MECHANICAL - 7546 Anuncios

Jueves 12 octubre 2017

OPTOSTAR OP-V105 Caja de unión de fibra óptica Caja de junta al aire libre Cierre de empalme de fibra óptica impermeable Visión de conjunto - OPTOSTAR OP-V105 proporciona con 6 puertos redondos de entrada de cable de fibra y el diámetro del cable es de Ф7-Ф18. Se aplica extensamente...

Jueves 12 octubre 2017

OPTOSTAR OP-V105 Caja de unión de fibra óptica Caja de junta al aire libre Cierre de empalme de fibra óptica impermeable Visión de conjunto - OPTOSTAR OP-V105 proporciona con 6 puertos redondos de entrada de cable de fibra y el diámetro del cable es de Ф7-Ф18. Se aplica extensamente...

Jueves 12 octubre 2017

Adaptateur Optique OPTOSTAR Adaptateur Optique SC-SC Adaptateur Optique SC-SC caractéristiques du produit - Faible perte d'insertion, perte de retour élevée - Bonne compatibilité - Haute précision des dimensions mécaniques - Haute fiabilité et stabilité - PC, APC, UPC optionnel...

Jueves 12 octubre 2017

Adaptateur Optique OPTOSTAR Adaptateur Optique SC-SC Adaptateur Optique SC-SC caractéristiques du produit - Faible perte d'insertion, perte de retour élevée - Bonne compatibilité - Haute précision des dimensions mécaniques - Haute fiabilité et stabilité - PC, APC, UPC optionnel...

Jueves 12 octubre 2017

OPTOSTAR Adaptador óptico Conector de fibra SC Conector SC-SC Adaptador óptico Características del producto Baja pérdida de inserción, alta pérdida de retorno Buena compatibilidad Alta precisión de las dimensiones mecánicas Alta confiabilidad y estabilidad PC, APC, UPC opcional Solicitud...

Jueves 12 octubre 2017

OPTOSTAR Adaptador óptico Conector de fibra SC Conector SC-SC Adaptador óptico Características del producto Baja pérdida de inserción, alta pérdida de retorno Buena compatibilidad Alta precisión de las dimensiones mecánicas Alta confiabilidad y estabilidad PC, APC, UPC opcional Solicitud...

Martes 10 octubre 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Miércoles 27 septiembre 2017

Cantidad : 10 - Precio : USD 100/ set

Hotel intelligent door lock mifare 1 card electrical door lock Parameters Power Supply DC4.5-6.5V Static Current < 20μA Dynamic Current <120mA</td> Store Temperature -20~+80℃ Store Humidity 10~90% RH Working Temperature -10~+60℃ Working Humidity 15~90% RH Working...

Miércoles 27 septiembre 2017

Production of high-quality organic granular fertilizer is a complex task as the process is subject to various factors: variety and quality of raw materials, composition and compatibility of material formulation, moisture content and its variation during the granulation process, quality...

Martes 26 septiembre 2017

Building Materials Hot Dip Galvanized Steel Pipe Price For Greenhouse Diameter：21.3mm-219.1mm W.T：0.8-30mm Test：Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection Steel Grade：Q235---Grade D, SS400, S235JR, S235JO, S235J2 Ubicación : No...

Martes 26 septiembre 2017

Galvanized pipe tubing for scaffolding,galvanized scaffold pipe Diameter：21.3mm-219.1mm W.T：0.8-30mm Test：Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection Steel Grade：Q235---Grade D, SS400, S235JR, S235JO, S235J2 Ubicación : No. 260...

Martes 26 septiembre 2017

Galvanized rectangular hollow section cold rolled metal steel tubing Diameter：21.3mm-219.1mm W.T：0.8-30mm Test：Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection Steel Grade：Q235---Grade D, SS400, S235JR, S235JO, S235J2 Ubicación : No...

Martes 26 septiembre 2017

Cantidad : 1Ton - Precio : USD559

2 inch steel pipe / greenhouse pipe / pre galvanized metal round tubing Diameter：21.3mm-219.1mm W.T：0.8-30mm Test：Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection Steel Grade：Q235---Grade D, SS400, S235JR, S235JO, S235J2 Ubicación : No...

