B2B Servicios

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL ASTM A514GRJ A514GRK A514GRM A514GRP A514GRQ A514GRR A514GRS A514GRS A514GRT STEEP PALTE ASTM A387 Gr 22L CL 1 is a chromium molybdenum alloy steel plate intended primarily for welded boiler and pressure vessels designed of elevated temperature service. The Cr content 2.25 %...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL ASTM A515GR60 A515GR65 A515GR70 STEEL PLATE ASTM A515 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service. 1.STEEL PLATE: A515GR60 A515GR65 A515GR70 2. Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL ASTM A516 GRADE 70|A516 GRADE60|A516 GRADE65 STEEL PLATE ASTM A516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASTM A516 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL ASTM A517GRA A517GRB A517GRE A517GRF A517GRH A517GRP A517GRQ A517GRS STEEL PLATE ASTM A517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. The steel shall be killed and shall conform to the fine austenitic grain size requirement...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL ASTM A662GRA A662GRB A662GRB A662GRC STEEL PLATE ASTM A662 standard specification for pressure vessel plates, carbon-manganese-silicon steel, for moderate and lower temperature service ASTM A662 plates over 40mm in thickness shall be normalized. Plates of Grades B and C, 40...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL ASTM A514 Grade J,A514 Grade K,A514 Grade M,A514 Grade P,A514 Grade Q,A514 Grade R,A514 Grade S,A514 Grade S,A514 Grade T STEEP PALTE ASTM A514 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service. STEEL PLATE: A514 Grade J...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL EN S235JR S235J0 S235J2 S355JR S275JR S355J0 S355J2 S355K2 STEEL PLATE 1.STEEL PLATE: S235JR S235J0 S235J2 S355JR S275JR S355J0 S355J2 S355K2 2. Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 DIMENTION: Thickness 8mm-300mm, Width: 1500-4020mm, Length...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL JIS G3103 SB410 SB450 SB480 SB450M SB480M STEEL PLATE JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and cold temperatures. This standard covers steel SB410...

Saturday 18 May 2013

Cantidad : >=1 - Precio : No notice

Grupo Duch es una empresa de creación de prototipos maqueta y rápida profesional, con sede en Xiamen con sucursales en Suzhou y Beijing.Duch operación del molde cumple con ISO9001 de instrucciones del sistema de calidad y los requisitos desde octubre de 2008. Producción de fundición...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL JIS G3115 SPV235 SPV315 SPV235 SPV410 SPV450 SPV490 STEEL PLATE JIS G3103 specifies the hot rolled steel plates of carbon steel and molybdenum alloy steel to be used for boilers and pressure vessels, excepting those to be used at room and cold temperatures. This standard covers...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL EN 10028-6 P460QL1 P460QL2 P500Q P500QH P500QL1 P500QL2 STEEL PLATE EN10028-6 P355Q standard specification forWeldable fine grain steels, quenched and tempered . P355QGrade has a good weldable and used in high temperature equipment and pressure vessel. 1. STEEL PLATE: P460QL1...

Saturday 18 May 2013

Cantidad : 10000000t - Precio : 900usd

SELL EN 10028-6 P690Q P690QH P690QL1 P690QL2 STEEL PLATE EN10028-6 P355Q standard specification forWeldable fine grain steels, quenched and tempered . P355QGrade has a good weldable and used in high temperature equipment and pressure vessel. 1. STEEL PLATE: P690Q P690QH P690QL1 P690QL2 2...

Friday 17 May 2013

Cantidad : 106272 - Precio : 0,33 €

stock de 4320 pak de 24(106272 unite) fiche d expiration 12-07-2014 commande minima contenaire de 20p prix de 7,92€/pack de 24 unite cordialement Ubicación : peris y valero n73 p30, 46006 valencia, Persona a contactar : Said Atil, +34 6 32 42 87 09

Friday 17 May 2013

Cantidad : a large nu - Precio : to be confirmed

Siphonic One-piece Toilet Size: 620X360X690mm S-trap,305 or 400mm Roughing-in Ubicación : dgsgfsdh, 063000 fddfdgfd, Persona a contactar : LEE lli, 7767844563

Friday 17 May 2013

Cantidad : a large nu - Precio : to be confirmed

Induction Wall-hung Urinal Size: 365X275X610mm P-trap/S-trap Ubicación : dgsgfsdh, 063000 fddfdgfd, Persona a contactar : LEE lli, 7767844563

Friday 17 May 2013

Cantidad : a large nu - Precio : to be confirmed

Induction Wall-hung Urinal Size: 460X350X820mm P-trap/S-trap Ubicación : dgsgfsdh, 063000 fddfdgfd, Persona a contactar : LEE lli, 7767844563

Friday 17 May 2013

Cantidad : per order - Precio : very competitive

CARBON SPIRAL PIPE OD: 8inch--126inch WT: 5mm--30mm Material: Gr.B--X80 Annual Capacity: 1000000tons Product Name CARBON SPIRAL PIPE Specification Outside diameter: 219mm(8inch)--- 3200mm(126inch) Wall thickness: 5mm--30mm Production Line 9 production lines Annual Capacity 1,000,000Tons...

