MEDIUM - 7281 Anuncios

Viernes 06 diciembre 2019

Cantidad : 80 tonnes - Precio : 1030 Euro/ tonne

Mambo C 1.5/32 (AC)=64 Balles; bema N 1.5/32 (AH)= 37 balles ; Bema C 1.8 (EZ)=36 Balles; Bema C 1.5/32 (AZ)=37 Balles; Bilo 1.1/8 (EK)=01 Balle;Bilo 1.5/32 (AK)=03 Balles ; Coré 1.1/8 (EJ)=33 balles; Coré 1.5/32 (AJ)=37 balles;Buka 1.1/8 (ES)=15 balles; Buka 1.5/32 (AS)=39 balles...

Martes 26 noviembre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic information Venturi flowmeter is adopted in the body of a balanced valve with threaded connections to make flow adjustment more accurate and flow monitoring more convenient. Accurately balance the flow of each branch or end of the system. Features of bronze balancing valve 1...

Martes 26 noviembre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

To withstand high temperature, the metal seal must be used, but large leakage; For zero leakage, rubber seal must be used, but not high-temperature resistant. In order to overcome the contradiction of the double eccentric butterfly valve China , the was carried out. The structural...

Martes 26 noviembre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Strainers, dirt separators and backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these three types of products, we can analyze from the following points: first, flow resistance. Many manufacturers tend to ignore this point and...

Martes 26 noviembre 2019

Cantidad : 30000 Unit - Precio : 5000-50000USD

What is LPG storage tank LPG storage tanks are specialized products for the storage of liquefied petroleum gas, belonging to special equipment. The material includes Q345R & Q370R, and AS-ME standard material SA516M & SA517M. The shape is cylindrical with 2 end plates. Usually...

Sábado 16 noviembre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

Our Saw Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, Asphalt, Bricks etc. Synthetic diamond grit provides premium thermal stability and impacts resistance performance. EA-S700 Highest toughness...

Sábado 16 noviembre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

PCD blank for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping...

Sábado 16 noviembre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

Our micron diamond powder offers good Roughing, Lapping and finishing result. For resin bond, vitrified bond, and electroplated bond. Application: for stone, watch, optical glass etc. EA-MW19 Irregular shape, low toughness, uniform Particle Size Distribution. The best choice when...

Jueves 14 noviembre 2019

SINOFLOC is offering a broad range of leading-class friction reducer to our customers from fresh water to heavy brines. Our product range includes anionic polyacrylamide powder, anionic polyacrylamide emulsion and cationic polyacrylamide powder, which have been approved excellent...

Sábado 09 noviembre 2019

Cantidad : 500 sets - Precio : USD2,500

China Charcoal Pellet Machine Factory China charcoal pellet machine factory is located in Xingyang City. It is mainly used for high-density metal scrap (scrap iron, copper scrap, aluminum scrap, etc.), granular powder metal powder (iron powder, aluminum powder, copper powder, lead powder, etc...)

Sábado 09 noviembre 2019

Cantidad : 500 sets - Precio : USD2,500

China Charcoal Pellet Machine Marketing Price This series of China charcoal pellet machine marketing price will pass the power on to the two pressure roller through the reducer.The two sides and roll rotation, in both the rotating roll,Natural materials to enter the ball roll mode...

Sábado 09 noviembre 2019

Cantidad : 500 sets - Precio : USD2,500

Charcoal Pellet Machine China Price Charcoal pellet machine China price is mainly used for high-density metal scrap (scrap iron, copper scrap, aluminum scrap, etc.), granular powder metal powder (iron powder, aluminum powder, copper powder, lead powder, etc.) , metallurgical additives...

Viernes 08 noviembre 2019

Cantidad : 1 set - Precio : USD3500

Our gypsum briquetting machine can be used to form coal, coal fines, coal powder, charcoal powder, iron dust, gypsum powder, salt, coke, lime powder, mineral powder and soda ash. Also it can make briquettes of anthracite, ash, iron oxide, iron concentrate, metal powder, iron powder...

Martes 05 noviembre 2019

Cantidad : 20 - Precio : 20,000 USD - 800,000

RISHBIN Medium Gauge Slitters is used to slit the big rolls into narrow rolls, and packaging it automatically. It works of max. thickness up to 10mm, max. width of up to 2200mm, and speed of up to 100 m/min. It consists of Decoiler with coil car, guiding & pinch device, medium gauge slitters...

