VALVE F00RJ00005 - 5565 Anuncios

Miércoles 18 octubre 2017

DIN Standard Safety Valve Features: Safety valves were first used on steam boilers during the industrial revolution. Early boilers without them were prone to accidental Explosion. Safety valves also evolved to protect equipment such as pressure vessel (fired or not) and heat exchangers...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve mainly composed of valve body, valve seat and valve flap. It adopts the structure of double valve seat and double cone valve flap. It adopts pressure balancing valve flap. Realize remote control and auto control through valve flap elevation...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, mainly composed of membrane, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the membrane and drive the valve flap, change and control...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, it is manufactured and designed on the basis of advantages of foreign same products. It is mainly composed of membrane, valve flap, and adjusting spring. It sense the change of lower...

Miércoles 18 octubre 2017

Brief Introduction. YB43X is Proportion type pressure reducing valve,as its floating piston ends have different cross-sectional area,there will be a fixed pressure differential between the valve inlet and outlet,thereby change the outlet pressure conditions,achieve the purpose of decompression...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct acting bellows pressure reducing valve, It is mainly composed of bellows, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the bellows and drive the valve flap, change and control...

Miércoles 18 octubre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Miércoles 18 octubre 2017

Brief Introduction. RP-6 high-sensitivity steam pressure reducing valve is pilot piston type pressure reducing valve mainly used for steam.The product made following improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve for steam, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap...

Miércoles 18 octubre 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Miércoles 18 octubre 2017

Brief Introduction. DP27 Pilot Operated Pressure Reducing Valve is the new type pilot extra-huge membrane pressure reducing valve developed by our company,similar to Spirax Sarco Design. It is greatly improved on basis of normal pressure reducing valve. The membrane use new material...

Miércoles 18 octubre 2017

Brief Introduction. DP17 Pilot Operated Pressure Reducing Valve, similar to Spirax Sarco Design, mainly used for steam system to reduce pressure, which is superior to normal piston type steam pressure reducing valve. This Pilot Operated Pressure Reducing Valve has another prominent features...

Miércoles 18 octubre 2017

Product Description: The Self Operated Temperature regulating valve is mainly applied in urban heating system and temperature regulating system of automatic control systems in other industries, which may be used for automatic control of temperature of all kinds of heating exchange...

Miércoles 18 octubre 2017

Self Operated Pressure regulating Valve Introduction GAZZC, GAZZV series self operated difference (little) Pressure Control Regulating valve Can be used in nominal pressure PN0.1 , PN10. The difference (little ) presses the regulation of segmenting. From 50mm.WC to 0.1MPa. self operated...

Miércoles 18 octubre 2017

Low Temperature Pneumatic Globe Control Valve / With Extended Stem Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve Disc, the unbalanced force is small, the permission...

Miércoles 18 octubre 2017

HCB Cage Type Double Seat Pneumatic Pressure Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure...

Miércoles 18 octubre 2017

HCN Low Noise Cage Type Regulating Valve is mainly designed for reducing the medium noise. As the gas will expand, many Symmetric holes were designed to reduce pressure drop. The flow port is S pattern, and the flow-guiding part around the cage can also make the fluid flow smoothly...

Miércoles 18 octubre 2017

1. HLC Small Size Single Seat Pneumatic Pressure Control Valve / Sleeve Type Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Miércoles 18 octubre 2017

Electric Three Way(3-way) Diverting Control Valve (GZDLX) Characteristics: Electric Three Way Control Valve includes Electric Three Way Mixing Control Valve (GZDLQ) and Electric Three Way Diverting Control Valve (GZDLX). Mixing Control Valve is mainly used to mix the medium from...

Miércoles 18 octubre 2017

Brief Introduction ZDLM Electric Actuated Sleeve Type Pressure Balanced Control Valve adopt Pressure Balanced Sleeve-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value...

Miércoles 18 octubre 2017

Brief Introduction ZDLP Electric Actuated Single Seat Globe Control Valve adopt top-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value. The Dis-guiding area is big....

Miércoles 18 octubre 2017

Pneumatic Three Way(3-way) Diverting Control Valve (GAZDLQ) Characteristics: Regulating valve for regulating media flow, pressure and liquid level.According to the opening of regulatory signals, automatic control valves, so as to achieve medium flow, pressure and level of regulation...

Martes 17 octubre 2017

C5126E Single Column Vertical Lathes 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5123E Single Column Vertical Lathes china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5120E Single Column Vertical Lathe china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Martes 17 octubre 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...