OIL&GAS - 15173 Anuncios

Martes 15 marzo 2022

Cantidad : 10w - Precio : 1~100usd

Overview of Automotive Primer Spray Gun Being the first coating applied, without doubt, primer is a key part of finishing. Not only offering a smooth base, but it also helps cover stains and enhances the protection of the substrate. With such an irreplaceable part in achieving the...

Martes 15 marzo 2022

Cantidad : 10w - Precio : 1~100usd

Description of Tire Inflation Gun If you have a car, you must prepare a tire inflation gun with gauge on your vehicle. It will ensure that you can quickly solve some tire pressure problems. A tire inflation air gun with pressure gauge can be used for filling tires of various types of valves...

Martes 15 marzo 2022

Cantidad : 10w - Precio : 1~100usd

Spray foam gun In the process of spraying materials, spray foam gun is essential. The spray gun foam needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no...

Martes 15 marzo 2022

Cantidad : 10w - Precio : 1~100usd

Overview Of Siphon Spray Gun Thesiphon feed detail spray gun has the paint located directly behind the nozzle and uses airflow to draw the paint upward and cause a paint mist by pressure at the nozzle when spraying. Using a siphon paint gun is more stable to facilitate paint filling...

Sábado 12 marzo 2022

Plastic machinery parts, to put it more precisely, are parts for plastic auxiliary equipment and central loading system. The machinery and system need to be used and maintained properly just like all other products. As time goes on, some parts may be susceptible to abrasion. These...

Sábado 12 marzo 2022

Use oil as the heat transfer medium, connect the mold waterway through , and directly exchange heat with the mold. It has the advantages of high heat conduction efficiency and a large temperature control range. The maximum temperature of the standard type can reach 200~350℃. Features...

Sábado 12 marzo 2022

Mold temp controller, MTC, mold heater, In a broad sense, called temperature control equipment, oil/water mold heaters. Mold temp controller contains heating and freezing temperature control. it is used to heat up the mould and maintain temperature. Soxi provides a wide range of mold...

Sábado 12 marzo 2022

Cantidad : 150000 - Precio : Between 0.2---0.8 US

Yansen Refillable Aluminum Bottle Yansen provides good-quality and modern style aluminum bottles. Although the aluminum bottle will also be corroded, alumina will adhere to the corrosion surface and form a protective film to prevent further corrosion. We have aluminum spray bottles...

Sábado 12 marzo 2022

Cantidad : 150000 - Precio : Between 0.2---0.8 US

Yansen RefPET Bottles Shanghai Yansen Packaging Materials, relying on its own Xinwen Daily Chemical Packaging Factory in Jiangyin City, Jiangsu Province, focuses on foreign trade exports, providing various polyethylene terephthalate bottles, cans and various bottle accessories....

Sábado 12 marzo 2022

Cantidad : 50pcs-200p

- and outside public and commercial facilities, stainless teel Floor Standing wet wipe bin provide clients, guests, and employees with an attractive and affordable method of keeping hands and handles clean and sanitary. An integrated wide-opening waste bin provides users with convenient...

Viernes 11 marzo 2022

Double screw palm oil press machines are another popular type of palm oil equipment, it usually used in large, medium and small scale palm oil mill for oil extraction with fresh palm fruits. The most common processing capacity is 1tph, 5tph, 10tph, 15tph. As for the special processing capacity...

Viernes 11 marzo 2022

Precio : 100USD

Our gas line test gauge are designed for measuring the pressure of the medium which widely used for different gas, such as oxygen, Acetylene, Co2, Argon,H2, LPG, He and so on. Gas pressure readers are Widely used for the welding system for the tank. Different Types of Pressure Gauges...

Viernes 11 marzo 2022

Precio : 100USD

Electric Contact Pressure Gauges Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. Electrical gauges give electrical output which can be used to turn a motor on/off & similar applications. Single or...

Viernes 11 marzo 2022

Precio : 100USD

Digital Pressure Gauges Intelligent digital Pressure Gauges have full electronic structure and use battery-powered. The intelligent digital pressure gauge china has some benefits as follows: flexible use, simple operation, easy debugging, safety, reliability and so on. So they have...

