![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
B2B Servicios
POWSIL-59223 |
|
Property |
Value |
|
Physical Form |
Liquid state |
|
Appearance |
Clear, pale & yellowish |
|
Solid Contents (wt%) |
55.0-58.0 |
|
Viscosity (25°C, cps) |
<1000</p> |
|
pH (25°C) |
4.0-6.0 |
|
Flash Point(°C, Open) |
>100 |
|
Diluents |
Water |
|
Gravity(25°C) |
0.993 |
|
Ionic |
Slightly cationic |
Application
POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water into any grades wihout additional emulsifying process.
Micro-emulsion for 30.0% of POWSIL-59223
Formulation:
|
POWSIL-59223: |
30% |
|
Water: |
70% |
Procedures:
Charge water into a tank and start to stir;
Add POWSIL-59223 gradually under stirring;
Continue to stir for 5-10 min after all addition;
Clear micro-emulsion will be obtained at end of this procedure.
POWSIL-59223 can be used as received or pre-diluted with water before applying.
Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing.
Pad-dry-cure process
|
Dosage: |
10~20g/L for light fabric or 25-50g/L for heavy fabric |
|
pH: |
5.0 ~ 7.0 |
|
Temp.: |
Ambient temperature |
|
Dry/Cure: |
120-170 ºC for1-3min |
Exhaustion process
|
Dosage: |
1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric like terry towel |
|
Liquor ratio: |
1/10-1/20 |
|
pH: |
5.0 -7.0 |
|
Temp.: |
Ambient temperature |
|
Time: |
10-30 min |
|
Spinning & Drying: |
100 ~ 170 ºC for 1-3 min |
Garment washing process
|
Dosage: |
1.0 -3.0% on the weight of garment |
|
Temp.: |
Ambient temperature |
|
Time: |
30 ~ 60 min |
|
Spinning & Drying: |
100-130 ºC for 3-5 min |
Stripping:
POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation is as follows:
|
NaOH: |
5g/L |
|
LABS (30%): |
2-5% |
Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water.
Packing and Storage
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.
As a silicone producer, we will offer high quality products to you.
Buen trato: comprar del vendedor
|
Esta página es acerca de los importadores y exportadores de POWSIL-59223 Buscar en la categoria : B2B Servicios Buscar en la categoria : powsil |
Tuesday 20 January 2026
Automatic Gear Pump Liquid Filling Machine FP-465 is designed and engineered to produce outstanding quality and precision filling suitable for various products like shampoo, hot sauce, lubricant oil etc. FP-465 can also replace piston or peristaltic module for the flexibility of filling demands...
Wednesday 17 February 2016
Cantidad : 1000MT - Precio : $1200/MT/ CIF
- Description - PTT dried fruit are 100% freeze-dried fruit, nothing else is added. Absolutely NO additives or preservatives - a natural, healthy, delicious fruit snack made from real fruit and packed with the same nutrition as fresh fruit. Our freeze dried fruit are perfectly...
Tuesday 20 January 2026
Dual Piston Volumatical Filling Machine FP425. available for working independently on each system. Cylinder Volume can be customized based on customer's requirement. FEATURES: - Filling volume can be customized based on customer's requirement - Each piston system can be set independently...