B2B Servicios

Jueves 26 octubre 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Automotive Window Frame Mould Automotive car window mould has many advantages including: 1. Reducing the modification times and shortening the development cycle; 2. Improving product quality, solving the product size issue until meeting the drawing requirements. As a custom plastic...

Jueves 26 octubre 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Automotive Water Intake Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Jueves 26 octubre 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Large drop of automotive mold top and bottom; The mold manufacturing technology is complicated; The injection system is many and complicated; The mold cost is ver high. AUTOMOTIVE MOLD TYPES Automotive AC Air Outlet The air outlets of automotive AC are generally assembled by multiple parts...

Jueves 26 octubre 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Auto Parts Mould Automotive Parts Mold features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2...

Jueves 26 octubre 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the mold at different times, the controller is divided into a single air circuit, double air circuit, and four air circuits, each gas path during Gas-assisted injection mold moulding can...

Jueves 26 octubre 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Drip Tip Mold 2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; 3. Good product consistency and low defect rate. As a mold manufacturer, we can offer sorts of overmolding...