SURFACES - 18830 Anuncios

Lunes 09 octubre 2023

Multi-Purpose Resin with Optimum Toughness and Processing Speed Ultracur3D ST 45 B by Forward AM are reactive urethane photopolymers for Tough applications that delivers an excellent combination of high strength, plus long-term toughness and impact resistance. It is very well suited...

Lunes 09 octubre 2023

Stereo lithography Appearance (SLA) is a member of the vat photopolymerization family of processes for additive manufacturing. In Stereo lithography Appearance (SLA), UV lasers are used as the light source to selectively cure a polymer resin. RSPro Series The RSPro range of stereolithography...

Lunes 09 octubre 2023

Steel Searcher-Steel Pipe having a hollow section much longer than its diameter or circumference. According to the sectional shape, structural steel can be divided into round steel pipe, square steel pipe, rectangular steel pipe and special-shaped steel tubes; According to the structural...

Lunes 09 octubre 2023

Large SLA 3D Printer RSPro2100 is our largest format SLA 3D machine printer. There are three laser scanning, this innovative scanning additive manufacturing system is perfectly suited for the industrial production of large, high quality finished parts as well as mass part production...

Lunes 09 octubre 2023

Steel Searcher Steel Supply Chain seamless steel pipe for sale The seamless steel pipe is made of perforated whole round steel, and the steel pipe without weld seam on the surface is called seamless steel pipe. For steel pipe wholesale at retail competitive price, inquiry Steel Searcher now...

Lunes 09 octubre 2023

Prepainted Steel coil is hot galvanized plate, hot galvanized aluminum zinc plate, galvanized plate and other substrates, the surface pretreatment (chemical degreasing and chemical conversion treatment), on the surface coated with a layer or several layers of organic coating and then...

Lunes 09 octubre 2023

With the ultra-slim design, design to high power led construction, available in 3, 4 & 6 LED models, SMBX SM3020 series is an ideal solution for vehicles and applications requiring R65 and SAE J595 Class 1 approved an amber warning light. Several units can be linked to synchronize...

Domingo 08 octubre 2023

Silicon Fluids are a type of synthetic lubricant made from polydimethylsiloxane (PDMS) and other silicone-based compounds. They are designed to provide superior lubrication, thermal stability, and protection against corrosion and wear due to their low surface tension and high viscosity...

Domingo 08 octubre 2023

Silicone Gel is not edible. Silicone is the old name of silicone. Later, because silicone is homonymous with tin or selenium, it was changed to silicone to distinguish it. In Taiwan and other Asian countries, silica gel is still called silica gel. Silica gel, also known as siloxanes...

Domingo 08 octubre 2023

Self-Adhesive LSR is a type of liquid silicone rubber specifically designed for applications where a permanent bond is required between two surfaces. It has a unique ability to bond to many different substrates, making it a popular choice for a variety of industries. Self-Adhesive...

Domingo 08 octubre 2023

Methyl hydrogen silicone oil is a chemical substance, commonly known as hydrogen silicone oil, its molecular formula is (CH3) 3si0 [(CH3) (H) Si0] NSI (CH3) 3. The biggest advantage of methyl hydrogen silicone oil is its good waterproof effect. Under the action of metal salt catalyst...

Domingo 08 octubre 2023

At Betely, we are committed to providing superior quality products and service. Designed to withstanding high temperatures and resisting abrasion and corrosion, our products are safe and reliable, offering superior durability and performance. Our medical grade silicone rubber is...

Domingo 08 octubre 2023

Phenyl Silicone Oil is a type of silicone-based product that is used in a variety of products and industries. It is a clear, colorless liquid that is odorless and non-toxic. It has a low surface tension, high dielectric strength, and low volumetric expansion. It also has a high flash point...

Domingo 08 octubre 2023

BTL Conductive Ink is an innovative and versatile product made from a spot of conductive, silver-based ink. It is a great solution for applications that require an efficient and cost-effective way to create a conductive path between different components. With its easy-to-use formulation...

