FLUX - 1078 Anuncios

Sábado 27 febrero 2021

Cantidad : 3000000PCS - Precio : USD0.015-USD0.50

As a flux for casting. Broken glass can be used as a flux for the melting of cast steel and cast copper alloy to cover the melt and prevent oxidation. Transformational utilization is a method of recycling which needs to be developed urgently. In the future, there will be many new...

Viernes 05 febrero 2021

Advantage of Welding Small Processing Conditions Sheet welding is not affected by the magnetic field (arc welding and electron beam welding are easy), and can accurately align the element. Two kinds of metals with different physical properties (such as different resistances) can be...

Domingo 24 enero 2021

Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high...

Domingo 10 enero 2021

Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be...

Domingo 10 enero 2021

There are two main types of ball studs: one is a combination of a spherical pin and an integral ball seat, and the other is a combination of a hemispherical ball pin and a spherical member. In the past, coil springs were used for preloading and compensating for wear. Nowadays, synthetic...

Domingo 10 enero 2021

GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algorithm, the wire rope NDT tester detection ability of micro-crack is as high as 0.05mm deep crack. Using computer digital technology and "digital...

Domingo 10 enero 2021

ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. We can use different coils according to the shape of...

Domingo 10 enero 2021

NDT Application in Automotive Industry: Eddy current testing NDT echnology has been widely used in the detection of metal components in the automotive and aerospace industry. In order to ensure the flight safety of the aircraft, the relevant components must be periodically inspected...

Domingo 10 enero 2021

Precio : 10-30USD

The most superior performance of copper-clad flat steel is the increased grounding surface area, which has improved the electrical conductivity of the horizontal grounding body, thus saving grounding materials. Copperweld Bar-6 Meter Production Process Copper-clad flat steel is produced...

Sábado 14 noviembre 2020

Precio : 10-30USD

Exothermic Welding Exothermic welding, also called hot melt welding, fire-clay welding, thermite welding and explosion welding, is a high-heat principle that utilizes the redox reaction between metals, the operation of which is simple, easy to learn, safe and efficient, and it has...

Sábado 14 noviembre 2020

Precio : 10-30USD

The most superior performance of copper-clad flat steel is the increased grounding surface area, which has improved the electrical conductivity of the horizontal grounding body, thus saving grounding materials. Copperweld Bar-6 Meter Production Process Copper-clad flat steel is produced...

Sábado 24 octubre 2020

Cantidad : 1000 - Precio : usd26

Cuello de ganso flexible LED de la lampara LED de trabajo de la maquina Maquina CNC LED Light / Machine Tools Light / laser maquina de luz LED Model Power(W) Rated current Voltage CCT ONN-M3S-B1 5 190mA 24V 6000-6500K ONN-M3S-B2 5 190mA 24V 4000-4500K ONN-M3S-B3 5...

Sábado 17 octubre 2020

Precio : de 1 $ à 20 $ par pi

Description du produit: Une lance thermique, une lance thermique, une lance à oxygène ou une barre de combustion est un outil qui chauffe et fait fondre le fer en présence d'oxygène pressurisé pour créer les températures très élevées requises pour la coupe. Il se compose d'un long...

Sábado 17 octubre 2020

Precio : de 1 $ à 20 $ par pi

Description du produit: Les tuyaux enduits de céramique sont fabriqués en appliquant un revêtement réfractaire spécial à l'intérieur et à l'extérieur du tuyau en acier doux. Selon l'alésage normal du tuyau, un ou deux manteaux réfractaires sont appliqués à l'intérieur du tuyau. À l'extérieur...

Viernes 16 octubre 2020

Precio : $1-$20/Piece

Description du produit: Les tuyaux enduits de céramique sont fabriqués en appliquant un revêtement réfractaire spécial à l'intérieur et à l'extérieur du tuyau en acier doux. Selon l'alésage normal du tuyau, un ou deux manteaux réfractaires sont appliqués à l'intérieur du tuyau. À l'extérieur...

Viernes 16 octubre 2020

Precio : $1-$20/Piece

Description du produit: La lance à oxygène calorisée est composée de 5 couches. Au cœur se trouve un acier doux de haute qualité, et dans les deux surfaces intérieures et extérieures de l'acier doux sont donnés un traitement de calorisation qui était sous haute température dans laquelle...