Viernes 11 marzo 2022

Precio : 100USD

Differential Pressure Gauges Differential vacuum gauge measure the difference between two pressures. They are suitable for the monitoring of filter contamination, for level measurement in closed vessels, for overpressure measurement in clean rooms, for flow measurement of gaseous...

Viernes 11 marzo 2022

Precio : 100USD

Diaphragm Pressure Gauges Diaphragm seals are available from many different materials, including 316 SST, Hastelloy C, MONEL, TEFLON and many others. For gaseous and liquid, aggressive and highly viscous or contaminated media, also in aggressive ambience Process industry: Chemical/petro-chemical...

Viernes 11 marzo 2022

Precio : 100USD

Fluorocarbon oil filled air pressure gauge which is used in the oxygen system, with no oil, all stainless steel material, different diameter is available. Specifications of 4 Inch Stainless Steel Pressure Gauge China Oxygen Use With Oil Filled Dial: 1.5", 2", 2.5", 4",6",8"10" Scale ranges...

Viernes 11 marzo 2022

Precio : 100USD

Pressure gauge 1 4 with stainless steel or steel or plastic case, there are many different type such as low pressure, diaphragm seals style, electric contact, differential style, widely used for different system, filled with different oil such as silicone, glycerine, fluorent oil, and so on ...

Jueves 10 marzo 2022

Foot Massager Multiple Modes & Pressure Setting: Include kneading, rolling, scraping, air compression, heating mode, and pressure setting with airbags, this reflexology massager can help stimulate the nerves and make the blood flow better. Remote Control & Timer Function...

Jueves 10 marzo 2022

AX Series (AX-400, AX-500, AX-600, AX700, AX-800, AX-900) portable anaesthesia machine offers SIMV supports the smooth transition to anesthesia resuscitation, promotes resuscitation efficiency, and reduces lung injury caused by man-machine confrontation. CPAP/PSV supports postoperative...

Jueves 10 marzo 2022

Fragrance from A Chinese Flavors and Fragrances Industry Leader  Having aroma that's just right, matching all your varieties of products.  Low dosage saves your costs.  OEM enables you to grow with the development of your customers' preferences.  Publicly-listed reliable producer...

Jueves 10 marzo 2022

Flavors from A Chinese Flavors and Fragrances Industry Leader  Having aroma that's just right, matching all your varieties of flavored products.  Low dosage saves your costs.  OEM enables you to grow with the development of your customers' preferences.  Publicly-listed reliable producer...

Jueves 10 marzo 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Medical Plastic Moulding Product material: PP material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand: Incoe Mold base: LKM Surface finishing: Mirror polishing Mold lead time: 6 weeks What is the medical plastic injection ? Medical-grade polypropylene...

Jueves 10 marzo 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Insert Mold USM molds focus on structural insert molding service, gas-assisted water-assisted molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding processing...

Jueves 10 marzo 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas-assisted molding; The product wall thickness of water-assisted...

Miércoles 09 marzo 2022

Precio : 100USD

What material is used in injection moulding？Materials used in injection moulding generally include pla molding, nylon injection molding, polypropylene plastic injection molding, pp injection moulding, pvc injection molding, hdpe injection molding and so on. Injection moulding raw...

Miércoles 09 marzo 2022

Methyltrichlorosilane (M1) 390 Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane)...

Miércoles 09 marzo 2022

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Miércoles 09 marzo 2022

This product is a colorless transparent liquid, inflammable, explosive. Dimethyl dichloro silane is the raw material of silicone products, the reaction generated under the influence of water HCL, avoid sharp, contact heat, fire, and static electric spark. Document Download Technical...

Miércoles 09 marzo 2022

Product Name: Dimethylcyclosiloxane (DMC) Molecular Formula: [(CH3 ) 2 SiO]n ，n=3~7 CAS No.: 69430-24-6 Physical and Chemical Properties: Flash Point: 55℃ Relative Density (water=1): 0.956 Appearance: Colorless transparent liquid without visible impurity Technical Data of Dimethylcyclosiloxane...