120KN - 30 Anuncios

Sábado 16 noviembre 2024

Cantidad : 1000 - Precio : contact us

YRT200 Rotary Table Bearing Product Model: YRT200 d: 200mm D: 300mm H: 45mm axial dynamic load: 120kn axial static load: 765kn radial dynamic load: 81.5kn radial static load: 220kn YRT200 features: 1.High precision: precision at P4, P2. 2.High rigidity: YRT series bearings...

Martes 04 junio 2024

Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise boring equipment, called...

Jueves 04 abril 2024

Eye nuts are internally threaded fasteners that are frequently used in the lifting and rigging industry to lift and secure cables, wires, and chains. Steel that has been forged, zinc-plated, stainless steel, or hot-dipped galvanized are the materials used to make eye nuts. To suit...

Jueves 04 abril 2024

Bulk eye bolts are specially designed fasteners that are mainly used in situations where tensile forces and heavy loads are required. It is usually installed at the top center or symmetrical position of the part for lifting operations, and can be arranged on both sides of the part...

Viernes 12 enero 2024

Random Roller Cutter Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise...

Miércoles 01 noviembre 2023

Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise boring equipment,...

Viernes 13 enero 2023

Application Field: Photovoltaic Power Generation Gear Ratio: 62: 1 Output Torque: 6.5KN.m Tilting Moment Torque: 33.9KN.m Holding Torque: 32.5KN.m Static Axial Rating: 338KN Static Radial Rating: 120KN Dynamic Axial Rating: 81KN Dynamic Radial Rating: 81KN Precision: ≤0.2° Weight...

Viernes 13 enero 2023

Precio : 1000-6000USD

Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise boring equipment, called...

Jueves 15 septiembre 2022

Precio : 1000-6000USD

Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise boring equipment, called...

Sábado 02 julio 2022

Slew Drive for Solar Tracking System Application Field: Photovoltaic Power Generation Gear Ratio: 62: 1 Output Torque: 6.5KN.m Tilting Moment Torque: 33.9KN.m Holding Torque: 32.5KN.m Static Axial Rating: 338KN Static Radial Rating: 120KN Dynamic Axial Rating: 81KN Dynamic Radial Rating...

Viernes 01 noviembre 2019

Application Field: Photovoltaic Power Generation Gear Ratio: 62: 1 Output Torque: 6.5KN.m Tilting Moment Torque: 33.9KN.m Holding Torque: 32.5KN.m Static Axial Rating: 338KN Static Radial Rating: 120KN Dynamic Axial Rating: 81KN Dynamic Radial Rating: 81KN Precision: ≤0...

Jueves 27 abril 2017

Cantidad : 1000pcs - Precio : contact us

VE9A slewing drive for solar tracking Brand Name: FRB Model Number: VE9A-61-25R Type: slewing drive for solor power Output torque: 6.5kNm Tilting moment torque: 12kN.m Holding torque: 12kN.m Static Axial rating: 12kN Static radial rating: 338kN Dynamic axial rating: 120kN Dynamic radial rating...

Jueves 27 abril 2017

Cantidad : 1000pcs - Precio : contact us

VE6 Slewing bearing for solar parabolic trough Brand Name: FRB Model Number: VE6-30-R Specification: Normal Application: Industrial Output torque: 2000 N.m Tilting moment torque: 9KN,m Holding torque: 10000 N.m Static Axial rating: 60KN Static radial rating: 120KN Dynamic axial rating: 14...

Sábado 04 marzo 2017

Cantidad : 1000 - Precio : contact us

YRT100 Rotary Table Bearing Product Model: YRT 100 d: 100mm D: 185mm H: 38mm axial dynamic load: 76.5kn axial static load: 415kn radial dynamic load: 47.5kn radial static load: 120kn YRT100 bearing can be used to the machine tool and other high precision machinery of the...

