ANNULAR - 113 Anuncios

Miércoles 05 junio 2024

RFJW03 Water Jet Looms RFJW03 series water jet loom is suitable for weaving light and medium-thickness fabrics. Drawing on Rifa's experience in development of other water jet looms, the design is optimized, the weaving speed and quality of the loom are improved. The loom has varied...

Martes 04 junio 2024

Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise boring equipment, called...

Viernes 31 mayo 2024

Rubber seal is one of the common base components in sealing device, and plays an important role in the leaking and sealing. It is composed of one or a few parts of the annular cover, fixed to the bearing ring or washer and contact with another ring or washer or form a labyrinth...

Viernes 10 mayo 2024

RFJW03 Water Jet Looms RFJW03 series water jet loom is suitable for weaving light and medium-thickness fabrics. Drawing on Rifa's experience in development of other water jet looms, the design is optimized, the weaving speed and quality of the loom are improved. The loom has varied...

Viernes 12 abril 2024

BRIEF INTRODUCTION OF SUCTION CUPS IN AUTOMOTIVE INDUSTRY AIRBEST suction cups for car industry are suitable for handling metal sheet. Get Suction Cups In Automotive Industry Price SUCTION CUPS IN AUTOMOTIVE INDUSTRY SERIES STC Series 1.5 Bellows Suction Cup Special for Metal Sheet...

Miércoles 03 abril 2024

Precio : 100-60000RMB

Kerf rock roller bits is a kind of TCI roller cutter widely used in raise boring equipment. The cutter surface has multiple annular grooves (chipways), and the carbides are orderly distributed on the cutter body surface outside the chipways. This roller cutter is the most commonly...

Jueves 18 enero 2024

Cantidad : 2000pcs pe

Power supply surge protection device, also known as the lightning protector, is suitable for AC 50/60HZ, rated voltage 220V/380V power supply system, to protect indirect lightning and direct lightning effects or other transient over voltage surges, suitable for households The requirements...

Viernes 12 enero 2024

Random Roller Cutter Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise...

Martes 09 enero 2024

Precio : 100000-500000

After the rapid development of the wind energy market in recent years, the wind energy resources in the plain area with good construction conditions have almost been developed. At present, wind turbine heavy haul transport carriers are being transported to the mountainous area and...

Viernes 29 diciembre 2023

Needle roller bearings use needle rollers as their rolling elements rather than balls. The term "needle roller" usually means that its length is several times its diameter. small needle roller bearings have a smaller cross-sectional height and could keep the entire machine lighter...

Miércoles 01 noviembre 2023

Random Roller Cutter is a kind of TCI roller cutter without annular grooves (chipways) on the cutter surface, and its carbides are randomly distributed on the cutter body surface according to the design. This kind of roller cutter can be used not only in raise boring equipment,...

Lunes 09 octubre 2023

Cantidad : 10 hq cont

Disposable Plastic Cutlery Set Eco-friendly reusable forks and spoons set is the earth-friendly alternative to single-use plastic cutlery. Lesui tough and sturdy paper disposable cutlery allows you to enjoy your salad or indulge in a piece of steak without any hassle. Perfect for wedding party...

Viernes 29 septiembre 2023

Precio : 100USD

CNC boring is used for the shaft sleeve in the transmission shaft of large equipment, and the tolerance of the bearing position is +0.03mm. After welding the accessories, use CNC horizontal boring and milling equipment to process both sides with a concentricity of 0.05mm. CNC Boring...

Miércoles 06 septiembre 2023

Casing head is a kind of new product which is designed according to customers' requirements and applied in all deep wells and completion operation. lt is mainly used to fix wellhead connect casing string and seal, and control the pressure of casing annular space. The casing head assembly...

Miércoles 30 agosto 2023

Ring Shaped Samarium Cobalt (SmCo) Magnets Samarium cobalt is the second strongest magnetic material after neodymium-iron-boron. Although its magnetism is not as strong as neodymium magnet, they are more corrosion-resistant and have a higher maximum working temperature.Ring shaped...

Miércoles 02 agosto 2023

Precio : 100000-500000USD

After the rapid development of the wind energy market in recent years, the wind energy resources in plain areas with good construction conditions have almost been developed. At present, wind turbine heavy haul transport carriers are being transported to the mountainous area and sea...

