BIKE&ELECTRIC - 13422 Anuncios

Sábado 06 mayo 2023

Magnetic eddy current separator machine is also known as non-ferrous separators, which uses the induction principle (eddy current) of a high-frequency magnetic field to separate non-ferrous metals. High-capacity permanent magnet drum traveling at a high speed inside an eddy current...

Sábado 06 mayo 2023

Cantidad : 200 - Precio : 200000-800000

Stainless Steel Polishing Machine has been designed for applying a fine coat of finish to metals, specifically stainless steel. The machine could be used to polish the entire surface of a stainless steel item or just parts of it. STAINLESS STEEL POLISHING MACHINE PROVIDED BY XIHE...

Sábado 06 mayo 2023

Cantidad : 200 - Precio : 200000-800000

The equipment is used to stretch the workpiece after the welding and crimping process. After the completion of our welding and crimping process, the product will be sent to the electric stretching machine through the conveyor wheel. The stretching equipment will stretch the workpiece...

Sábado 06 mayo 2023

The microstructure of duplex stainless steel pipe is approximately 50% ferrite (body-centered cubic structure) and 50% austenite (face-centered cubic structure) crystal structure. The two phases coexist as a stable mixture, but this is different from two-phase alloys, where one of...

Sábado 06 mayo 2023

Nickel alloy is one of the most useful materials for manufacturing technically superior nickel and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloy is exceptionally corrosion-resistant and can be used in high-temperature...

Sábado 06 mayo 2023

Precio : USD2-USD200

Zero-emission vehicles may not be a novel concept for long. SDZ is navigating into trend of energy-transition era and expects a cleaner ecosystem in the future. We are using knowledge and experience over many years across the automotive industry to advance this target in the future...

Sábado 06 mayo 2023

Precio : USD2-USD200

Parts of Engine Cooling System 30% of the heat generated by engine combustion is taken away by the automotive cooling system components and dissipated into the air by the cooling fan. The key objective of the car engine cooling system parts is to keep the engine at optimum efficiency...

Sábado 06 mayo 2023

Precio : USD2-USD200

Overview of SDZ Products in Automotive Industry The engine is the power source that makes the car move. Vehicle engine components play vital function can not be ignored. To keep engine running in good condition, the importance of the cooling system cannot be overlooked. Since SDZ...

Sábado 06 mayo 2023

The main production lines of pet bottle recycling washing machine are conveyor belt, off-label machine, sorting table, crusher, hot water steamer, screw elevator, high-speed friction cleaning machine, single (double) screw rinsing machine, centrifugal dehydrator, cyclone silo, electric...

Sábado 06 mayo 2023

Cantidad : 50000sets/ - Precio : 10-500USD/SET

Compared with ball bearings, miniature cylindrical roller bearings have higher radial load capacity. The design of cylindrical rolling elements also allows cam roller bearings to accept relatively faster speeds than other forms of roller bearings. High speed cylindrical roller bearings...

Sábado 06 mayo 2023

Balancing valve working principle is about how balance valve works. Balance valve is a dynamic and static balancing valve under hydraulic conditions, such as static balance valve, dynamic balance valve. Valve body material: cast iron, cast steel .work pressure is 0.6-4.0MPA. The working...

Sábado 06 mayo 2023

Precio : 100USD

KRD70 series hydraulic vibration shaker is an electronic hydraulic servo vibration test machine with the advantages of fast response speed, high anti-load rigidity, flexible control mode, high performance, and high reliability. The hydraulic vibration shaker is a device that converts...

Sábado 06 mayo 2023

Precio : 100USD

KRD61 series 6-DOF test table is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provide the user's system single 6-DOF (X, Y, Z, α, β, γ) motion of longitudinal, horizontal, vertical, roll, pitch, and heave. This multi axial...

Viernes 05 mayo 2023

The Dengue Ag NS1-IgM/IgG dengue NS1 kit detects IgG and IgM anti-dengue virus and circulating dengue antigen in one test within 20 minutes. This dengue rapid test kit is user-friendly, does not require cumbersome laboratory equipment and requires minimal staff training. The Dengue...

Viernes 05 mayo 2023

Precio : ￥30~200 RMB

Magnetic sensors and their applications magnetic sensors are widely used in various actuator components such as cylinders, electric cylinders, and oil cylinders. You can find pneumatic magnetic sensor and their applications in thousands of automation scenarios such as manufacturing...

Viernes 05 mayo 2023

Precio : ￥30~200 RMB

ALIF sensor pneumatic cylinder is the core electronic component of automatic control, which is composed of a shell, magnetic components, electronic circuits and wires. Through the detection of the travel position of the actuator, the purpose of automatic control such as positioning...