Martes 28 febrero 2017

GEARENCH C122-P PETOL SPECIAL CHAIN W GEARENCH C142-54-P PETOL SPECIAL CHAIN-EXTRA PMZ Technology info,pmztechnology,com GEARENCH C37-P TITAN REVERSIBLE CHAIN TONG FOR PIPE SIZE 3/4"-4" LENGTH 37" GEARENCH C47-P TITAN REVERSIBLE CHAIN TONG FOR PIPE SIZE 1"-6" LENGTH 47: " GEARENCH...

Martes 13 septiembre 2016

Precio : 200 usd

Model: BZ-65C BZ-85C BZ-105C Cutting range: dia 65mm dia 85mm dia 105mm Rated output: 60KN 60KN 120KN Rated pressure: 63Mpa 63Mpa 66Mpa Cutting cycle: 3-8s(BZ-65C,BZ-85C)(depend on size of cable ) 5-15s(BZ-105C) (depend on size of cable) Max.pressure: 70Mpa Cable: Cu/Al cable...

Martes 13 septiembre 2016

Precio : 200 usd

CPC-65C/85C/105C/120C Hydraulic Wire Cable Cutting Head 1.Opening C type cutting head 2.Hydraulic quick couper connect with the pump for working 3.Guide pad design avoid the blade dislocation during cutting procession Model: CPC-65C CPC-85C CPC-105C CPC-120C Cutting range: dia...

Martes 13 septiembre 2016

Precio : 200 usd

CPC-65C/85C/105C/120C Hydraulic Wire Cable Cutting Head 1.Opening C type cutting head 2.Hydraulic quick couper connect with the pump for working 3.Guide pad design avoid the blade dislocation during cutting procession Model: CPC-65C CPC-85C CPC-105C CPC-120C Cutting range: dia...

Martes 13 septiembre 2016

Precio : 200 usd

HZ-65C/85C/105C armoured Cu/Alu cable cutter 1.Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C Cutting range...

Martes 13 septiembre 2016

Precio : 200 usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1.Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C ...

Martes 13 septiembre 2016

Precio : 200 usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1.Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C ...

Martes 13 septiembre 2016

Precio : 200 usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1.Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C ...

Sábado 20 agosto 2016

Precio : 100usd

Cutting range: dia 65mm dia 85mm dia 105mm Rated output: 60KN 60KN 120KN Rated pressure: 63Mpa 63Mpa 66Mpa Cutting cycle: 3-8s(BZ-65C,BZ-85C)(depend on size of cable ) 5-15s(BZ-105C) (depend on size of cable) Max.pressure: 70Mpa Cable: Cu/Al cable,armoured Cu/Al cable Battery: DC 18V 3...

Sábado 20 agosto 2016

Precio : 100usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1. Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C...

Sábado 20 agosto 2016

Precio : 100usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1. Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C...

Sábado 20 agosto 2016

Precio : 100usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1. Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C...

Sábado 20 agosto 2016

Precio : 100usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1. Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C...

Sábado 20 agosto 2016

Precio : 100usd

FEATURES HZ-65C/85C/105C armoured Cu/Alu cable cutter 1. Simple and convenient-opening C type cutting head 2.Double hydraulic stages alternately ensure the piston move fast 3.Guide pad design avoid the blade dislocation during cutting procession Model: HZ-65C HZ-85C HZ-105C...

Jueves 20 diciembre 2012

Cantidad : 200set/mon - Precio : 3600USD

Φ120/140 Hydraulic anchor windlass Chain Dia.: 120/140mm Working load: 612/833KN Supporting load: 4100/5582KN Ubicación : Zhuhai City, 519060 Zhuhai, Persona a contactar : Robin Shen, 86 0756 6302052

Viernes 11 septiembre 2009

CTE-412 SPECIFICATION: - Output force: 120kN - Ram Stroke: 30mm - Hexagonal crimping: Cu16-400mm² - Al16-300mm² - Rate Pressure: 68.8Mpa or 10,000 Psi SIZE 610(L)x150 (W) mm WEIGHT 6.2 kg ACCESSORIES - Plastic carry case - Standard Dies: 16/25/35/50/70/95/120/150/185/240/ 300/400...