4068130 ultra-thin lithium polymer batteries

4068130 ultra-thin lithium polymer batteries

The rated capacity: 4200 (mah)
Processing custom: is
Charging current: 2-3 (A)
Installation dimensions: 4 * 68 * 130 (mm)
Applicable type: The tablet
Product certification: ROHS
Standard voltage: 3.7 (V)
Battery type: The lithium battery
Type: 4068130

A rechargeable electric, electric pool

1.1 charging current, charging current shall not exceed the maximum charging current specification rules (generally below 0.5 ~ 1.0 C or C), use the recommended value is higher than the current charge would be likely to cause the battery charge and discharge performance, mechanical performance and safety performance problems, and could lead to a fever or leakage.

1.2 charging voltage, charging voltage shall not exceed the prescribed limits voltage (4.2 V/monomer battery) 4.25 V to the highest limit each battery voltage.Series of battery pack, must adopt balance charge or each battery charging method alone, at any time must make the pledge that we shall add on opposite sides of the single battery voltage should not exceed 4.25 V (by tandem charge shall be strictly forbidden, otherwise may have to the battery charge and make the battery leakage, fire and explosion; user consequences due to wrong battery).

1.3 charging temperature: the battery must be in the product specifications stipulated by the environmental temperature range, otherwise the battery is susceptible to damage.When your battery surface temperature anomalies (refers to the cell surface temperature more than 50 ℃), should immediately stop charging.

1.4 reverse charge: correct connection is the cathode of the battery, it is strictly prohibited to reverse charge.If it is negative to the, will not be able to charge batteries.Reverse charge will use fatal damage to the battery, even cause fever, leakage, fire and explosion.

Second, the electric pool to put electricity

2.1 discharge current, discharge current shall not exceed the specifications (admit) maximum discharge current, large current capacity discharge can lead to collapse and lead to a battery overheat.

2.2 discharge temperature: the battery must be within the specification of working temperature range.When the battery surface temperature over 70 ℃, to stop using, until the battery cooling to room temperature.

2.3 discharge electricity: discharge can cause cell damage, discharge shall not make monomer battery voltage is lower than 2.75 V.

Three, storage

Battery should be stored in a cool, dry environment, long-term storage battery (more than 3 months), suggest that at low temperature for 10 to 25 ℃ and humidity without corrosive gas environment.The process of long-term storage batteries once every six months should be charged, to ensure that each cell voltage in the range of 3.6 ~ 3.9 V.

Four, the things he notice items

U due to battery USES the soft packing, the aluminum foil packing material is easy to scratch, so it is prohibited to use sharp objects collision cell.

U it is prohibited to fall, impact, bending batteries, lest cause a fire.

U it is forbidden to battery anode directly is short circuit, otherwise may cause the battery severely damaged, or even cause fire.

U in any case shall not remove the battery, otherwise it will lead to internal short circuit, resulting in strengthening and fire.

U are strictly forbidden to put battery into the fire, lest produce risk.

U never put battery into liquid, water, etc.

Taken to prevent violent vibration and impact during the transit or extrusion, handling to should take put down gently, and the battery must use the soft packing materials protection.

Factory direct sales, quality assurance, the good faith management