RESINS - 4370 Anuncios

Viernes 03 noviembre 2023

SiSiB® PC6120, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radical mechanisms - copolymerization...

Viernes 03 noviembre 2023

SiSiB® PC5962 is an alkylalkoxysilane. Technical Data CAS No. 18166 37 5 EINECS No. N.A. Formula C12H28O3Si Molecular Weight 248.43 Boiling Point 202°C [760mmHg] Flash Point 85 °C Color and Appearance Colorless clear liquid Density 25/25°C 0.88 Refractive Index 1...

Viernes 03 noviembre 2023

SiSiB® PC5961 is an alkylalkoxysilane. Technical Data CAS No. 3069 19 0 EINECS No. 221-331-9 Formula C9H22O3Si Molecular Weight 206.35 Boiling Point 203 °C [760mmHg] Flash Point 62 °C Color and Appearance Colorless clear liquid Density 25/25°C 0.92 Refractive Index 1...

Jueves 02 noviembre 2023

Block magnets can be called as magnet blocks, rectangle magnets, rectangular magnets and square magnets. Neodymium block magnets are made from bigger NdFeB magnets blocks by cutting processing. Rectangular neodymium magnets or neodymium square magnets are expressed by length, width, and height...

Jueves 02 noviembre 2023

UV curing repair technology is the most effective and fast solution for pipe rehabilitation. Because of its high efficiency and low cost, UV curing repair technology is now widely used in the pipe rehabilitation industry. As one of the professional pipe rehabilitation companies in China...

Jueves 02 noviembre 2023

HK36 and HK53 small plastic twin-screw extruders are very competitive equipment models for small batch production scale, especially for the Color Masterbatch industry. The production of masterbatch has strict requirements on equipment and process. The accurately measured powder and...

Miércoles 01 noviembre 2023

Precio : USD 1.5-6.0 / kgs

Red transparent film is made from special raw materials and complex processing technology. In addition to good chemical properties. Red PET film refers to a type of polyester film that is colored red. This film is widely used in different industries due to its vibrant, bold color...

Miércoles 01 noviembre 2023

Precio : ¥20-1000w

DSXL devolatilization technology improves product quality and reduces cost. Technology Introduction of Devolatilizer Based on the characteristics of polymer and the rich application experience of static mixer and high-efficiency heat exchanger, DODGEN has designed single-stage or...

Miércoles 01 noviembre 2023

Precio : ¥20-1000w

DSXL devolatilization technology improves product quality and reduces cost. Devolatilization Technology Introduction Based on the characteristics of polymer and the rich application experience of static mixer and high-efficiency heat exchanger, Dodgen has designed single-stage or...

Viernes 27 octubre 2023

Category： Linear Guide Rails High rigidity and high load Equal load in four directions Equipped with automatic centering ability Fully sealed dust prevention system High positioning accuracy and good reproducibility Low dust generation Excellent walking smoothness High speed and low...

Jueves 26 octubre 2023

Metal Wall Decor Wholesale Supplier Janmart door china metal wall decor is a complete transformation because metal art creates volume and lighting effects. Decorated in this way, this wall already has the status of a gallery wall. The advantage of metal wall decoration is that it...

Jueves 26 octubre 2023

Craft Decoration Items Wholesale Supplier Welcome to the JANMART DECOR craft world, here You can create Features! Find many wonderful ideas of craft decoration items. Handicrafts, each small detail is the craftsmanship of the master worker, exquisite and delicate Open home, choose...

Jueves 26 octubre 2023

Precio : USD900-USD2000/MT

Classification of High Melting Point Polypropylene Wax Products: Plastic Additives Product Description: This product has the characteristics of high melting point, low melting degree, good lubricity, and dispersion. It is an excellent additive for polyolefin processing at present...

Jueves 26 octubre 2023

Precio : USD900-USD2000/MT

Lubricants improve the fluidity and demoulding of the resin. In processing, it reduces friction between resin and processing machinery, the friction between resin and resin, so that it reduces the torque to save the energy. Lubricants also increase the surface smoothness of the finished...

