POLYMERS - 2100 Anuncios

Jueves 26 octubre 2023

Its output power 150W with string self-powered, input voltage PV string DC power supply 500-1500VDC (wide voltage input), and output voltage 24VDC, which basically match all DC motors. Features: Matching 350W DC motor, and come with lithium battery. Advantages: string self-powered...

Jueves 26 octubre 2023

This type of the (tracking control unit)TCU works on Output power 150W with string self-powered, input voltage PV string DC power supply 500-1500VDC (wide voltage input), and output voltage 24VDC, which basically match all DC motors. Vertical single axis solar tracker Features: Matching...

Jueves 26 octubre 2023

The horizontal single axis solar tracker needs an external power supply, the input voltage is 380VAC (three-phase four restrictions) the output voltage is 380VAC, the product does not need to add components, and power generation input power is larger, to meet the larger power AC motor operation...

Jueves 26 octubre 2023

One axis solar tracker 24D02 works on an AC power supply with 350W output, which matches DC motors. One axis tracker's input voltage is between 90-264VAC and its output is 24VDC. Features: Matching power of 350W DC motor, it can carry heavy loads. Advantage: This kind of single axis...

Jueves 26 octubre 2023

Cantidad : 1 - Precio : 380,00 €

Paint protection film is a polyurethane film that contains anti-UV polymers, resists yellowing, and has super toughness. 1. Car body protection 2. Protect scratches and improve brightnessSelf Healing, UV PROOf, Sand Proof, anti scratch, Infrared proof Scratch-proof 3.1.52x15m(The...)

Jueves 26 octubre 2023

As an important material, enameled copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors...

Miércoles 25 octubre 2023

Cantidad : 30000 squa - Precio : 100-200RMB

custom industrial flooring is more resistant to the corrosion of dozens of chemical substances such as strong acids, alkalis, and oils than PVC flooring, while also being more wear-resistant, pressure resistant, and impact resistant. Industrial flooring is suitable for electronic...

Miércoles 25 octubre 2023

Cantidad : 30000 squa - Precio : 100-200RMB

Epoxy coil floor products using the most advanced technology and automation equipment production, product quality is stable, diversified varieties, and low carbon environmental protection. Compared with PVC floor, epoxy floor, etc., it has excellent performance, such as super pressure resistance...

Miércoles 25 octubre 2023

PPA masterbatch improves the surface lubrication of the material, which in turn leads to a reduction in processing temperatures and the occurrence of surface defects such as stripping. This can result in a more uniform and smoother film thickness. PPA Masterbatches increase surface lubrication...

Miércoles 25 octubre 2023

PP white masterbatch is a polymer additive that is specially designed for polypropylene resins. It is used to enhance the properties of polypropylene-based plastic products, such as color, UV resistance, flame retardance, and antimicrobial properties. pp color masterbatch is added...

Miércoles 25 octubre 2023

Polyethylene hdpe masterbatch is a type of polymer additive that is used to enhance the properties of polyethylene-based plastic products. It is added to the base polymer during processing to improve properties such as color, UV resistance, flame retardance, and antimicrobial properties...

Miércoles 25 octubre 2023

Fluorescent Whitening Masterbatch is a type of additive used in the plastic industry to improve the whiteness and brightness of plastic products. It is also known as Optical Brightening Agents (OBAs). Fluorescent whitening agents are designed to absorb light in the ultraviolet range...

Miércoles 25 octubre 2023

Non-woven masterbatch is a type of additive used in the production of non-woven fabrics. It is designed to improve the overall functionality, durability, and aesthetic appeal of non-woven materials. pp non woven masterbatch are typically made from a variety of thermoplastic polymers...

Miércoles 25 octubre 2023

Modified polyolefins are a group of materials with improved properties compared to regular polyolefins. These polymers are created by modifying the polymer structure through the addition of functional groups. acid modified polyolefin offer enhanced mechanical, thermal, and chemical...

Miércoles 25 octubre 2023

YG Tape's Hot Melt Adhesive series is a popular adhesive choice for a variety of applications. It's a prevalent choice for its easy application and fast drying time. Our hot melt adhesive is suitable for a large number of substrates and can be used for bonding a variety of materials...

