MICROSCOPES - 419 Anuncios

Jueves 02 noviembre 2023

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

Suitable for ITO, particle detection, wafer inspection Infinity optical design for different microscope lenses can match infinity objective lens with a different mag High-contrast & brightness image solution Microscope objective design of new modular allows customizing different...

Miércoles 01 noviembre 2023

Cantidad : 6tons

Medikament provides high-quality malaria test kit for sale. The malaria rapid test kit contains a membrane strip, which is pre-coated with two monoclonal antibodiesas two separate lines across a test strip. One monoclonal antibody (test line 1) is specific to the P. falciparum histidine...

Miércoles 01 noviembre 2023

Cantidad : 6tons

Hepatitis C Virus (HCV) is a small, enveloped, positive-sense, single-stranded RNA Virus. HCV is now known to be the major cause of parenterally transmitted non-A, non-B hepatitis. HCV rapid test kits diagnostic method is commonly used now. Antibody to HCV is found in over 80% of...

Viernes 13 octubre 2023

Cantidad : 200 tons - Precio : 25usd-100usd

HSG METAL is a professional tungsten rod manufacturer and tungsten rod factory in China. Pure tungsten rod is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min....

Miércoles 06 septiembre 2023

Product description WELDING NECK RISE FACE FLANGE（WNRF） Stainless steel weld neck flange are popularly used in excessive stress applications, with their capability to provide assisting power along with stress distribution. raised face weld neck flange are circumferentially welded...

Miércoles 06 septiembre 2023

Product description Socket welded flange is a flange with one end welded with steel tube and the other end connected with bolts. It is suitable for connecting pipe with small diameter, high pressure and high temperature, usually used in the pipelines with PN≤ 10.0mpa and DN≤40. Socket...

Miércoles 30 agosto 2023

Modal is a kind of regenerated cellulose fiber, made from European beech (beech- wood pulp- process to fiber), the modal fabric basic all is a natural material, no harm to the human body, eco-friendly, widely used in people's underclothes, modal fiber dry strength close to the polyester...

Jueves 24 agosto 2023

The human immunodeficiency virus, also known as HIV, is a retrovirus that causes human cellular immune system defects. The virus attacks and gradually destroys the human immune system, leading to pathogenic bacteria and rare tumors, with fast infection and a high fatality rate....

Sábado 22 julio 2023

Cantidad : 1-100000pc - Precio : 0.01-1000USD

CNC Milling CNC milling processing is suitable for precision and complex parts processing, periodically repeated production parts processing, multi-station, multi-process concentrated part processing. The main processing objects are box parts, complex curved parts, special-shaped parts and discs...

Martes 04 julio 2023

Cantidad : 10-1000000 - Precio : 1usd-10000usd

Borosilicate is the alternative for borofloat 33 (BF33). Therefore, this kind of glass is called high borosilicate glass. Our Borosilicate window has high transmittance in the visible and near-infrared regions, making it ideal for a wide range of optical applications. It boasts a...

Martes 04 julio 2023

Cantidad : 10-1000000 - Precio : 1usd-10000usd

At TC Optik, we are proud to offer high-quality BK7 window that are manufactured to the highest standards of precision and quality. Our bk7 optical windows are made from high-quality borosilicate optical glass with exceptional optical transmission characteristics, and are ideal for...

Miércoles 31 mayo 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Custom Milled Aluminum, Custom Machined Aluminum Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 51mm*46mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Customized Precision Aluminum...

Martes 30 mayo 2023

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

Suitable for ITO, particle detection, wafer inspection Infinity optical design for different microscope lenses can match infinity objective lens with a different mag High-contrast & brightness image solution Microscope objective design of new modular allows customizing different...

Viernes 26 mayo 2023

Cantidad : 100

Les enfants peuvent recréer une journée parfaite à l'école de Heartlake City (41682). Dans ce bâtiment magnifique, les enfants peuvent recréer une journée d'école, passer du temps avec leurs amis, assister à leurs cours préférés et jouer le rôle de la professeure. Comme une vraie...

Jueves 18 mayo 2023

Product description Blind flange is also called blind board, and its proper name is flange cover. It is a flange without holes in the middle for sealing the pipe plug. There are many types of sealing surface, such as rise face, ring joint face, large or smalltongue face and groove face...