Friday 17 May 2013

Cantidad : 300 MT - Precio : USD3000

Stainless Steel Pipe/Tube 1) Pipe diameter: 6mm-630 mm pipe thickness: 0.8mm-25mm 2) Grade:   304,304L, 316,316L, 321,317L, 310S, 904L and so on. 3) Standards: ASTM/ASME/DIN/JIS and etc 4) Applications range: for use in the petroleum, chemical, medical equipment, boiler heat-exchanger...

Friday 17 May 2013

Cantidad : 300 mt - Precio : USD3000

Email: beryl.stainless(at)gmail.com     Product Specs OD:  NPS(1/8"-8")   6-219mm TH:  5s-160   Length:  up to 20m (U-bend) nbsp;tubes) Materials:  321/321H,304/304L/304H/304LN,316/3 16L,310S,317/31 H,904L,duplex...

Friday 17 May 2013

Cantidad : per ton - Precio : USD565

Product name Construction steel bars Standard BS4449 Grade460 , ASTM A615 G60&G40 , JIS SD390, DIN 488-1 500ST ,GB HRB400 Material 20MnSi Diameter 8mm-50mm Length 6m,9m,12m or coil Application Construction industry with all types of reinforced concrete structure etc...

Friday 17 May 2013

Cantidad : 300 MT - Precio : USD 3000

Description: 304L Stainless steel pipe, seamless steel pipe, stainless steel tube, steel pipe Standard: ASTM A213, A312, ASTM A269,ASTM A778, ASTM A789, DIN 17456,DIN17457,DIN 17459, JIS G3459, JIS G3463, GOST9941, EN10216, BS3605, GB13296 Chemical Composition: C≤0.035,Mn≤2.00,Si≤0...

Thursday 16 May 2013

Cantidad : 100 m2 - Precio : 35 usd/m2

The stainless steel mesh screen with all microns Materila: SS 202/304/304L/310S/316/316L Weave pattern: plain /twill/ Dutch weave Wire dia: 0.02mm--2.0mm Mesh count: 1---635 mesh/inch Standard roll: 1x30 m/roll Application: Sieving screen, window security screen, cabinet wire mesh...

Thursday 16 May 2013

Cantidad : 1 - Precio : 1,00 €

  Low temperature crack resistance of asphalt pavement ability to resist low temperature shrinkage cracks. It has two forms: one is due to the sudden change in temperature caused by the surface layer temperature shrinkage cracking caused by temperature stress exceeds the tensile...

Thursday 16 May 2013

Cantidad : 1 - Precio : 1,00 €

Warm mix of asphalt is a new technology of green road construction. Compared with the traditional hot mix asphalt (HMA), the mixing and compaction temperatures are relatively low, energy consumption and emissions is relatively small and has good road performance for warm mix asphalt (WMA)...

Thursday 16 May 2013

Cantidad : 250 - Precio : 500€ / climatiseur

GESTIONA STOCKS CLIMATISATION Cassette Split pompe à chaleur. Quantité: 250 unités Commande minimum : 10 unités Prix: 500€ / unité + TVA ( Exworks Algete) Spécifications techniques adjoints Non à la vente en Espagne . Cordialement, Ubicación : Poligono Industrial Camporroso Sur...

Thursday 16 May 2013

Precio : FOB Shanghai, USD 14

1. Grands: Q500, Q550, Q690, Q890 A572Gr42, A572Gr50, A572Gr60, , A573Gr65, A573-Gr70 S460Q, Q460QL, S620Q, S620QL, S690Q, S690QL, S890Q, S890QL 2. Specifications: Thickness: 6mm-450mm, Width: 1500mm-3500mm, Length: 3000mm-18000mm 3. Delivery Condition: HR, CR, N, T, N+T, Q+T...

Thursday 16 May 2013

Cantidad : 500 MT/ mo - Precio : FOB Shanghai, USD 10

1. Steel Standards: JISG3106, DIN17100, DIN17102, ASTM, EN10025, EN10113, BS4360, ISO630, ISO4950-2, ISO4950-3. 2. Steel Grade: A572Gr60, SM490B, St52-3, S275JR, S355JR, CortenB, SM520, SM570, 15MnV, 16Mn, NR400ZL, S275 (J0, J2, NL), S355 (J0, J2, K2, NL),SM490 (A, B, C),SM490Y (A...)

Thursday 16 May 2013

Cantidad : 1 - Precio : 1,00 €

.Portable Asphalt Batch Plant for Sale, Burner is available for coal and oil, at client's option. The following main conclusions can be drawn: 1. From the comparison of strength and water stability at different gradation modes, the self-designed gradation is the best, and the optimum...

Thursday 16 May 2013

Cantidad : 1 - Precio : 1,00 €

Dayu Asphalt Plant Attended the Exhibition Bauma China 2012 Successfully The use of hot-mix asphalt patch on the road, there are many restrictions. From 20-30 years of the last century, road maintenance workers looking for a new asphalt mixture to compensate for these limitations...

Thursday 16 May 2013

Cantidad : 1 - Precio : 1,00 €

.SLB Mobile Asphalt Mixing Plant, Integrated design of drying and mixing in drum, reduce initiate cost for clients Cold mix asphalt, a new bind of pavement repair material, can be in room temperature or low temperature on the pavement to be repaired. But now, the strength and water...