260℃ - 1449 Anuncios

China 201713 B2B Servicios
Hot Melt Cloth/Duct Tape

Viernes 05 enero 2024

Feature: Gauze fiber and PE particles as the base material. Coated with synthetic rubber, good adhesion, high peel. Application: Widely used in book packaging, packaging can not be warped. Specification of Hot Melt Cloth/fabric duct tape Product Adhesive Total Thickness Initial...

Shanghai Yongguan Adhesive Products Corp. Ltd

  • 201713 - ygtape
  • 021 59835246
China 215215 Artesania
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics

Viernes 05 enero 2024

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 Ropa
PA6 GF30 Halogenated FR (A1014F) for Engineering Plastics

Viernes 05 enero 2024

PA6 GF 30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat resistance 82-148...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 Piel/zapatos
PA6 GF15 With High Tensile Strength (A1307C, A1317C) for Engineering Plastics

Viernes 05 enero 2024

PA6 GF15 with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 Ropa nino
PA66 GF50(A2011J) for Engineering Plastics

Viernes 05 enero 2024

PA66GF 50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of pa 6.6 gf50 (A2011J) PA66 50%GF HB grade is applied...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 510000 B2B Servicios
Wallbox DC Commercial Charger (SC Series)

Jueves 04 enero 2024

The Wallbox commercial dc fast charger (SC series) is a high-performance electric vehicle charging solution designed for commercial and industrial use. With its advanced DC fast charging technology, it offers rapid and reliable charging for a wide range of electric vehicles, making...

China 510000 B2B Servicios
Type 2 Mobile DC Charger

Jueves 04 enero 2024

Built to deliver fast and reliable charging on the go, our mobile charger is the perfect solution for electric vehicle owners. With its compact and portable design, it facilitates convenient charging anywhere. Equipped with a Type 2 connector, it is compatible with a wide range of...

China 510000 B2B Servicios
Portable DC Charger For EV (MC Series)

Jueves 04 enero 2024

The portable dc fast charger for ev (MC series) is a compact and versatile solution for electric vehicle charging. It offers fast DC charging capabilities in a portable design, making it suitable for on-the-go charging needs. With multiple safety features and compatibility with various EV models...

China 510000 B2B Servicios
Integrated Mobile DC EV Charger (XC Series)

Jueves 04 enero 2024

The Integrated Mobile DC EV Charger (XC series) is a cutting-edge, all-in-one solution for electric vehicle charging. Featuring mobility and a built-in mobile dc fast charger, it offers convenience for on-the-go EV charging needs. With advanced technology and user-friendly design...

China 212200 Medicina
PTFE Machined Parts

Miércoles 03 enero 2024

PTFE machined parts are custom-made components manufactured from polytetrafluoroethylene material. These parts are created through machining processes that involve cutting, drilling, and shaping PTFE plastic to meet specific design requirements. Machined PTFE parts offer outstanding...

Jiangsu Xinrui Plastic Technology Co.,Ltd

  • 212200 - Yangzhong
  • 86 0511 88222979
China 212200 Vehiculos
PTFE Film

Miércoles 03 enero 2024

Polytetrafluoroethylene film is made of PTFE resin by molding, sintering, cooling into blank, then by turning, calendering. The ptfe thin film made by turning is a non-oriented film, which becomes a oriented film after calendering. The non-oriented film is semi-oriented film by calendering 1...

Jiangsu Xinrui Plastic Technology Co.,Ltd

  • 212200 - Yangzhong
  • 86 0511 88222979
PTFE Corrugated Tube

Miércoles 03 enero 2024

The process is to make PTFE thin-walled tube at a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all the excellent performance of PTFE but also has the characteristics of flexural, mainly used for strong corrosion resistance and high temperature...

