BONDED - 835 Anuncios

Viernes 14 mayo 2021

Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube/cubic blocks. The neodymium cube magnets are the strongest cube magnets, they are made from bigger neodymium magnet blocks by cutting...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic information of Manual Flow Balancing Valve This valve can adjust the flow easily and accurately, and effectively solve the problems of uneven heating and cooling and hydraulic imbalance in the pipe network system. download Dof960 series of cases Features of Manual Flow Balancing Valve 1...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic Information of Hydraulic Non-Slam Check Valve This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet effect. download Dof960 series of cases Features of Hydraulic Non-Slam Check Valve 1. Small fluid resistance, large flow; 2. Automatic control...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic information of High Pressure Shut-off Valve This valve is closed after the fire pump is started to cut off the domestic water and ensure the firefighting water. When the fire pump is closed, the valve automatically opens to cut off the firefighting water and restore the domestic...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic information of Foot Valve This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water source in the pump pipe. Dof960 series of cases Features of Foot Valve - Full pipe size flow area; 2. Lowest head loss; 3. 360°...

Miércoles 10 marzo 2021

Goodrich Ring Joint Gasket (Ring Type Joint Gaskets, RTJ Gaskets, RTJ flange, flange gasket Ring type joint) Goodrich Spiral Wound Gasket (SPW Gaskets) & Low-Stress Gasket Goodrich Metal Double Jacketed, Metal Single Jacketed Gaskets, Heat Exchanger Gaskets Kammprofile Gasket...

Miércoles 03 marzo 2021

Cantidad : more than - Precio : 3000-6500 euro per M

Description of Galvanized Steel Coils Hot-dip galvanized steel coils are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Galvanized steel coil with good raw materials and 7 times the cold rolling machine...

Sábado 27 febrero 2021

What is Cable Harness A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Martes 12 enero 2021

Cantidad : 1set - Precio : 5000USD-30000USD

What is insert molding? Insert molding refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified. Insert...

Sábado 09 enero 2021

Cantidad : 1set - Precio : 5000USD-30000USD

The plastic injection overmolding part is a process that can bond different materials by the injection molding. Over-molding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-shot. Knowledge of plastic...

Miércoles 06 enero 2021

Precio : 100USD

As a heat resistant tape manufacturer, Hopelight also offers BBQ grill mat. BBQ grill mat, also known as PTFE glass cloth or BBQ grill cooking sheet, uses high-quality glass fiber as the woven material, which is woven into a glass fiber cloth substrate by plain weave, twill weave...

Sábado 14 noviembre 2020

Precio : 10-30USD

What is the copper-bonded copperweld steel ground rod? Product Name: Copper coated copperweld steel ground rod Production process: electroplating / continuous electroforming Raw materials: Cold draw high quality mild steel Product type: one pointed, one flat, two threads (requires with a striker...)

Martes 20 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

SmFeN magnetic material uses abundant rare-earth Sm element instead of expensive elements of Nd, Dy, Co, etc, and is the most cost-effective rare earth permanent magnetic material. Compared with the bonded neodymium magnet, the bonded SmFeN magnet has higher magnetic properties and lower prices...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications. soft ferromagnetic are superior, it is helpful for the device to be small and lightweight...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

Magnets and magnet assemblies have to meet increasingly complex requirements. High density and metal plastic bonded magnets with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

By mixing different kinds of magnetic powder in different proportions, we can obtain a series of products called hybrid magnets, whose magnetic properties are higher than ferrite bonding magnet and lower than bonded ndfeb magnet, which can meet the customized application demands and...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

Compared to rare earth magnetic materials, bonded ferrite magnets have obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide as raw materials. In addition, ferrite has high stability and curie temperature, which makes it the most widely used permanent...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

Ferrite bonded magnetic compounds create a high-cost performance because ferrite magnet density is light and cost is low. Therefore, ferrite compound has the largest market demand and magnetic susceptibility for ferromagnetic materials are the most extensively used in the field of...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

As a professional neodymium permanent magnets supplier, we are familiar with ndfeb material properties, offering neodymium iron boron magnets for sale. Neodymium permanent magnets have / has high mechanical performance and no need for surface coating and other processes, which can...

Jueves 20 agosto 2020

POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplastic containing the functional group of a carbon bonded to two -OR groups. Other names of POM are Polyformaldehyde, Polymethylene glycol...

Jueves 20 agosto 2020

Cantidad : 100-100000

Product characteristics 1. LED colors: Red, Green, Yellow, White, Blue, Orange, Duo-colors LEDs 2. LED size：0603，0805，1206，020 3. LED brand： Kingbright, Every light 4. Little heat, low-cost, used for the outdoor environment Can be bonded into Polyester or FPC Our company provide custom...

Jueves 20 agosto 2020

Cantidad : 100-100000

What is Cable Harness A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Sábado 08 agosto 2020

Precio : US $1 - 3,000 / Set

Basic information of Backflow Preventers(Low Pressure) This valve can strictly prevent the occurrence of backflow pollution, is a safe device to ensure the hygiene of drinking water. Features of Backflow Preventers(Low Pressure) 1. More superior streamline design, energy - saving effect； 2...

Sábado 08 agosto 2020

Precio : US $1 - 3,000 / Set

Basic Information of Anti Water Hammer Valve This valve is used to reduce the pressure fluctuation caused by the sharp change in the flow rate when the pump is closed or stopped due to power failure, thus protecting the water pump system. Basic Information of Anti Water Hammer Valve...

Lunes 29 junio 2020

Cantidad : 200,000 pc - Precio : USD 150-600

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Ceramic Membrane JIUWU Ceramic Membrane Products...

Lunes 29 junio 2020

Cantidad : 1000tons - Precio : 100USD

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Sábado 20 junio 2020

Cantidad : 100-1,000, - Precio : customized

Eolane SCM is a professional OLED screen manufacturer. We provide a wide range of standard passive matrix OLED (PMOLED,Graphic OLED displays with board and oled display screen. Mechanical construction includes Chip on Board (COB), Chip on Glass (COG), and TAB (Tape Automated Bonded) types...)

Sábado 06 junio 2020

Cantidad : 500tons - Precio : USD0.015-----USD100

Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube/cubic blocks. The neodymium cube magnets are the strongest cube magnets, they are made from bigger neodymium magnet blocks by cutting...

Viernes 22 mayo 2020

Cantidad : 200,000 pc - Precio : USD 150- 600

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Their main characteristics of porous tubular ceramic...