Bienes de equipo
Pneumatic Terminal Crimping Machine
-
* Force: 20Ton
* Applicable Scope: 1-200mm² wire
* Stroke: 50mm Adjustable
* Power: 220V/110V
* Size: 60*28*60cm
-
* Crimping range: 10-300mm2
* Air pressure range: 0.5-0.8MPa
* Output: 9.0T
* Overall dimension: 400*200*210mm
* Weight: 10.5kg
-
* Crimping range: non-insulated terminals≤10mm²
* Pre-insulated terminals: ≤6mm²
* Tube-shaped terminal: ≤25mm²
* Output: 13.5kg
* Pressure range: 0.4-1MPa
-
* Crimping range: 0.5-16mm²
* Air pressure range: 0.5-0.8Mpa
* Output: 1.8T
* Voltage range: AC 220V
* Weight: 6kg
* Overall dimension: 275*128*145mm
-
* Range of Application: 6mm(insulated terminal)//35mm2(Furcate terminal)
* Air pressure range: 0.4-1Mpa
* Output force: 13.5KN
* Voltage range: AC 220V
* Weight: 6.5kg
* Overall dimension: 260*120*140mm
-
* Crimping range: Non-insulated terminal 0.5-50mm² ≤
* Air pressure range: 0.6-1Mpa
* Output: 2.5T
* Voltage range: AC 220V
* Weight: 6kg
* Overall dimension: 286*125*165mm
-
* Crimping range: Tube terminal 0.08-120mm²
* Air pressure range: 0.5-0.8Mpa
* Output: 2.5T
* Voltage range: AC 220V
* Weight: 6.5kg
* Overall dimension: 360*125*165mm
Operation steps of terminal machine
1. Turn on the switch of the terminal crimping machine source, and the power indicator lights.
2. Pay attention to whether there is a noticeable difference in the inside and outside of the machine. If there is a suspension, please check whether the maintenance is needed.
3. Choose and install the knife: it is operated by the designated personnel, and it is necessary to perform the manual comparison with the selected blade before loading the knife. It can be operated without error. Knife installation is completed, the manual test must be used. Firstly turn off the terminal mechanical and electrical source, cut touch button, using a dedicated plate loom, master-slave pulley. The terminal machine stamping trip to maximum, for that hand did not move, considering whether stress or other problems, checking the debug to be OK. The lock screws should be checked and confirmed before the operation.
4. Loading: Install the terminals that need to be hit, use the Allen wrench to adjust feed clamp, and the terminal can easily pass, visual feed position whether appropriate, if not, adjust it, using the Allen wrench to loosen feeder lock screw, a screw dynamic adjustment of the level. Until it is in the best status, then lock feeder and lock screw, begin to work.
5. Testing tension: After the machine is OK, try to take waste wire, tensile test, the main reference value to see "the pull test table" for the specific operation method is as follows, press the tension test the zero key to zero. The terminal wire clip will need to be tested. If the test strain is beyond the scope of standards, the mechanics will adjust it again until reaching the standard value.
6. Trial 10 PCS is sent for the first IPQC to be confirmed that the inspection is OK, which can volume production. In the process of production, the operator must self-check whether the terminals having the plastic bags, hanging, etc. are poor, testing a terminal tensile every 1 hour.
7. Tidy up fine products and waste products after production, cleaning up the surrounding environment sanitation of the machine station.
Contact Info
Ubicación : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu, Persona a contactar : Lee Salome, 0086 0512 57169166
Inscrito el 17 abril 2018
Buen trato: comprar del vendedor
Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado. Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Miércoles 01 enero 2025
Cantidad : 25 tonnes - Precio : A determiner
CUBITAINERS DE GEL DOUCHE + LIQUIDE VAISSELLE + LAVE-LINGE DE TRES GRANDE MARQUE - 15 cubitainers de 1 000 l SOCIETE ATOUT NEGOCE - destockage, valorisation et réemploi des produits. ENTREPOT: 12 - 14 rue Fresnel ZAI PARIWEST 78310 COIGNIERES- MAUREPAS Port: 06.16.59.07.14 Tél: 09...
Jueves 01 agosto 2013
Cantidad : moq:1pcs - Precio : USD594
Get stunning images with this High-spec Full HD Memory Camcorder, capable of 1920x1080/50P recording and loaded with F1.2 Super Bright & 29.5mm Wide Angle JVC HD GT LENS and Back-illuminated CMOS Sensor. Built-in Wi-Fi allows Live Monitoring via Smartphone, videos and stills to be emailed...
- 999077 - HongKong
- +85 2 23 25 18 67
- +86 13501567844
Martes 03 abril 2007
CRM SA Contacto : M. Mehmet Cecen Dirección: 7 grande rue luxemburgo, l 1661 Luxemburgo Apisonadora para el pelo de la gama profesional PROLISS. 100 W / 200°C Regulador de temperatura Placa 100% cerámica plena Pedido mínimo 300 piezas Precio unitario degreciente hasta 17 euros...
- cmrsa
- l 1661 - luxembourg
- +33 4 74 93 57 81
- +33 6 81 82 88 55
|