Jueves 26 octubre 2023

As an important material, enameled copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors...

Jueves 26 octubre 2023

Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products. As a leading expert in this technology...

Miércoles 25 octubre 2023

Cantidad : 30000 squa - Precio : 100-200RMB

custom industrial flooring is more resistant to the corrosion of dozens of chemical substances such as strong acids, alkalis, and oils than PVC flooring, while also being more wear-resistant, pressure resistant, and impact resistant. Industrial flooring is suitable for electronic...

Miércoles 25 octubre 2023

Cantidad : 30000 squa - Precio : 100-200RMB

Epoxy coil floor products using the most advanced technology and automation equipment production, product quality is stable, diversified varieties, and low carbon environmental protection. Compared with PVC floor, epoxy floor, etc., it has excellent performance, such as super pressure resistance...

Miércoles 25 octubre 2023

PP white masterbatch is a polymer additive that is specially designed for polypropylene resins. It is used to enhance the properties of polypropylene-based plastic products, such as color, UV resistance, flame retardance, and antimicrobial properties. pp color masterbatch is added...

Miércoles 25 octubre 2023

Polyethylene hdpe masterbatch is a type of polymer additive that is used to enhance the properties of polyethylene-based plastic products. It is added to the base polymer during processing to improve properties such as color, UV resistance, flame retardance, and antimicrobial properties...

Miércoles 25 octubre 2023

Fluorescent Whitening Masterbatch is a type of additive used in the plastic industry to improve the whiteness and brightness of plastic products. It is also known as Optical Brightening Agents (OBAs). Fluorescent whitening agents are designed to absorb light in the ultraviolet range...

Miércoles 25 octubre 2023

Nucleating Masterbatch usingα-type nucleating agents can accelerate the crystallization rate of polypropylene (PP) and significantly enhance the rigidity and heat resistance of the resulting thermoplastic products. This prevents softening during boiling water heating and ensures...

Miércoles 25 octubre 2023

Non-woven masterbatch is a type of additive used in the production of non-woven fabrics. It is designed to improve the overall functionality, durability, and aesthetic appeal of non-woven materials. pp non woven masterbatch are typically made from a variety of thermoplastic polymers...

Miércoles 25 octubre 2023

Modified polyolefins are a group of materials with improved properties compared to regular polyolefins. These polymers are created by modifying the polymer structure through the addition of functional groups. acid modified polyolefin offer enhanced mechanical, thermal, and chemical...

Miércoles 25 octubre 2023

YG Tape's Hot Melt Adhesive series is a popular adhesive choice for a variety of applications. It's a prevalent choice for its easy application and fast drying time. Our hot melt adhesive is suitable for a large number of substrates and can be used for bonding a variety of materials...

Sábado 21 octubre 2023

Cantidad : 10mg-10t - Precio : 50-15000

Our arbomer 940 for sale is a white loose powder. carbomer cas number 9007-20-9 is widely used for its strong thickening properties, high transparency, high viscosity, strong suspension ability, short rheology and thixotropy, and low resistance to ionic shear force. Swelling and slightly acidic...

Sábado 21 octubre 2023

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. FAQs of Grade PF PEEK Powder Properties of Grade PF PEEK Pure Resin Fine Powder Polyetheretherketone...

Sábado 21 octubre 2023

With good toughness and impact resistance, Grade G peek pellets can be disinfected using steam, ethvi and rays, etc. You can see the wide uses of PEEK resin in the medical, pharmaceutical, and food processing industries. FAQs of Grade G PEEK Resin Pellets G Series-770G PEEK Pure Resin...

Sábado 21 octubre 2023

PEEK-GL series, is a glass fiber composite modified PEEK materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. FAQs of Grade GL...

Sábado 21 octubre 2023

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. FAQs of Grade FC Super Wear Resistant PEEK PEEK wear resistance of Grade FC Super Wear Resistant PEEK PEEK (polyetheretherketone) materials...