Miércoles 02 agosto 2023

A solenoid operated diaphragm valve is one of the crucial control units of any fluid control system to control the media of liquid or gas. When the power is on or off, the media (liquid or gas) can pass through the valve or not, to achieve the purpose of shutting off or allowing fluid flow...

Jueves 29 junio 2023

Ring Shaped Samarium Cobalt (SmCo) Magnets Samarium cobalt is the second strongest magnetic material after neodymium-iron-boron. Although its magnetism is not as strong as neodymium magnet, they are more corrosion-resistant and have a higher maximum working temperature.Ring shaped...

Martes 27 junio 2023

Precio : $5-$200000

Wellhead and Christmas tree is used for well drilling and oil or gas production, water injection and downhole operation. wellhead and christmas tree is installed on the top of a well to seal the annular space between casing and tubing, can control wellhead pressure and adjust well...

Martes 13 junio 2023

Cantidad : 150 verti - Precio : US$30,000--US$2 mill

The maximal rotation of spindle can reach 2500rpm/min It can meet the large-torque requirement during the rough machiningand the high rotational speed during the fine machining As a CNC milling supplier and CNC milling factory, DEED provides high-performance CNC gantry milling machine for sale...

Viernes 19 mayo 2023

With integral cage design technology, inner annular space had been increased, and in this way, the possibility of corrosion for valve core shall be reduced and maximum flow control shall be provided. Valve body and valve bonnet are sealed with metal and valve stem is sealed in assistance...

Viernes 12 mayo 2023

Precio : 100USD

Kerf roller cutter is a kind of TCI roller cutter widely used in raise boring equipment. The cutter surface has multiple annular grooves (chipways), and the carbides are orderly distributed on the cutter body surface outside the chipways. This roller cutter is the most commonly used...

Jueves 11 mayo 2023

The FBG Anchor Dynamometer AD-01 is made of constant elastic, high-strength, and corrosion-resistant materials. Two FBG strain gauges are installed on the annular elastic base to accurately measure the total amount of various load from bearing cables, anchors and bolts. The product...

Sábado 29 abril 2023

Cantidad : 0 PCS-1000 - Precio : 1 USD/set ~ 300 USD/

PCB Capability GreensTone has successfully served customers with PCB manufacturing service in communication, industial devices, new engrgy, power supply, sensors, smart home applications control, smart industial control , medical devices and security control device and so on. GreensTone...

Viernes 28 abril 2023

Cantidad : 300, 000 L - Precio : USD $1-20

Product Introduction Thiodiazole copper 20 % SC. Product Feature CALIBUR® is a National Invention Patent product with independent intellectual property right and exclusively manufacturing. CALIBUR® has been registered for 17 diseases on 14 crops This product is a highly effective...

Miércoles 29 marzo 2023

Cantidad : 500000tons - Precio : $5-$200000

The tie-back assembly is a special cementing tool for tieback operation. Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers variety...

Miércoles 29 marzo 2023

Cantidad : 500000tons - Precio : $5-$200000

The casing spool assembly comprises shell and pack off bushing and is used to seal the annular clearance between polished nipple and liner hanger body so as to build pressure after the ball reaches the landing collar, preventing current from passing through upward. There are sinistral-threads...

Miércoles 15 marzo 2023

GZPTS-D series high-speed double-slides tablet press machine adopts advanced modular design concept, simple structure, and easy maintenance. The servo motor is used for the main pressure and filling. The tablet manufacturing machine has fast reaction speed and high adjust accuracy...

Sábado 04 marzo 2023

Precio : US$1.00

Auto fuel injector, is a part that injects fuel into the engine cylinder. It also is a simple solenoid valve. When the solenoid coil is energized, the suction force is generated, the needle valve is sucked up, the nozzle hole is opened, and the fuel is ejected at a high speed through...

Miércoles 22 febrero 2023

The basic types of mechanical seals for pumps are classified as single mechanical seals, double mechanical seals and series mechanical seals. The single end face mechanical seal consists of a pair of sealing ends; The double mechanical seal centrifugal pump consists of two sealing ends...