B2B Servicios

Friday 27 May 2022

Cantidad : 1-200 Ton

Anti-pollution Flashover Coating (RTV) High Voltage Insulator Coatings (HVIC) To prevent the electrical equipment from pollution flashover in humid climate; Free of surface maintenance and cleaning after coated. Features of RTV High Voltage Insulator Coating: 1. Excellent hydrophobicity...

Friday 27 May 2022

Cantidad : 1-200 Ton

We offer different kinds of pin type and medium voltage insulators for distribution system. Contact us get more details about pin type and medium voltage insulator, such as TDS, Application Method, OEM etc. We can supply different type of pin type insulator and medium voltage insulator...

Friday 27 May 2022

Cantidad : 1-200 Ton

Multifunctional Insulator Cleaning Agent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, especially clean that which surface was heavily polluted. After cleaning, RS-10 can significantly enhance the adhesion between the RTV coating...

Friday 27 May 2022

Cantidad : 1-200 Ton

Silicone Rubber Shield for Porcelain Insulators can used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap and pin type suspension insulator) from bird damage, lightning attack, etc. Features of High Voltage Booster Shed 1. Shed booster can...

Friday 27 May 2022

Cantidad : 1-200 Ton

The Self-Fusing Silicone Rubber Insulation Tape is a new insulation material, avoid bare conductors short circuit or tripping because of the wild animal or human contact it. Prior to use, simply tear the isolation layer, and then stretched under moderate shiplap wrapped on the Busbar...

Friday 27 May 2022

30-port Gigabit/10Gigabit Layer 3 Managed Industrial Ethernet Switch Support 6 10Gigabit fiber ports (SFP slots), 8 Gigabit Combo (SFP slots or RJ45), 16 Gigabit SFP slots Adopt SW-Ring patented technology, support single ring, coupling ring, chain, Dual-homing, automatic recovery...

Friday 27 May 2022

Precio : 100USD

Smart Firefighting Platform Created to meet the requirements of firefighting departments at all levels, including automated fire prevention and control, regulated law enforcement, etc. Smart Building Platform Created to provide full-lifecycle management of cities, parks and buildings...

Friday 27 May 2022

Precio : 100USD

Smart Community Platform Mainly used by the Command Platform of smart communities to enable scenario sensing, city management, security alerts and IoT device management capabilities, so as to make service management and decision-making smarter. Scenario sensing Access management Real-time...

Friday 27 May 2022

Precio : 100USD

Flexible combinations of multiple editions: Lite, Flex and Fusion Industry-leading 240-FPS structured processing Supporting the latest video encoding standards; 8-channel 1080p H264/H265 video max Certified by the Third Research Institute of the MPS 20K-entry library Terminus Group...

Friday 27 May 2022

Precio : 100USD

Swappable flexible computing units Al-enabled computing capacity deployment for higher performance at lower costs Industry-leading performance upgrading (4 times higher in every 9 months) VPU upgrade from USB single-channel Myriad 2 to mPCle double-channel Myriad X Terminus Group...

Thursday 26 May 2022

Airless Jars Cosmetic The vacuum jar is an innovative custom jars and bottles in recent years. It is mainly used in day creams, night creams, sun creams, BB creams, eye creams, creams, and skin care products with specific effects - for example, anti-wrinkle essence whitening emulsion, and so on...

Thursday 26 May 2022

Airless Bottle is a popular cosmetic packaging container in recent years, mainly used in day cream, night cream, sunscreen, toner, BB cream, eye cream, protector, and skin care products with specific effects, such as anti-wrinkle essence, whitening emulsion, and so on. Products Description...

Thursday 26 May 2022

Cosmetic Packaging Empty cosmetic packaging refers to packaging materials used to pack cosmetic contents. According to the material, it can be divided into 5 categories: plastic, glass, metal, paper and wood products. The production process of plastic products includes injection molding...

Thursday 26 May 2022

Lip gloss case is very similar with Mascara case. It's combined by cap, rod, wiper, bottle and applicator. Products Description Cap normally is made by plastic (injection) or aluminum (punching). Rod normally made by POM or PP. But POM will have low formaldehyde precipitation, PBT...