Jiangsu Xinrui Plastic Technology Co.,Ltd

  • 212200 - Yangzhong
  • 86 0511 88222979
China 212200 Batería de cocina
PTFE Braided Packing

Miércoles 03 enero 2024

PTFE braided packing is a new type of sealing packing with desperse Teflon tape or tensile belt after the woven. The graphited PTFE packing has excellent chemical stability, in hot and humid environments under constant intensity, easy loading and dismantling. PTFE Braided Packing...

Jiangsu Xinrui Plastic Technology Co.,Ltd

  • 212200 - Yangzhong
  • 86 0511 88222979
China 526060 Ropa nino
Black Casserole Pots With Glass Lid

Viernes 29 diciembre 2023

Durable non-stick pan with a lid for easy one-pot cooking for up to 6 people. 3-layer PFOA-free reinforced non-stick coating, safe for metal utensils. Wide range of uses: medium and small fire for daily cooking, even heating, long-lasting heat preservation, suitable for a casserole...

EMP Electric Appliance Co.Ltd

  • 526060 - Zhaoqing
  • 0758 2203787
China 130113 B2B Servicios
Peek in Bearing Material

Jueves 28 diciembre 2023

Peek in Bearing Material Due to its excellent mechanical strength, dynamic fatigue resistance, high-temperature resistance, creep resistance, self-lubrication and thermal expansion coefficient comparable to metals, PEEK material is replacing more metals and other engineering plastics...

Jilin Joinature Polymer Co.,Ltd.

  • 130113 - Changchun
  • (0431)89625588
China 130113 B2B Servicios
Peek Tubing Material

Jueves 28 diciembre 2023

Peek Tubing Material PEEK has great machinability, excellent dimensional stability, high-temperature resistance, creep resistance and hydrolysis resistance, can be used in a variety of machining ways, easy to control the tolerance. Applications: Sheets/ Rods/ Tubes/ 3D Filaments...

Jilin Joinature Polymer Co.,Ltd.

  • 130113 - Changchun
  • (0431)89625588
China 130113 B2B Servicios
PEEK in Electronic & Electrical

Jueves 28 diciembre 2023

PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environments, has wave permeability, dimensional stability and self-lubrication, keeps lower dielectric dissipation factor under various frequencies...

Jilin Joinature Polymer Co.,Ltd.

  • 130113 - Changchun
  • (0431)89625588
China 121000 Informática
5.5V Waterproof Supercapacitor

Sábado 09 diciembre 2023

Cantidad : 100000/day

Brief Introduction of Kamcap 5.5 V 1.0 F Sealed Supercapacitor SE Series Performance characteristics: Standard energy series Typical applications: RAM, detonator, car recorder, smart meter, vacuum switch, digital camera, motor drive, clock circuit, UPS, toy, program-controlled switch, etc...

JINZHOU KAIMEI POWER CO.,LTD

  • 121000 - Liaoning
  • 0416 4341210
  • 86 18640666860
China 518103 Varios / Descuento
Single Sided Glass Cloth Tape

Martes 05 diciembre 2023

Single sided glass cloth tape is made of 0.13 mm thick imported glass cloth coated with high-performance silicone adhesive. The thickness of Single sided glass cloth tape is 0.18 mm±0.02 mm. Single sided glass cloth tape has good temperature resistance (-50℃~260℃), strong adhesion...

HOPELIGHT ELECTRICAL CO.,LIMITED

  • 518103 - Fuyong
  • 86 755 29601820
China 518103 Varios / Descuento
Black Kapton Tape

Martes 05 diciembre 2023

Black Kapton tape ,also known as black polyimide tape or black PI tape, is a specialized adhesive tape that is composed of a black polyimide film substrate and a high-temperature silicone pressure-sensitive adhesive coating. This type of tape is specifically designed to provide excellent...

HOPELIGHT ELECTRICAL CO.,LIMITED

  • 518103 - Fuyong
  • 86 755 29601820
China 518103 Materias primeras
BBQ Grill Mat

Martes 05 diciembre 2023

BBQ grill mat, also known as PTFE glass cloth, Teflon cloth or BBQ grill cooking sheet, uses high-quality glass fibre as the woven material. As for the production of this type of heat resistant Teflon tape, it is normally first woven into a glass fibre cloth substrate by plain weave...

