Varios / Descuento - Los buzos Liquidación

Jueves 25 abril 2024

Precio : 100USD

1. Adopt plug-in structure, with the number of input channels and output channels optional. 2. With optional HDMI, DVI, VGA, SDI and other interfaces, support full seamless output. 3. When the HDMI signal is output, it supports a variety of common resolutions such as 800*600~4K@30Hz...

Jueves 25 abril 2024

Precio : 100USD

4-in 4-out Digital Audio Matrix Processor Distributed system with Dante LAN digital audio transmission technique; No suppression, no dissipation and no delay, 48 kHz audio sampling; Dual network interface design: 1): The local analog signal can be converted into a network signal...

Jueves 25 abril 2024

Precio : 100USD

The MX Series is the latest design stereo professional amplifier speaker system with low distortion and high efficiency. With reliable protection of overvoltage, under-voltage, DC, short circuit and alarming function conference. BTL connection is available. The professional digital...

Jueves 25 abril 2024

Precio : 100USD

DSP4300 With streamlined design, beautiful appearance; ABS plastic mixed with glass fiber chassis, strong and durable; The round wave-guide hole in front and the damping port at back form a unique low-frequency heart-shaped diffusion, ensuring pleasant, natural treble and full, clear bass...

Miércoles 24 abril 2024

Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing them to withstand higher pressures than Class 150 valves. They are commonly used in industries such as oil and gas, petrochemical, power generation, and refining. Class 300 valves come...

Miércoles 24 abril 2024

Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating Temperature...

Miércoles 24 abril 2024

Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class 2500 ball...

Miércoles 24 abril 2024

globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal operating...

Miércoles 24 abril 2024

A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? globe valve...

Miércoles 24 abril 2024

Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal operating conditions...

Miércoles 24 abril 2024

Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check valve 8 is composed of a valve cover and a valve body, and there is a valve in the valve body, and the liquid flow is controlled by the...

Miércoles 24 abril 2024

Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, and...

Sábado 20 abril 2024

Precio : 50USD-5000USD

Rubber Buoys At our company, we specialize in offering the highest quality rubber buoys for marine industry applications. Our buoys are crafted from the finest materials, and are designed to provide years of reliable service in all kinds of marine conditions. We offer a wide selection...

Sábado 20 abril 2024

Precio : 50USD-5000USD

Rubber Boat Flooring When it comes to flooring on a boat, marine rubber boat flooring is the way to go. Rubber boat flooring is a great choice for boats because it is strong, durable, and provides a non-slip surface that is perfect for wet and dry conditions. It is also waterproof...

Sábado 20 abril 2024

Precio : 50USD-5000USD

Mooring Bollards Mooring marine bollards provide a secure and reliable way to anchor boats and other vessels, ensuring they remain safely in place. They are an essential part of any marina or dock, providing a secure point to which a rope or chain can be attached. Marine mooring bollards...

Sábado 20 abril 2024

Precio : 50USD-5000USD

Boat dock rubber fenders are protective devices made of rubber or a similar material that are designed to guard boats from impact with docks, other vessels, and other obstacles. They are designed to absorb the impact of a boat bumping against a dock or another vessel, thus protecting...

Sábado 20 abril 2024

Precio : 50USD-5000USD

A port fender, also known as a starboard fender, is a type of rubber fender specifically designed for use on the port (left) side of a boat when docking or mooring. These fenders are typically designed to be wider and more curved than standard fenders, which allows them to provide...

Sábado 20 abril 2024

Precio : 50USD-5000USD

Marine Rubber Fender PingAn Rubber, one of leading marine fender manufacturers, we offer types of marine fenders, including inflatable, large, jetty rubber fender, and cell fender. Ensure optimal vessel protection and docking safety with our reliable marine rubber fender solutions...

Sábado 20 abril 2024

Cantidad : 1000 - Precio : 0,50 €

Estas botellas están fabricadas con plástico HDPE de calidad alimentaria, que incluye diversas capacidades y especificaciones. Además, puede personalizar los colores y el diseño del logotipo de las etiquetas. Si no hay un envase adecuado, también podemos personalizar el molde. Son versátiles...

Viernes 19 abril 2024

Cantidad : customized - Precio : USD0.1-15

We are an unparalleled name in offering a wide gamut of precision wire cutting parts. These wire cutting parts are amongst the most desirable and reliable products in the industry. The offered spare parts are manufactured using the best grade raw material under the supervision of...

Viernes 19 abril 2024

Cantidad : customized - Precio : USD0.1-15

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Viernes 19 abril 2024

Cantidad : customized - Precio : USD0.1-15

A thread is a continuous helical ridge formed on the inside (nut) or outside (screw) of a cylinder. This ridge is called the crest. Between each crest is a space, called the root. Threads are set at an angle to the axis of the bolt or nut. We provide quality threaded parts. DESCRIPTION...

Viernes 19 abril 2024

Cantidad : customized - Precio : USD0.1-15

We provide DIN(Deutsche Industrie Normen) standard mould parts of high quality to our customers. The mold standard parts are applied to all kinds of mold base and mold holders. As a professional precision mold supplier, we will provide good services to satisfy different requirements...

Viernes 19 abril 2024

Cantidad : customized - Precio : USD0.1-15

Stamping — also called pressing — involves placing flat sheet metal, in either coil or blank form, into a stamping press. In the press of stamping components making, a tool and die surface form the metal into the desired shape. Punching, blanking, bending, coining, embossing, and...

Viernes 19 abril 2024

Cantidad : customized - Precio : USD0.1-15

When it comes to custom injection molding, precise moulds and precision equipment are required for precision molding or PIM. Among the topics covered in this blog are general ideas, specific traits and qualities, as well as specific options for plastic materials, precision moulds...

Viernes 19 abril 2024

Cantidad : customized - Precio : USD0.1-15

Our plastic injection moulding process produces custom - rapid prototypes and end-use production parts in 15 days or less. We use aluminium moulds that offer cost-efficient tooling and accelerated manufacturing cycles, and stock more than 100 different thermoplastic resins. As a precision...

Miércoles 17 abril 2024

Since LED lights appeared on the marketing, LED grow lights are becoming popular day by day. As a grower, it's the wise choice to use commercial led grow lights. LED grow light help shorten the life cycles of plants, directly increase the income of the grower. LED grow light is also...

Miércoles 17 abril 2024

Cantidad : 2000 units - Precio : $2000-6000

4 WHEEL ELECTRIC MOBILITY SCOOTER With four wheel design, this four wheel drive electric scooters 's center of gravity is stable and turning will not roll over. When in turning, the mobility scooter electric 4 wheel's whole plane rotates to ensure smoothness and safety. The four-wheel...

Miércoles 17 abril 2024

Cantidad : 2000 units - Precio : $2000-6000

HEAVY DUTY LARGE SIZE MOBILITY SCOOTER As an attractive high-speed, long-range scooter, Etong three wheel electric mobility scooter offer top performance, easy disassembly and full versatility. Easy to carry, easy to fold, 3 wheel electric mobility scooter can be loaded into the trunk...

Miércoles 17 abril 2024

Cantidad : 2000 units - Precio : $2000-6000

Meet Our ETONG Golf Cart ETONG golf cart whlosale are environmentally friendly passenger vehicles designed and developed for golf courses, resorts, villas, garden-style hotels, tourist attractions, airports, and more. Types of Golf Cart Wholesale ETONG has a large range of electric...