Martes 05 noviembre 2019

Cantidad : 20 - Precio : 20,000 USD - 800,000

Machine Reviews RISHBIN Heavy Gauge Slitters are designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to 2500mm, and speed of up to 60 m/min. It consists of Decoiler with coil car, guiding & pinch device, heavy gauge slitters...

Martes 05 noviembre 2019

Cantidad : 20 - Precio : 20,000 USD - 800,000

Are you looking for a professional steel slitting machine manufacturer? Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Classification and Characteristics of Stainless Steel Slitting Machine 1. Small stainless steel slitting machine...

Martes 05 noviembre 2019

Cantidad : 20 - Precio : 20,000 USD - 800,000

Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line machine according to client's special requirement by...

Viernes 01 noviembre 2019

The worm gear slew drive is a full-cycle rotary reduction transmission mechanism integrated with a driving power source. The high precision bearings are used as a transmission follower and a mechanism attachment member, and an active member and a driving source are attached to one...

Viernes 01 noviembre 2019

Cantidad : 200 units - Precio : 7000-28000 USD

The big irregular workpieces blasting and painting job has been widely completed by sand blasting rooms and painting rooms, cause of this of kind parts have all kinds of shape, it is very hard to arrangement the blasting turbines to automatically blast cleaning the big workpieces at all angles...

Miércoles 30 octubre 2019

HanKing Mould technology of shenzhen hanking for globally Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing Mould Enginering Ltd. to provide customers the fast development time and stable quality to ensure the new project running well...

Miércoles 30 octubre 2019

GÉNÉRAL: Le Kwang Dah Modèle semi-automatique de cartonnage automatique (KDM-300) encartonneuse vertical intermittent automatique d' ouverture / pliage des cartons pour l' insertion manuelle du récipient, puis se ferme automatiquement rabat botton. Le KDM-300 peut gérer large gamme...

Miércoles 30 octubre 2019

GÉNÉRAL: Après les expériences de production accumulées par KD dans la fabrication de plusieurs mille ensembles de machine de remplissage à fermeture verticale KDF-2, KD a mis au point le dernier KDF-2H, une remplisseuse à fermeture horizontale. Le KDF-2H peut fonctionner plus efficacement...

Miércoles 30 octubre 2019

GÉNÉRALE: KWANG DAH-Symbolise la haute qualité et professionalis est un fabricant unique au monde. KWANG DAH est spécialisé dans la conception et la fabrication de machines pour la fabrication de capsules depuis 1945. Les machines de la série sont les suivantes: machine de remplissage...

Martes 29 octubre 2019

Cantidad : 200 units - Precio : 7000-28000 USD

The Barrel Machine line provides outstanding performance and reliability. Designed for foundry, forge and heat treat requirements. The Barrel machine is the ideal solution to clean small to medium size parts that would normally become jammed in traditional Tumblast machine. The Barrel...

Martes 29 octubre 2019

The JMZ-T series rubber sandwich mounts is the new designed model, which is designed especially for the military use. Comparing with the wire rope isolators, this model is small and tinny, which has no worrying about the space limits. The max static load of the JMZ-T Series anti vibration...

Martes 29 octubre 2019

Precio : 30-210 USD

What is High Tg PCB When the temperature rises to a certain area, the substrate will change from "glass state" to "rubber state", and the temperature at this time is called the glass transition temperature (Tg) of the plate. That is, Tg is the highest temperature (°C) at which the...

Sábado 26 octubre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Most of the 2.5 inch butterfly valve used in the walkway begin to be made of ductile cast iron, as copper or stainless steel becomes much more expensive. The number of butterfly valves used in the 2.5 inch small bore pipe will be more because butterfly valves are light in structure...

Sábado 26 octubre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic information of Wafer Concentric Butterfly Valve with Post Indicator This valve can be used to open or close the medium in the fluid pipe and is one of the accessories of the automatic sprinkler system in fire engineering. Features of Wafer Concentric post indicator butterfly valve 1...

Sábado 26 octubre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

Our synthetic diamond grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, Asphalt, Bricks etc. Diamond grit powder provides premium thermal stability and impacts resistance performance. EA-S700 Highest toughness...

Sábado 26 octubre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

Friable Diamond Each Particle is with sub-crystal structure. Irregular and Very rough surface. New cutting edges come out during working. Also available in electroless plating of both nickel (30% and 56% by wt.) and copper (50% by wt.) allowing for better crystal retention in both...