Viernes 12 mayo 2023

Innovative digital microscope are microscopes without eyepieces. A digital camera acts as a detector. Images are displayed on a screen or monitor, turning the microscopy workstation into an ergonomic digital workplace. This innovative digital microscope can be used in PCB boards, hardware...

Viernes 05 mayo 2023

Medikament provides high-quality malaria test kit for sale. The malaria rapid test kit contains a membrane strip, which is pre-coated with two monoclonal antibodiesas two separate lines across a test strip. One monoclonal antibody (test line 1) is specific to the P. falciparum histidine...

Viernes 05 mayo 2023

Hepatitis C Virus (HCV) is a small, enveloped, positive-sense, single-stranded RNA Virus. HCV is now known to be the major cause of parenterally transmitted non-A, non-B hepatitis. HCV rapid test kits diagnostic method is commonly used now. Antibody to HCV is found in over 80% of...

Jueves 27 abril 2023

Precio : 30--45 dollars

While floating through the molten tin, the combination of gravity and surface tension results in smooth and flat surfaces on both sides. a) Smooth and flat surface and good vision. b) Excellent optical performance. c) Stable chemical properties. d) Resistant to acid, alkaline, and corrosion...

Jueves 27 abril 2023

Precio : 30--45 dollars

Boro Glass for Sale Borosilicate is the alternative for borofloat 33 (BF33). Therefore, this kind of glass is called high borosilicate glass. Our Borosilicate window has high transmittance in the visible and near-infrared regions, making it ideal for a wide range of optical applications...

Jueves 27 abril 2023

Precio : 30--45 dollars

At TC Optik, we are proud to offer high-quality BK7 windows that are manufactured to the highest standards of precision and quality. Our BK7 fused silica windows are made from high-quality borosilicate optical glass with exceptional optical transmission characteristics, and are ideal...

Viernes 07 abril 2023

Custom Optical Prisms Micro Prisms, Rhomboid Prisms, Penta Prisms, PBS, Custom Coating Hyperion Optics supplies a range of pellin broca prism to meet UV-Visible-NIR applications, with high surface quality and tight tolerance angles. Our materials selection ranges from flint/crown glasses...

Sábado 18 marzo 2023

Functions Fiber breakpoint / length / loss testingFiber breakpoint / length / loss testingFiber breakpoint / length / loss testingFiber breakpoint / length Multi Functions Test One button test,real time test and fiber link map test 3×USB prot 6 hours test Built-in VFL/LS/OPM 16GBTest...

Miércoles 15 marzo 2023

C1Series humidity range is 1-50%RH(adjustable). It could go down to <10%RH, but when it is <8%RH, it is not stable, so if you want ultra low humidity, you could choose our ultra low series CF1 or C2E series. C1 Series have two series, C1U and C1B. It could store different kinds...

Martes 21 febrero 2023

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by CNC grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china machining is combined with...

Martes 21 febrero 2023

CNC boring is used for the shaft sleeve in the transmission shaft of large equipment, and the tolerance of the bearing position is +0.03mm. After welding the accessories, use CNC horizontal boring and milling equipment to process both sides with a concentricity of 0.05mm. CNC Boring...

Martes 31 enero 2023

Suitable for ITO, particle detection, wafer inspection Infinity optical design for different microscope lenses can match infinity objective lens with a different mag High-contrast & brightness image solution Microscope objective design of new modular allows customizing different...

Sábado 21 enero 2023

Dynamic Imaging Particle Analysis Most particle size measurement techniques methods are based on the assumption of spherical shaped particles. This hypothesis leads to significant errors in the analysis if the particles are flake or rod-shaped. Especially for such highly form-anisotropic...

Sábado 21 enero 2023

Precio : ＞0.8USD

Product description WELDING NECK RISE FACE FLANGE（WNRF） Stainless steel weld neck flanges are popularly used in excessive stress applications, with their capability to provide assisting power along with stress distribution. Weld neck flanges are circumferentially welded at the neck...

Sábado 21 enero 2023

Precio : ＞0.8USD

Product description Reducing socket weld flange is a flange with one end welded with steel tube and the other end connected with bolts. It is suitable for connecting pipe with small diameter, high pressure and high temperature, usually used in the pipelines with PN≤ 10.0mpa and DN≤40...