FOLLOWING - 80 Anuncios

Viernes 15 noviembre 2024

Cantidad : 30 - Precio : 328 USD

La auditoria de fábrica comprueba el desempeño y la capacidad del fabricante en términos de cumplimiento con las condiciones legales del contracto como capacidades técnicas, instalaciones, maquinaria, materia prima y otras utilizadas, embalajes, métodos de control de calidad, cantidad...

Jueves 14 noviembre 2024

If you need DAEWOO turbocharger, please contact us as followings: E-mail: turbochargers(at)attachment8(dot)com Web sites: www(dot)as-turbochargers(dot)com SkypeID: jasminecsysy Search "as-turbochargers" to find us. All types of DAEWOO turbocharger we could provide: ...

Jueves 14 noviembre 2024

The geophone element, ZF-10, is compatible to SG-10 of Sercel Harmonic distortionic: 0.075% Typical spurious frequency: 240Hz Reliable with 3 years warranty We also provide geophone elements as followings: ZF-24HP 10Hz, Compatible to SM-24 of ION; ZF-32 10Hz, Compatible to GS-32CT of Geospace...

Viernes 31 mayo 2024

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Sábado 25 mayo 2024

Cantidad : 1000 tons/ - Precio : RMB 10000~90000/ton

Clad head is a boiler component part of the pressure vessel, which is usually fixed on the two ends of the pressure vessel. It is also a sealing product welded on the pipe end. The welded head can't be knocked-down. The 2 1 semi elliptical tank heads is the end cover on the pressure vessel...

Martes 21 mayo 2024

Cantidad : 50000sets/ - Precio : 10-500USD/SET

Tapered roller bearing, which is produced by VXO cam roller bearings, a tapered roller bearing supplier, have tapered inner and outer ring raceways and are configured with tapered rolling elements. This design can withstand the simultaneous action of combined axial and radial loads...

Sábado 30 marzo 2024

Packson - Expert in 2K｜Multi-shot Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products...

Jueves 08 febrero 2024

Cantidad : 20000 roll - Precio : 0.01~1 USD

Custom KT tape with elasticity 170%-200%, good tensile strength. Strong and reliable sticky with high adhesion Soft, comfortable and skin are breathable with cotton material. Hypoallergenic adhesive leaves no residue on body parts. Elastic cotton substrate. The custom kinesiology...

Sábado 20 enero 2024

Anpeng woven wire mesh with slotted openings could be woven in any slot length and with any number of wires in clusters. This type of opening provides greater open area, in addition to higher production compare to regular square mesh. Designed to screen scalp flat, elongated particles...

Viernes 01 diciembre 2023

Cantidad : 20000 roll - Precio : 0.01~1 USD

Custom Kinesiology Tape Custom KT tape with elasticity 170%-200%, good tensile strength. Strong and reliable sticky with high adhesion Soft, comfortable and skin are breathable with cotton material. Hypoallergenic adhesive leaves no residue on body parts. Elastic cotton substrate...

Miércoles 29 noviembre 2023

Queridos, Somos una empresa comercial de subcontratación egipcia, nuestro número DUNS es 84-921-0303 y nos dedicamos al campo de fertilizantes, pesticidas y productos químicos agrícolas, principalmente en los siguientes; - Urea N46 Granular - Ácido fosfórico 52% - Fosfato diamónico...

Miércoles 29 noviembre 2023

Self-aligning ball bearings have two rows of balls and two continuous tracks of deep groove ball type in the inner ring. The outer ring has a spherical track with the center of curvature coinciding with the center of curvature of the bearing. This gives the inner ring, the balls,...

Jueves 26 octubre 2023

Benefits of Explosion Bonded Clad Plate a. The Explosion Bonded Clad Plate is the metal clad plate produced by the explosive bonding method. It owns core advanced benefits as followings: The Explosion Bonded Clad Plate does not change the chemical compositions and physical states...

Jueves 26 octubre 2023

Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products. As a leading expert in this technology...

Jueves 07 septiembre 2023

Cast iron filter is an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of pressure reducing valve, pressure relief valve, positioning valve or other equipment to eliminate impurities in the medium and protect the normal operation...

Jueves 24 agosto 2023

Tapered roller bearing, which is produced by VXO cam roller bearings, a tapered roller bearing supplier, have tapered inner and outer ring raceways and are configured with tapered rolling elements. This design can withstand the simultaneous action of combined axial and radial loads...

Sábado 29 julio 2023

Overmolding mold is made of molding over molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can be used to...

Jueves 25 mayo 2023

Precio : 100USD

2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years...

Martes 18 abril 2023

2k plastic injection moulding is one type of injection mold. 2k two color molding is also named as two shot molding, double shot mold, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors...

Jueves 23 febrero 2023

Cantidad : 20000 roll - Precio : 0.01~1 USD

Custom KT tape with elasticity 170%-200%, good tensile strength. Strong and reliable sticky with high adhesion Soft, comfortable and skin are breathable with cotton material. Hypoallergenic adhesive leaves no residue on body parts. Elastic cotton substrate. The custom kinesiology...

Jueves 16 febrero 2023

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability 2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material,...

Lunes 16 enero 2023

This full body bulletproof suit is the upgraded version of the basic outer vest. Such full bulletproof suit provides full NIJ ballistic threat level 3A coverage. Bulletproof full body suit features a removable outer carrier and level 3A ballistic panel inserts (front and back ballistic...)

Viernes 09 diciembre 2022

2K Plastic Injection Moulding  ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability 2 component injection molding is one type of injection mold. 2k molding is also named as two colour injection moulding ...

Jueves 27 octubre 2022

2k injection molding process is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k plastic injection moulding consists of two different plastic materials and colors. With...

Viernes 26 agosto 2022

Precio : 100USD

Self-aligning ball bearings have two rows of balls and two continuous tracks of deep groove ball type in the inner ring. The outer ring has a spherical track with the center of curvature coinciding with the center of curvature of the bearing. This gives the inner ring, the balls,...

Martes 09 agosto 2022

Cantidad : 200 tons/w

Anpeng Slotted Screen Mesh Anpeng woven wire mesh with slotted openings could be woven in any slot length and with any number of wires in clusters. This type of opening provides greater open area, in addition to higher production compare to regular square mesh. Designed to screen scalp flat...

Martes 02 agosto 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Martes 02 agosto 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Domingo 10 julio 2022

Cantidad : 1 ton - Precio : 800,00 €

We are professional manufacturer of filler masterbatch in China. Our masterbatch can be added in many mediums, such as film, bag, sheet, pipe, injection molding,etc Followings are our ranges of products - Transparent Filler Masterbatch - Barium Sulfate Filler Masterbatch - Sodium...

Sábado 18 junio 2022

They can only carry axial loads and cannot carry any radial loads. The shaft rings, seat rings and ball cages are separable and interchangeable. Bearings with spherical washers could prevent misalignment during installation. The followings are the typical thrust ball bearing types...