DIMENSION - 15103 Anuncios

Sábado 08 abril 2023

After the PCB board is drilled, various holes on the PCB board will appear different degrees of sharp edges due to different drilling parameters, life of the drill tip and other factors. When the burring occurs, it needs to be polished with sandpaper. When grinding, dust will fall...

Sábado 08 abril 2023

Cantidad : 200sets pe - Precio : 100-5000

TPOW series single-stage double suction split case centrifugal pump adopts the original and modified impeller and cutting and has the characteristics of full range, wide range and high efficiency. The single stage centrifugal horizontal split case pump can provide the operating...

Viernes 07 abril 2023

The automatic steel coil slitting line is used for slitting wide steel coils into certain width strips coils. On the upper/lower blade axle of the steel coil slitting line, there is the round disk blade; it could be adjusted on the blade axle according to the slitting width, use screw...

Viernes 07 abril 2023

SINGLE SIDE HYDRAULIC DECOILER The regular hydraulic decoiler machine adopts a cantilever-type structure. It Includes a machine frame, cantilever type extension, decoiler driving system (by motor), Hydraulic system, and electric control system, Etc., with the function of installing...

Viernes 07 abril 2023

Penta Prisms are used to define right angles in optical systems. Penta Prisms, which provide right handed images, feature a ray deviation of 90°. Penta Prisms are five-sided prisms and unaffected by slight movements. Edmund Optics offers a variety of Penta Prisms for optimal performance...

Viernes 07 abril 2023

Dove prisms are used as reflective prism inverting the image. Dove prism is shaped from a truncated right-angle prism. Normally, dove prisms are used in the parallel optical path based on critical angle principle to meet total internal reflection with limited FOV. A beam of light...

Viernes 07 abril 2023

Corner Cube Retroreflectors Corner cube prism is total reflecting prism formed by 3 perpendicular surfaces, where the incident light angle does not influence the final emerging light angle but reflected by 180°, it offers excellent parallelism between the incident and exit beams...

Viernes 07 abril 2023

Custom Optical Prisms Micro Prisms, Rhomboid Prisms, Penta Prisms, PBS, Custom Coating Hyperion Optics supplies a range of pellin broca prism to meet UV-Visible-NIR applications, with high surface quality and tight tolerance angles. Our materials selection ranges from flint/crown glasses...

Viernes 07 abril 2023

Sunflower Stainless steel tactile Mat (XC-MDB6006K/6011K) Dimensions: 300mm X 300mm X 6.0mm (1.2/ 1.5mm base, 4.7mm high tactile projections). Material: 316L /304 stainless steel (one piece construction) Colors: Stainless steel lustre, black surface finish. Type: Hazard, directional...

Viernes 07 abril 2023

Directional Stainless steel tactile indicator (XC-MDT5089B) Plastics sunflower surface,Solid studs with pin Place of Origin: Zhejiang,China (Mainland) Brand Name: XC Advantage: Factory Directly Sale Function: Anti-slip and provide protection for the blind and disabled The Details...

Viernes 07 abril 2023

Directional Stainless steel tactile indicator (XC-MDT5089B) Plastics sunflower surface,Solid studs with pin Place of Origin: Zhejiang,China (Mainland) Brand Name: XC Advantage: Factory Directly Sale Function: Anti-slip and provide protection for the blind and disabled The Details...

Viernes 07 abril 2023

Skatestops (XC-MDD1700C) Place of Origin: Zhejiang, China (Mainland) Brand Name: XC Advantage: Factory Directly Sale Function: Anti-slip and provide protection for the blind and disabled The Details of Skatestops DIMENSIONS: 35mm FINISH: Machined Material : SUS316L FIXING METHOD ...

Viernes 07 abril 2023

Cantidad : Quantities

Sibai has percentage orders of die casting, from Aluminium alloy and Zinc alloy (Zamak) material. The die casting can realize complex inner structure by the casting die, and can make large quantity. Die Casting Parts Features Die casting is a method, in which liquid or semi-liquid...

Viernes 07 abril 2023

Cantidad : Quantities

Sibai provide custom metal washers from almost any material: Steel, Stainless Steel, Aluminum, Brass, Copper, Titanium, Nylon, Acetal, PTFE, Fiberglass, Rubber and more. The finishing capabilities Sibai can provide are Heat treating, Plating, Flattening, Painting, Grinding, Coating...