HOPELIGHT ELECTRICAL CO.,LIMITED

  • 518103 - Fuyong
  • 86 755 29601820
China 150028 Informática
Fine Wire Drawing Machine

Sábado 02 diciembre 2023

Cantidad : 500sets/ye - Precio : $3000~$700,000

Fine Wire Drawing Machine The Fine Wire Drawing Machine is an advanced machinery designed for precise and efficient reduction of metal wires, resulting in finer diameters and improved dimensional accuracy. This equipment finds application in various industries, including electronics...

HARBIN RAINBOW TECHNOLOGY CO., LTD.

  • 150028 - Harbin
  • 0451 51066797
China 215215 B2B Servicios
PA66 GF35 (A2000G, A2011G, A2111G) for Engineering Plastics

Miércoles 29 noviembre 2023

PA66 is nylon 66, namely pa66_gf35 is glass fiber. Generally expressed as PA66 GF35, that is, 35% glass fiber is added to nylon 66. Typical Application of PA 66 GF 35 (A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 B2B Servicios
PA66 GF30 Heat Stabilized (A2006F, A2016F) for Engineering Plastics

Miércoles 29 noviembre 2023

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, forinjection moulding. PA6 6 GF30 is a common nylon material known for its high strength and durability, as well as provides enhanced mechanical properties. The glass fiber reinforcement of PA66 30 GF plastic improves...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 B2B Servicios
PA66 GF30 Halogen-free FR (A2015F) for Engineering Plastics

Miércoles 29 noviembre 2023

Material PA 66 GF 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 B2B Servicios
PA66 GF30 Halogenated FR (A2014F, A2114F) for Engineering Plastics

Miércoles 29 noviembre 2023

PA 66GF30 FR is a Nylon 66 with 30% glass-fibers and flame retardant halogenated. Typical Application of PA66 GF30 Halogenated FR (A2014F) The advantage of nylon 66 GF30 halogenated FR can maintain the original physical and chemical properties of flame retardant products. Processing...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 B2B Servicios
PA66 GF20 With High Tensile Strength (A2307D, A2317D) for Engineering Plastics

Miércoles 29 noviembre 2023

Elastomer toughened nylon 66 with 20% glass fiber is called PA66 GF20, it shows high oil resistance, high impact resistance, good resistance to low-temperature notch impact strength for high impact resistance parts. Anmei modified plastic, as a big and responsible PA66 GF 20 manufacturer...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 B2B Servicios
PA66 GF20 Halogenated FR (A2014D, A2114D) for Engineering Plastics

Miércoles 29 noviembre 2023

Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF 20 halogenated FR. Typical Application of Anmei PA66 GF20 Halogenated FR (A2014D) (A2015D) PA66 20% glass fiber and halogenated flame resistance mixed modified...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 215215 B2B Servicios
PA66 GF15 With High Tensile Strength (A2307C, A2317C) for Engineering Plastics

Miércoles 29 noviembre 2023

PA6 6GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding Typical Application of Anmei Group PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with...

Suzhou Anmei Material Technology Co., Ltd

  • 215215 - Suzhou
  • 86 0512 63012966
China 325600 B2B Servicios
Ship inverters complying with maritime certificates

Miércoles 22 noviembre 2023

Cantidad : 888 - Precio : 1000-15000USD/set

1. Wide input voltage: the input voltage range is 130-300v for single-phase power supply and 260-500v for three-phase power supply, which ensures to adapt to the environment of multiple types of ship power supply. 2. Stable output voltage: the marine inverter can provide 220v/380v ± 0...

Zhejiang Bangzhao Electric Co.,Ltd

  • 325600 - Yueqing
  • +86 18969760766
Nombre de resultados por pàgina : 6 30 150

Búsqueda 260℃