DEVELOPMENT - 7141 Anuncios

Martes 14 abril 2020

Darshan Industries manufacturing of Dyestuffs & Pigments in India with offered best quality of Dyestuffs, basic dyes, Acid Dyes, Solvent Dyes, pigments at affordable prices. Darshan industries is manufacturer & exporter of dyestuffs. We manufacture acid, basic and solvent...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

The suck rod pumps can be sunk into wells in sequence as follows: barrel is run down to the setting depth on the tubing and then plunger with the standing valve on the rod string. For tubing of same diameter, tubing pumps are always of larger capacity than insert pumps. The tubing...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Non-rotating stabilizer(rubber sleeve stabilizer) is able to avoid blade wear and wall damage during. The non-rotating stabilizer consists of mandrel. Copper washer, rubber sleeve, spacer sleeve and self-locking lower sub. During drilling, the non-rotating stabilizer transfers the...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Mud pump parts are used on drilling rigs for the circulation of mud. These reciprocating pumps are suited for the process of drilling oil wells. We, at Saigao offer a wide selection of remanufactured, used and new drilling equipment for domestic and international drilling companies...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Key Seat wiper Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could move upward or downward and rotate freely on the mandrel, there are several spiral hard alloy blades welded on the sliding sleeve...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Features of Polished Bore Receptacle Liner Hanger High quality surface finish on the inner seal bore for optimum sealing property. The top end is chamfered for easy entry. Manufactured to strict roundness and wall thickness tolerances, giving optimum burst and collapse pressure ratings...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

BW1200/7 slurry pump is horizontal double cylinder reciprocating double action piston pump. The power has electric driving and diesel driving. It also can use hydraulic motor to drive. Customer can choose before ordering. It is applicable for 1500 meters water well drilling, core...

Martes 31 marzo 2020

Cantidad : 10000 Piec - Precio : 150-10000 USD

Three Blade Wings Drag Rock Drill Bit For soft formations Overview of Drag Bit Drag bit drilling is manufactured from forged high-quality alloy steel and hard alloy, plus state of art welding technology and multiple precision heat treatment to provide the highest rate and longest...

Martes 31 marzo 2020

Cantidad : 10000 Piec - Precio : 150-10000 USD

We, Cangzhou Great Drill Bits Co. Ltd., specialized in R&D, design, production, and sales various drill bits. The drill bits size from 3" to 26" , HDD Hole opener from 8``- 48`` , Such as PDC bit, Roller bit, Tricone bit, PDC Coring bit, Bi-center bits, Hole opener, etc. The Company...

Sábado 28 marzo 2020

The six section pump truck, as the name implies, is a product type of the pump truck. With the help of six steel arms, it creatively USES bionics technology to integrate the mechanism of human hand movement and insect foot movement into the design of concrete pump truck dimensions...

Sábado 28 marzo 2020

Cantidad : 100 - Precio : 17 000,00 €

Compared with two-section boom and three-section boom, four-section arms have more combination of folding modes. Concrete pumping equipment supplies used in construction are m-shaped, RZ-shaped R-shaped, Z-shaped and so on. RZ, a combination of two basic modes, which have both advantages...

Sábado 28 marzo 2020

Cantidad : 100 - Precio : 17 000,00 €

The comprehensive energy consumption of the pumping hydraulic system of the upgraded 56 meter concrete pump truck decreased by 4% year on year. Pumping control system efficiency increased by 5% ~ 8%. The vibration damping system of the arm frame reduces the vibration amplitude of...

Sábado 28 marzo 2020

Cantidad : 100 - Precio : 17 000,00 €

Let me introduce you zoomlion ZLJ5430THBB 52x-6rz concrete pump truck, a 52m concrete pump . Machine performance of 52m Concrete Pump Truck The concrete pump chassis of zoomlion ZLJ5430THBB 52x-6rz adopts noble German Benz chassis. Intelligent and safe distribution control: set...

Sábado 28 marzo 2020

Cantidad : 100 - Precio : 17 000,00 €

The 49-meter advanced concrete pumping is a kind of common construction vehicle, which is internationally advanced in key performances such as pumping efficiency, comprehensive fuel consumption and arm frame vibration. It is complicated to operate the 49m pump truck. It is necessary...

