B2B Servicios
PCD & PCBN
|
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
0.85μm |
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
|||
2μm |
For good surface finishing |
ET02 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
|
|
√ |
|||
5μm |
ET05 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
302μm |
ET302 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
35μm |
ET35 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of PCBN:
1) Solid CBN
2) CBN with Tungsten Carbide supporting.
PCBN and SBN Grade
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
SBN95Z1 PCBN95Z1 |
20、30 |
0.95 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
SBN90Z PCBN90Z |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
SBN90Z2 PCBN90Z2 |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN80G |
3、5 |
0.8 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN70G PCBN70G |
3、5 |
0.7 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
SBN60G |
1、3 |
0.6 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
SBN55G1 PCBN55G1 |
1、3 |
0.55 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
If you want to know more about material pcd and pcbn material, please visit our website.
As one of abrasive powder suppliers, we can provide kinds of diamond powders for sale, if you are interested, please contact us.
Buen trato: comprar del vendedor
Esta página es acerca de los importadores y exportadores de PCD & PCBN Buscar en la categoria : B2B Servicios Buscar en la categoria : pcbn |
Miércoles 17 junio 2015
Cantidad : 100 - Precio : $3,100.00
- MIMAKI APC-130 Apparel Cutter - 2 Tasks - 1 Machine APC-130 is based on Mimaki's extensive know-how within the cutting market and the company's highly appraised CG-series of cutting machines for the sign industry. Equipped with various functionality required by the apparel and...
Viernes 21 septiembre 2007
Cantidad : 40ft CTN
WE ARE WHOLESALERS AND EXPORTERS OF MIXED USED LIGHTWEIGHT SUMMER CLOTHING IN 1100 LBS LARGE BALES, WE LOAD 40FT HIGH CUBE CONTAINER FOR EXPORT. OUR QUALITY CLOTHING COME STRAIGHT FROM WEALTHY & UPSCALE NORT AMERICA HOMES. QUALITY IS OUR GAME AND CLIENTS SATISFACTION IS OUR CONCERN...
Jueves 02 mayo 2024
Cantidad : 500 pcs - Precio : 5 euro
*experiences of manufacture & supplier of top quality PVC handbags. *top quality PVC handbag *lowest Price, good service, high quality *mini order request and drop ship available *shipping worldwideUbicación : F. Robbelaan 27, Den Haag, Persona a contactar : Stanley Heerenveen, +31...