Sábado 23 septiembre 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Martes 19 septiembre 2017

Cantidad : 50kg - Precio : USD2.0/kg

Product Description: The product description as follows: 300 400 Series HOT Selling Stainless steel wire for standard parts with 0.8 to 5.0mm diameter Grade 304,304L,308,316,316L,321,410,430 Standard ASTM, EN,DIN,JIS Diameter 0.8mm--5.0mm Type cold heading, soft Packing...

Sábado 16 septiembre 2017

Cantidad : 50kg - Precio : USD2.0/kg

Specifications 1.Wire gauge 0.11mm to 16mm 2.surface finish: bright,matt ,electrolysis bright 3.grade: 200,300.400 600(631)seriers 4.Ni wire 1)Supplying good elongation generatrix for other manufactures of filament drawing, 2)to producing fine spring wire.acupuncture wire and pressed wire,etc...

Viernes 15 septiembre 2017

Application This machine is applied to recover and purify various high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil, industrial oil, mineral oil and so on. The purifier can fast degas, dewater, and remove the impurity and...

Viernes 15 septiembre 2017

Application The machine is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water...

Viernes 15 septiembre 2017

Application The machine is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water...

Jueves 14 septiembre 2017

Description 1. The WC67K NC Hydraulic Press Brake-E21 design meets EU international standards. The fuselage eliminates internal stress by annealing and ensures higher precision and strength. All NC hydraulic plate bending machines are designed using SOLID WORKS 3D programming and...

Jueves 14 septiembre 2017

Description 1. This CNC hydraulic metal sheet press bender machine compliance with EU standards. The frame of this bender machine eliminates internal stress by annealing and ensures high precision and strength.All products are designed using SOLID WORKS 3D programming and made with...

Jueves 14 septiembre 2017

Description 1. The design meets EU international standards.The fuselage eliminates internal stress by annealing and ensures higher precision and strength All machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel with the latest technology...

Jueves 14 septiembre 2017

The hydraulic shearing machine is a machine use a blade against to another blade to act vertical movement. It is use the movable upper blade and the fixed blade, which through the reasonable blade gap to apply shear force to the metal sheet of various thicknesses, so that the plates...

Jueves 14 septiembre 2017

- Description - cnc Hydraulic Press Brake machine belong to the universal machine tools, mainly used for metal sheet and plate bending, by both sides is two pieces of C type steel plate and work table with horizontal beam assembly into a three-dimensional structure. The slider suspension...

Jueves 14 septiembre 2017

Brief Introduction The main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of standard test cloth surface of the material / coating to angle standards for automatic circulating friction. Test conditions can be customized...

Miércoles 13 septiembre 2017

soude caustique flocons nous sommes des professionnels en chine, fabrication de soude caustique. le numéro de série d'items de tests résultat standard 1 l'apparence solide blanc 2) 99,16% 99% min 3 na2co3 0,90% max 0,62% 4 nacl 0,15% max 0,04% 5 fe2o3 0,01% max 0005% caractéristiques...

Martes 12 septiembre 2017

Bally Type Flexometer 6-12-24 Working Places Standards: EN ISO 20344: 6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351 Dauer-Faltverhalten, UNE/I.U.P.20 Ensayos de resistencia a la flexion continuada Applications： The Bally flexometer is the internationally-accepted method for the...

Miércoles 06 septiembre 2017

Seam Fatigue Tester Testing Standards Toyota TSL5101G Section 3.7,GMW 3405,Nissan M-0154,Ford Motor Co. BN 106-02,TSL5100G Section 4.22 Applications: The Seam Fatigue Tester is a two station bench top machine, used for evaluating fabric or leather seating materials resistance to...

Miércoles 06 septiembre 2017

Cold Fold Tester ---Chrysler Standards: LP-463-KB-28-01 Method A Applications: This Cold Fold Tester is applied to the cold fold test based on Chrysler method and designed to measure the resistance to cold cracking of the soft trim materials. Product Information: The Cold Fold Tester...

Miércoles 06 septiembre 2017

Perspiration Tester Testing Standards: ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714 Applications: The Perspiration Tester is designed for color fastness test to perspiration, sea water, saliva...