Thursday 26 May 2022

Ordinary compact power jar: A compact power jar usually consists of cap, base, back button + pin, powder plate, and front click botton. Products Description Dual-purpose compact cosmetic powder container: This powder jar separates powder and powder puff, that is, the puff is prevented...

Thursday 26 May 2022

CRYSCORE can offer Epi-Ready grade sapphire wafer with a very low surface roughness in complete orientation options. C plane sapphire wafers are being extensively used for epitaxial growth of III-V and II-VI compounds, such as gallium nitride (GaN), aluminum nitride (AlN), for bright...

Thursday 26 May 2022

Sapphire has a wide transmission range, spanning the three wavelength bands of ultraviolet, visible light and infrared and has high thermal shock resistance, high hardness and wear resistance. Almost no substance except the diamond can produce scratches on its surface, and its chemical...

Thursday 26 May 2022

R plane sapphire wafers are preferred for the hetero-epitaxial deposition of silicon used in microelectronic IC applications. R plane is the non-polar plane of sapphire. So the different positions of R-plane in sapphire devices, the mechanical, thermal, electrical and optical properties...

Thursday 26 May 2022

Cantidad : 67 palette - Precio : Faire Offre

Disponible en stock Lote de piezas de recambio para automóviles nuevos de Fiat y Opel ( OE ) 90 % de las piezas para vehículos nuevos Filtros, Freno, Velas, Sensor, Carrocería, Accesorios, Alfombras, Llantas, Retrovisor, ... Opel: 25 palets Fiat: 42 palets Valor de compra del fabricante: 620...

Wednesday 25 May 2022

Features of Cassava Grinding Machine Processing Capacity: 3-6Tons/hour Application Scope: Grating the cassava into the slurry. Product Introduction: Cassava grater machine, cassava grating machine, cassava grinder, cassava grinding machine for cassava flour and Garri processing. 1...

Wednesday 25 May 2022

Features of Cassava Flour Milling Machine Processing Capacity: 400-500kgs/hour Application Scope: Milling the coarse powder into fine powder Product Introduction: Cassava milling equipment, cassava flour mill cassava flour and garri processing Product Description of Cassava Milling Machine 1...

Wednesday 25 May 2022

TP300 cable probe system mainly used in various specifications of CNC grinding machines, CNC lathes and specially measuring devices. TP300 cable probe system includes a TP300 trigger probe unit, HPI-A16 (axial outlet) or HPI-R16 (radial outlet) probe shank containing the probe's interface...

Wednesday 25 May 2022

Pioneer touch probes for CNC machines can measure and find the base position of the workpiece quickly and accurately, set or modify the workpiece coordinate automatically. The CNC machine touch probe system is an effective solution for improving the accuracy of your workpieces and...

Wednesday 25 May 2022

Tool setter for CNC machining centers is an important operation procedure in CNC machining, and its accuracy will directly affect the processing precision of spare parts and efficiency. Pioneer CNC machine tool setters are used for fast and automatic tool setting and tool breakage detection...

Wednesday 25 May 2022

RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software. The RPDM is a radio frequency probe designed to be turret mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece...

Wednesday 25 May 2022

RPS-20M wireless cnc probe system contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe with radio signal transmission which offers automated part set-up and in-cycle gauging on machining centers, including 5-axis machines...

Wednesday 25 May 2022

The radio communication probe system is suitable for various complex working conditions in the processing of CNC machine tools, mainly suitable for large-scale machine tools, multi-axis machine tools and other CNC equipment, to avoid the influence of signal transmission strength by...

Wednesday 25 May 2022

As an important component of the probe measurement system, the probe stylus/sensor is mainly composed of three parts: the stylus ball, the stylus rod, and the stylus handle. A stylus is the part of the measuring system which makes contact with the component, causing the probe's mechanism...

Wednesday 25 May 2022

Conventional Lathe is perfectly suitable for small volume production plant and machinery maintenance shops and can machine a wide range of materials. Features of Conventional lathe machine High Rigidity Structure The machine is a one-piece casting because the bed is cast as a whole...

Wednesday 25 May 2022

Features of Conventional Double ColumConventional Double Column Vertical Lathe, Regarding the column heightening model, there is a double sliding column system. The cross beam can move up and down to achieve better cutting accuracy. We have several models to be selected for the...