Viernes 05 mayo 2023

The rotary drum vacuum filter is a type of continuous filter that is commonly used in industrial processes for solid-liquid separation. The filter media used in a rotary drum vacuum filter is wrapped around the drum. The choice of filter media depends on the application, as different...

Viernes 05 mayo 2023

Electrophoresis metal coating can be called electrocoating, e-coating, electrophoretic painting, and probably a few other things. In any case, the parts are immersed in solution in an electrified tank containing the paint. Electrophoresis plating is drawn to the parts, where the addition...

Viernes 05 mayo 2023

Cantidad : 200,000/mo - Precio : 20USD-200USD

Intermediate frequency electrotherapy is the application of alternating current (including sine wave, pulse wave and modulated wave, etc.) with a frequency of 1kHz-100kHz for treatment and rehabilitation. At present, in the physical therapy industry, intermediate frequency electrical...

Viernes 05 mayo 2023

Cantidad : 200,000/mo - Precio : 20USD-200USD

Beoka K6 handheld sports lcd display massage gun has about 26KG of stall force, which is the weight you can exert on the device before the sports gun massager stalls and stops moving. This enables the user to exert more pressure to reach deeper into the target area by using this...

Viernes 05 mayo 2023

Cantidad : 200,000/mo - Precio : 20USD-200USD

Beoka shiatsu machine for leg pain relief with heat is professional in 4 ways: This massager for thigh pain is the Optimized result of the boot recovery system. This main device that controls the leg pain reliever machine is much smaller than the boot recovery system, which makes...

Viernes 05 mayo 2023

Most of the world's steel is made into finished products by stamping. The body, chassis, fuel tank and radiator sheet of automobiles, steam ladle of boilers, the shell of containers, and silicon steel sheet of the iron core of motors and electric appliances are all stamping processes...

Sábado 29 abril 2023

Cantidad : 500K/month - Precio : 0~60 USD

Size: 8.9 inch Resolution: 800*1280 Active Area: 119.28*190.85 Interface: MIPI View Angle: IPS Brightness: 350 cd/m² Touch Panel: Support CTP/RTP Supply Type: Factory/Manufacturer Certification: ISO9001, IATF16949, ROHS, REACH Overview of PJ8901B01 8.9 Inch LCD Display 800*1280...

Sábado 29 abril 2023

Cantidad : 500K/month - Precio : 0~60 USD

Type: AMOLED, PMOLED Size: 1.2"to 1.78" Resolution: 64*128 to 454*454 Interface: MIPI, SPI, QSPI, MCU Touch: Oncell or incell View angle: 4JNCD/160 It refers to the phenomenon that organic semiconductor materials and light-emitting materials emit light through carrier injection and...

Sábado 29 abril 2023

The latest generation of IEC AC charging piles supports charging power of up to 22KW and has an electronic display that dynamically shows charging efficiency. The charging piles are equipped with the ocpp platform which provides customers with online access to the charging status...

Sábado 29 abril 2023

Charger-Union including AC Chargers and DC Chargers. IEC AC Chargers comply with IEC61851-1 standard, AC Chargers can be applied for household or commercial scenes, and DC Chargers are suitable for industrial charging scenarios. Types of IEC Charger Type 2 AC Charger The IEC AC charger...

Sábado 29 abril 2023

Charge-Uni AC and DC products comply with the GB/T 18487.1-2015 standard. The AC Charger comes with compact size and simple design, and customers can choose wall-mounted or stand-pillar installation. The DC charger has a power of up to 180 kW, which further reduces charging time and...

Sábado 29 abril 2023

Charge-Uni GB/T AC chargers comes with IP55 protection level with longer product lifecycle. At the same time, the simple operation provides customers with a convenient charging service. Types of GB/T AC Level 2 Vehicle Charger 7KW GB/T AC Charger GB/T AC Level 2 EV Car Charger Features  1...

Sábado 29 abril 2023

Charge Uni IEC standard DC charging piles can reach up to 180KW to meet different scenarios; at the same time, they are adaptable to various harsh environment by their excellent design and protection performance. Types of DC Chargers 60KW DC CCS Charger 120KW CCS2 DC Charger 180KW...

Sábado 29 abril 2023

Type 2 7kw charger is easily realized data transmission with OCPP1.6 function in most scenarios. It has a simple design with wall mounting or pillar standing. With its weatherproof and impact-resistant design, the 7 KW Charger can withstand harsh environments and is well working for...