (two pieces).
Buen trato: comprar del vendedor
Esta página es acerca de los importadores y exportadores de Anamorphic Prisms Buscar en la categoria : Informática Buscar en la categoria : prisms, anamorphic |
Jueves 28 mayo 2015
Cantidad : 1 Set/Sets - Precio : US $ 5,000 - 35,000
Advantages of shredder for sale 1. The shredder for sale for sale can shred various bulk materials, basket materials, pipe, plate, sheet, tire, big roll film, which are difficult to be shredded by single shaft shredder. 2. The frame is combinational structures, made from precision...
Jueves 21 abril 2016
Cantidad : 999
Corner Cube Retro Reflector operates on the principle of Total Internal Reflection (TIR). An incident beam will be reflected parallel to itself by the three roof surfaces. The reflection is insensitive to the incident angle, even when the incident beam enters the prism off normal axis...
Jueves 21 abril 2016
Cantidad : 999
Polarization Beamsplitter Cube are constructed by cementing two precision right angle prism together with appropriate interference coating on the hypotenuse surface. The absorption loss to the coating is minimal transmission and reflection approach 50% (average) though output is...