CHINA SINGULAR Composite Insulating Foam Cement Panel

Composite Insulating Foam Cement Panel

As a new type of insulated, non-ignitable and durable inorganic wall material with features of high strength, light weight, heat preservation, insulation and low water absorption, fire prevention and weather-proof, this product is the most ideal green energy-saving construction product in current times. According to the dry density and thermal conductivity, it can be classified into typeⅠand type II, while by its distinct foaming principles, it can be named as physical foam and chemical foam.

I. Application:

Heat insulation materials in the internal and external wall of construction, as well as in ground, roof, balcony ceiling and cellar ceilings of construction.

II. Features:

1. Superior fire prevention: as a kind of non-ignitable, inorganic heat insulation material at A level, it can remain non-ignitable and non-toxic under high temperature or fire conditions. It is safe and environmentally friendly without radioactivity.

2. Good heat insulation: due to its light weight, low thermal conductivity and water absorption but high coefficient of energy storage, together with its percentage of close area being over 95%, it enjoys good thermal insulation performance and is the most ideal materials used for insulation of heat, thermal and sound currently.

3. High compressive strength and strong binding power: compressive strength > 0.5MPa; good compatibility in system material; high adhesion to wall; low drying shrinkage value of panel ; high wind presssure resistance, without empty drum and cracks.

4. The same life cycle with buildings: currently, most of the thermal insulation materials' life is about 20 to 25 years or even shorter. The cost of the second and the third construction will be much higher which always does great harm to the environment as well as to human life and production. But this product is stable as well as highly carbonation-resistant, ageing-resistant, freeze-resistant and weather-proof, whose life can be as long as the buildings, hence the full-life cost is much lower.

5. Easy construction and short-time construction: dedicated mortar directly bond, easy to operate. And to start the construction simultaneously can greatly shorten the construction period.

6. Non-toxic and harmless, green and energy-saving: made of original materials such as cement and fly ash, it can stay non-ignitable and non-toxic under high temperature. It is safe and environmentally friendly and can be used as recycling product supported by national industrial policy.

III. Executive standard:

Regulations on the Application Technology of the External Wall Thermal Insulation System of the Composite Foaming Cement Panel (SU JG/T041-2011)

IV. Product Indexes:

Performance indexes of the foaming cement panel

V. External heat insulation system construction of external wall:

VI. Precautions:

1. Before paving the panel, you should clear the surface dust.

2. The paving of the panel should start from the first floor, and the level line should pop up from the position 300mm away from the plinth ground from the bottom to top to pave it horizontally and transversely. The staggered joints between panels of upper and lower rows should be 1/2 the panel length.

3. The paste between the panel and the basic wall should be with no space left. An iron float should be used to coat every panel with a layer of over 3mm adhesive mortar evenly when pasting, and the pasting area should be more than 95%. You should paste and press the mortar to the base timely and to make sure that the gap of joint between panels should be no large than 1mm.

4. When composite foaming cement panel is in the corner of wall, you should pre-arrange the dimension and cut it to a proper size and vertically connect them in cross shape to ensure its perpendicularity with the corner.

5. When pasting the external corners around the window frame and the outer corners of wall, you should stretch out the vertical baseline to ensure the perpendicularity of the external corners. And the foaming cement panels to be pasted to the door and window edges should be cut into “L” shape and no split joint should be allowed. The gap between joints and window edges should be no less than 100mm.