Domingo 11 octubre 2020

Cantidad : 200 units, - Precio : $60~$20,000

Smoothing circuit, efficient from IGBT motor drives, so as to extending service life of electric motors. Reduce motor noise and eddy loss. Reduce the leakage current resulted from the output of high harmonic. Protect the electronic power switch within the inverters. It is installed...

Jueves 01 octubre 2020

Cantidad : 10,000 met - Precio : 1.2USD per meter

Features 1. TOP SMD5050+2835 chip, high brightness, wide beam angle, low decay. 2. Easy to install for any bending 3. Low power consumption, long life span, free maintenance 4. Working temperature: -40℃-50℃ 5. Storage temperature: -50℃-60℃ 6. Certification: ETL/CE/RoHS/IEC Application 1...

Jueves 01 octubre 2020

Cantidad : 10,000 met - Precio : 1.2USD per meter

Welcome for your visit to our website. Established in 2010, Hanron has become a Leading led strip light manufacturer in China. By offering more than 2000 type of led strip, we've cooperated with 500+ customers in 78 countries. Features 1. TOP SMD3528 RGB chip, high brightness, wide beam angle...

Jueves 01 octubre 2020

Cantidad : 10,000 met - Precio : 1.2USD per meter

Welcome for your visit to our website. Established in 2010, Hanron has become a Leading led strip light manufacturer in China. By offering more than 2000 type of led strip, we've cooperated with 500+ customers in 78 countries. Features 1. TOP SMD5050 RGB chip, high brightness, wide beam angle...

Jueves 01 octubre 2020

Cantidad : 1.2USD per - Precio : 10,000 meters per da

Features 1. TOP SMD5050 chip, high brightness, wide beam angle, low decay. 2. Easy to install for any bending 3. Low power consumption, long life span, free maintenance 4. Working temperature: -40℃-50℃ 5. Storage temperature: -50℃-60℃ 6. Certification: ETL/CE/RoHS/IEC Application 1...

Viernes 11 septiembre 2020

Precio : 80000-2000000usd

Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects on the surface or near-surface of the test piece. People can detect defects by detecting the change of leakage magnetic field with MFL...

Viernes 11 septiembre 2020

Precio : 80000-2000000usd

Tubing repair is an important measure to reduce the comprehensive cost of production in oil production plants to improve the quality of repairing tubing. It can ensure the quality of oil and water wells to prolong the inspection cycle, reduce the rework of operations and reduce operating costs...

Sábado 29 agosto 2020

Precio : 1 000,00 €

KE300X mini Frequency inverters are designed for common applications of small power OEM market, with various functions of PID, multistage speed, DC braking, Modbus communication and others. Its smaller size can further reduce the installation space (the size is about 15% smaller than...)

Sábado 29 agosto 2020

With the world-leading sensorless current vector control technology (SVC) for synchronous motor, KE300F can accurately identify the motor parameters, dynamically estimate the rotor speed and pole position, and can easily drive all types of permanent magnet synchronous motors (SPM & IPM)...

Sábado 29 agosto 2020

Precio : 1 000,00 €

KE300A Series High Performance Open Loop Vector Control inverter widely used for the asynchronous motor driving where better speed control and low-frequency torque are required . KE300A is built on TI's powerful DSP-based motor control chip, with the adoption of the sensorless current...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

Sintered Neodymium Magnets Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product...

Jueves 20 agosto 2020

Cantidad : 20000 - Precio : 50000$

Diferentes Sombreros Figurativos En la cocina, la mayoría de los chefs usan varios sombreros figurativos diferentes, que alternan fácilmente entre revolver, picar y otras tareas de cocina. Eso es porque el sombrero que lleva un chef dice mucho sobre quiénes son, su estilo, su nivel...

Miércoles 19 agosto 2020

Hot air solder leveling of hasl pcb, which is a process of coating molten tin-lead solder on the surface of the PCB and leveling (blow-out) with heated compressed air to form a coating layer that is resistant to copper oxidation and provides good solderability. Hot air leveling is...

Sábado 11 julio 2020

Contact : Sandy Lin Email: unity@mvme.cn Mob/Whatsapp : + 86 18020776786 Tel : +86 592 5165503 Skype: onlywnn_1 Wechat : mooreplc website : www.salesplc.com BENEFITS (I WILL GIVE YOU A REPLY IMMEDIATELY) Quantity available: 1 The colour：NEW、Used 、 refurbished Warranty: 12 months...