Domingo 08 octubre 2023

1,1,3,3-Tetramethyldisilazane CAS No.: 15933-59-2 It is a good monomer for the synthesis of polymers. It can be used as coatings and silicone rubber Benefits of 1,1,3,3-Tetramethyldisilazane CAS.15933 59 2 Enhanced Adhesion: It acts as a surface conditioner in coatings, improving...

Domingo 08 octubre 2023

BTL Silane Coupling Agent is a specialty chemical used to improve the performance of polymers composites by increasing the bond strength between the resin and the filler. It is a chemical compound made up of Si-O-Si bonds, which act as a bridge between two materials, allowing them...

Domingo 08 octubre 2023

Cantidad : 130000 pcs - Precio : $0.02~$0.40 per piec

The plastic and rubber parts of the reinforced cable glands are made of the best materials. The plastic cable gland is more solid and the surface is more wear-resistant; rubber seals and gaskets have better thickness and flexibility and are made with precision, which is 100% compatible...

Viernes 29 septiembre 2023

Coppered steel wire refers to the surface of the steel wire electroplated with a layer of copper, the main purpose is to enhance the anti-corrosion performance of the steel wire, as well as to extend its service life. Our coppered steel wire always uses high-quality steel wire as...

Viernes 29 septiembre 2023

Carbon steel wire refers to very high strength and hardness. Compared to other steel wire, its cutting ability of diamond cup brush and cup steel brush is stronger, but the toughness will be slightly less. However, the carbon steel wire itself has a lower cost, so the price of this...

Viernes 29 septiembre 2023

Types of nylon cylinder brush According to the different brush material and the different production mode, the use of brush roll made by nylon roller brush manufacturers has the very big difference. Commonly available are abrasive brush rollers and rubber roller brush, as well as...

Viernes 29 septiembre 2023

Rotary brass wire brush, the texture of copper wire is softer than steel, suitable for processing the workpiece with low hardness, removing the surface coating of the workpiece, rust removal and other purposes. And the metal activity of brass is low, has a certain corrosion resistance...

Viernes 29 septiembre 2023

With the help of a technology development team for professional printed circuit board manufacturers, HUIHE Circuits has mastered advanced technology in the PCB industry, our PCB company own reliable production equipment, test machine and fully functional P&C lab. Our printing...

Viernes 29 septiembre 2023

Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner layer W/S: 4/3mil Thickness: 1.2mm Min. hole diameter: 0.2mm Special process: impedance control Advantages Of 8 Layer PCB Own lamination process to convenient production for Multilayer PCB and...

Viernes 29 septiembre 2023

The integrated solar led street light perfectly integrates lithium iron phosphate batteries, solar panels and a charger built into the lamp. The independent tiltable LED light source and lamp post mounting bracket can concentrate the beam on the road surface. Most of the integrated...

Viernes 29 septiembre 2023

Precio : 100USD

As a China CNC machining medical supplier with over 20 years of experience, ETCN is specialized in offering custom CNC plastic machining services. As the technical CNC machining service supplier, we have various types of CNC processing equipment and testing equipment to help us control...

Viernes 29 septiembre 2023

Precio : 100USD

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by CNC grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china machining is combined with...

Viernes 29 septiembre 2023

Metal injection molding china technology was first used to make some orthodontic appliances in medical treatment. These precision products have very small size, good biocompatibility and corrosion resistance. The main material used is 17-4PH stainless steel. At present, orthodontic...

Viernes 29 septiembre 2023

Precio : 100USD

CNC boring is used for the shaft sleeve in the transmission shaft of large equipment, and the tolerance of the bearing position is +0.03mm. After welding the accessories, use CNC horizontal boring and milling equipment to process both sides with a concentricity of 0.05mm. CNC Boring...

Viernes 29 septiembre 2023

MIM stand for metal injection molding china, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Viernes 29 septiembre 2023

Belt buckle is also called belt head or belt buckle head. Belt buckle is a hardware accessory at the front end of the belt. Used to decorate and fix the whole belt. Belt Buckle Specifications Product key words: Stainless steel pen holder trim materials: stainless steel 316L 304 17-4PH...