Sábado 21 octubre 2023

Cantidad : 10mg-10t - Precio : 50-15000

Our arbomer 940 for sale is a white loose powder. carbomer cas number 9007-20-9 is widely used for its strong thickening properties, high transparency, high viscosity, strong suspension ability, short rheology and thixotropy, and low resistance to ionic shear force. Swelling and slightly acidic...

Sábado 21 octubre 2023

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. FAQs of Grade PF PEEK Powder Properties of Grade PF PEEK Pure Resin Fine Powder Polyetheretherketone...

Sábado 21 octubre 2023

With good toughness and impact resistance, Grade G peek pellets can be disinfected using steam, ethvi and rays, etc. You can see the wide uses of PEEK resin in the medical, pharmaceutical, and food processing industries. FAQs of Grade G PEEK Resin Pellets G Series-770G PEEK Pure Resin...

Jueves 12 octubre 2023

Precio : USD3000-4000

Hydroxyethylcellulose for Hair Hydroxyethyl cellulose for hair (HEC) is a common cellulose ether ingredient found in many hair care products, including shampoos, conditioners, and styling products. It is a water-soluble polymer that is derived from cellulose, which is a natural...

Jueves 12 octubre 2023

Precio : USD3000-4000

Paint grade CMC (Sodium Carboxymethyl Cellulose) is a type of cellulose ether that is commonly used as a thickener, stabilizer, and dispersant in paint formulations. CMC is a water-soluble polymer made by reacting cellulose with sodium hydroxide and monochloroacetic acid. Paint grade...

Martes 10 octubre 2023

The 20XX series precision ceramics syringe is self-developed by Keyto and its main function is to achieve achieve aspiration and dispensing with precise dosing. The syringe has a very high repeatability precision(CV) and accuracy of aspiration and dispensing. It is a high performance...

Lunes 09 octubre 2023

Types Of Plastic Injection Mold Polishing Introduction to theplastic injection mold polishing These days, industrial products are developing in the direction of product high quality as well as product diversification, in this way mold quality is going to have an influence on product...

Lunes 09 octubre 2023

Over molding of keyplast is a special plastic molding process. Overmolding custom injection molding is similar to the two-color molding or two-shot molding process. Over moulding can make the surface of the product full of softness and increase product functionality and added value...

Lunes 09 octubre 2023

Cantidad : 90000sqm/w - Precio : $6.2/sqm~ $10.5/sqm

SPC Wooden Flooring Stone plastic composite, solid polymer core, or SPC flooring, is a vinyl flooring material with a rigid core made of powdery limestone, PVC, and stabilizers. Sometimes, you might see it referred to as a "stone polymer composite floor." Wood SPC flooring is dense...

Lunes 09 octubre 2023

Cantidad : 90000sqm/w - Precio : $6.2/sqm~ $10.5/sqm

SPC Flooring Vinyl SPC stands for stone plastic composite or stone polymer composite. The mainly material is limestone and PVC which makes the flooring so incredibly durable. Because the vinyl content, it has a certain flexible on stable basis. Chongnuo SPC vinyl flooring, enjoy your life...

Lunes 09 octubre 2023

Stereo lithography Appearance (SLA) is a member of the vat photopolymerization family of processes for additive manufacturing. In Stereo lithography Appearance (SLA), UV lasers are used as the light source to selectively cure a polymer resin. RSPro Series The RSPro range of stereolithography...

Domingo 08 octubre 2023

Silicone Gel is not edible. Silicone is the old name of silicone. Later, because silicone is homonymous with tin or selenium, it was changed to silicone to distinguish it. In Taiwan and other Asian countries, silica gel is still called silica gel. Silica gel, also known as siloxanes...

Domingo 08 octubre 2023

Self-Adhesive LSR is a type of liquid silicone rubber specifically designed for applications where a permanent bond is required between two surfaces. It has a unique ability to bond to many different substrates, making it a popular choice for a variety of industries. Self-Adhesive...

Domingo 08 octubre 2023

At Betely, we are committed to providing superior quality products and service. Designed to withstanding high temperatures and resisting abrasion and corrosion, our products are safe and reliable, offering superior durability and performance. Our medical grade silicone rubber is...

Domingo 08 octubre 2023

Phenyl Silicone Oil is a type of silicone-based product that is used in a variety of products and industries. It is a clear, colorless liquid that is odorless and non-toxic. It has a low surface tension, high dielectric strength, and low volumetric expansion. It also has a high flash point...