Viernes 07 abril 2023

Cantidad : Quantities

Sibai provides gear part according to customers' need. We provide these custom cut gears according to DIN 867 standard. Customized Gears Features A bush gear custom fabrication is a device that transmits power during mechanical operation. It is a facility that transmits the power...

Miércoles 05 abril 2023

LSP-3 Security Pedestal Based on the industry-leading Invengo Medio L400 electronics, the Invengo L-SP3 security access control pedestal uses advances in Digital Signal Processing (DSP) and RF Front End technology to achieve breakthrough performance in reading range and read speed...

Martes 04 abril 2023

Precio : 100USD

A self operated control valve, also known as a self actuated temperature control valve or self actuated pressure control valve, is an auto control valve that relies on the pressure and temperature of the medium flowing through the valve as an energy source to drive the self actuated...

Sábado 01 abril 2023

How to build a plastic precision mould? We have been manufacturing plastic precision moulds and components for more than ten years. With our expertise and experience, we provide valuable mold opening suggestions to our customers according to their specific needs, thus helping customers...

Sábado 01 abril 2023

Precio : USD0.1-15

When it comes to plastic injection molding, precise moulds and precision equipment are required for precision molding or PIM. Among the topics covered in this blog are general ideas, specific traits and qualities, as well as specific options for plastic materials, precision moulds...

Sábado 01 abril 2023

XTY-300LE11070 is specially designed for cardboard, carton, newspaper, soft plastic film etc. with wide feed opening door. The wide feed opening door will lift upwards automatically when the platen goes up. The operation is very convenient. Pressure: 30tons Feed Opening Size (L*H)...

Sábado 01 abril 2023

Large-sized full automatic two ram baler is the ideal model for many different materials such as OCC, plastic, HDPE, PET, aluminum cans, steel cans, waste tires and so on and be good at compressing different types of highly expanded, high hardness materials. Pressing: 125tons Motor Power...

Sábado 01 abril 2023

XTR- 1250W15075-75 Large-Sized Fully Automatic Horizontal Baler XTR-1250W15075-75 is equipped with latest auto tying system imported from America Accent which works very efficiently with low failure and high bale density. To make the machine more durable and strong, it is also equipped...

Sábado 01 abril 2023

XTR-400W7575P Fully Automatic Baler XTR-400W7575P is specialized in recycling solid waste materials like non-woven fabric, melting spray etc. Its operation is very easy and convenient. Automatically compress and bale with PP strap reducing baling material cost. Pressing: 40T Motor Power...

Sábado 01 abril 2023

XTY-1500LF11042 is equipped with a special door design: the front and back doors can opentogether for convenient strapping.Independent feed opening and automatic bale out design make the operation more simple and easy. Pressure: 150tons Feed Opening Size (L*H): 1100*1400mm Baling Chamber Height...

Sábado 01 abril 2023

SX-200LA8060 is another model which is popular among many customers because it can be single phase which is very necessary in some areas. Bottom liquid receiver is optional for collecting the liquid from the compressing materials. Pressure: 20tons Feed Opening Size (L*H): 700*400mm...

Sábado 01 abril 2023

XTY-600LE180100 is equipped with high-quality configurations all which help make long lifespan of the machine. NOK seal from Japan means longer lifespan of the seals. Japan A.M.C. oil pipe joint prevent the machine from oil leakage problems. Less space is needed for installation with...

Sábado 01 abril 2023

Particular cutter design with double cutting enhances the cutter working efficiency and lifespan. The Taiwan imported hydraulic valves of high quality are used to keep the stable running of the machine. Pressure: 100tons Main Motor Power: 30kw Cooling System: air cooler/water cooler...

Jueves 30 marzo 2023

Making a precast concrete formwork magnet includes a lot of fastening work: fastening formwork on mold table, fixing wire boxes at designated spots etc. The traditional practice would be drilling holes and then inserting pins for fastening. To be more exact: drilling holes both on...

Jueves 30 marzo 2023

They are round magnets with hole in center and they can be also called: pot magnet with borehole, pot magnet with mounting holes, holding magnet with borehole, etc. This is one of the most widely used pot magnets. They are made by gluing magnets and steel pots together. Filling materials...

Miércoles 29 marzo 2023

Non standard bearings are bearings that do not conform to the outline dimensions stipulated by the national standards, that is, the outline dimensions are different from all bearings stipulated by the national standards. Non-standard bearings have low versatility and are mostly used...