Sábado 28 marzo 2020

Cantidad : 100 - Precio : 17 000,00 €

The 46-meter concrete pump, also known as the small orthopaedic concretepumping, is always used in the construction of floor heating. It can be used in the construction of various projects in the south, the conveyance of refractory and thermal insulation materials and the construction...

Sábado 28 marzo 2020

Cantidad : 100 - Precio : 17 000,00 €

38 meter concrete pump truck is common in many construction sites. Before, the houses were transported by manpower. Now there are 38m concrete pump truck, which not only saves manpower, but also speeds up the construction progress. Today let me tell you something about the 38 meter...

Sábado 28 marzo 2020

Cantidad : 100 - Precio : 17 000,00 €

The equipt concrete is an excellent medium and short arm pump truck, which is made after HBT towing pump, HBC on-board pump and HGY hydraulic concrete dispenser. It is a high-efficiency, integrating running, pumping and cloth. At present, some advanced manufacturers have begun to...

Lunes 23 marzo 2020

Advantages of flash column FLASH chromatography is used for preparation and has the following advantages: 1. Fast speed, generally 1/8 of the separation time of open column chromatography, saving time, slow sample change and decomposition 2. Large preparation volume, at least as compared...

Sábado 21 marzo 2020

Cantidad : 1 - Precio : USD18000-28000

From the evolution of human beings, we have experienced the process of walking on all fours to walking upright. After the investigation of the development history of furniture in the world by researchers, we found that sitting down in daily activities is conducive to reducing fatigue...

Sábado 21 marzo 2020

Cantidad : 1 - Precio : USD18000-28000

When you understand the functions of the lift standing desk, and the benefits of using the lift standing desk. We Shared how to choose a good lift standing desk, through which aspects to identify the advantages and disadvantages of lift standing desk frame. Finally, we need to share...

Viernes 20 marzo 2020

Permanent magnetic materials, also known as hard magnetic materials, are materials that still have magnetism after the magnetization field is removed. Soft magnetic materials have strong magnetic induction strength when the magnetization field exists, and lose magnetism when the magnetization...

Viernes 20 marzo 2020

We have magnetic materials for sale! Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize...

Viernes 20 marzo 2020

Cantidad : 30,000 sti - Precio : 1USD—100USD

Sandvik bioline Description LZQ is an OEM factory for all kinds of medical tools, such as Guide Drill P108, Profile Drill P144, Parallel Pin P37, Drill Key P47, Lance Drill P172, Kirschner Wires P178, ect. We can produce a whole kit of tools for customers'surgical cases. Product...

Viernes 20 marzo 2020

Precio : 200 000,00 €

As the performance and quality of displays increase, so does the demand for test instrumentation standards. In addition, with the rapid development of some other types of illuminated elements, for example, Organic EL as well as conventional LCD and PDP displays, there is a requirement...

Jueves 19 marzo 2020

What is Sheet Metal Processing? Sheet metal process services or sheet metal fabrication includes: folding, shearing, punching, welding, riveting, splicing and other processes. In general, the process of forming a sheet by hand or mechanical is called sheet metal processing. Sheet...

Jueves 19 marzo 2020

What is Reverse Engineering? Reverse engineering China is to obtain the point cloud data of the physical model by using the three-dimensional digital scanning of the existing physical model in the case that the design drawings are incomplete or even without the design drawings or CAD models...

Jueves 19 marzo 2020

What is China rapid prototyping? plastic prototype service is a kind of professional manufacturing technology that is used to produce high-quality entity models of three-dimensional designs. Prototypes are useful for design improvements and can be used as stepping stones for comprehensive...

Jueves 19 marzo 2020

What is a Mold? In industrial production, various types of presses and special tools mounted on the press are used to produce metal or non-metal materials into parts or articles of the desired shape by pressure. This special tool is collectively referred to as a mold, and the material...

Martes 17 marzo 2020

Cantidad : 1000 - Precio : 0.5-50usd

Car charger is an accessory for car owners to charge digital products anytime and anywhere with car charger source.Some high-end car chargers generally include two USB ports, which can charge two digital products at the same time.Such products generally have overload protection, short...

Martes 17 marzo 2020

Cantidad : 1000 - Precio : 0.5-50usd

K123 Keytech's Data line categories mainly include: Apple lightning USB Cable , Type C USB Cable. All the data lines are made of imported wire, with the latest technology, and have passed strict ex-factory tests. Support high speed data transmission and quick charging function. Do...