ELECTROMAGNETIC - 1360 Anuncios

Viernes 08 enero 2021

Cantidad : 150 sets/m - Precio : USD $1000~$30000

We manufacture supply top quality electromagnetic clutches and brakes that are in applied in shuttleless weaving machines and we have sulzer loom pick wheel chart. Our history of researching and developing clutch and brake start from last century, and our company has grown together...

Viernes 08 enero 2021

As one of the turnstile suppliers, CXT tech dedicates to providing all kinds of middle and high-class Turnstile solutions for Integrators and Distributor worldwide with 12 years history. Revolving door turnstile Unique Features: Adopt Brush-less motor, the revolving turnstile/ gate...

Miércoles 06 enero 2021

Precio : 100USD

Copper tape, also called copper foil shielding tape, is made of copper with a purity higher than 99.95% as the base material and coated with acrylic adhesive. The copper sticky tape is divided into single conductive and double conductive: single conductive coated with non-conductive glue...

Martes 05 enero 2021

GK1720A Grinding Mill is designed by our technicians based on GK1720 mill.This is a large type mill with optimized design. Technical & Structural Benefits of roller ball mill: Optimized shock-absorption design for the main unit, reduce vibration when the mill running. Optimized...

Sábado 05 diciembre 2020

Cantidad : 2000 units - Precio : 500-10，000，000

Wire Drawing Machine has advanced technology is introduced from Europe, lots of parts have patent for invention, the high efficiency also high endurance and humane designings are safe and reliable; High precision of PLC control, LCD display is easy for operating, have mighty graphics library...

Jueves 03 diciembre 2020

Precio : USD 0.1-10000

Ultra High Frequency RFID tags normally operate from 860-960 MHz, its data is transmitted via far-field radiative coupling and backscatter coupling technology, which means that the RFID reader sends electromagnetic waves to RFID tag, the energy from the electromagnetic waves go through...

Jueves 03 diciembre 2020

Precio : USD 0.1-10000

Low frequency RFID tags are usually passive and do not require a power source or battery. They normally operate at 125KHz RFID antenna and 134KHz RFID antenna, its data is transmitted via inductive coupling electromagnetic, which means that the RFID reader induces a current in the...

Jueves 03 diciembre 2020

Precio : USD 0.1-10000

High-Frequency RFID tags transmit its data via inductive coupling electromagnetic, which means that the RFID reader induces a current in the RFID tag which then powers the RFID tag and sends out some basic identification information to the RFID reader. HF RFID tags normally operate through 13...

Jueves 03 diciembre 2020

Precio : USD 0.1-10000

Active RFID tag operation principle is electromagnetic emission, different from passive RFID tags, long range active rfid tags is powered by battery, its operation frequency is 433MHz, 2.45GHz and 5.8GHz, it features ultra long identification distance(up to 150 meters), batch identification(up...)

Jueves 12 noviembre 2020

Cantidad : 1000000pcs - Precio : $6-$500

Why Do We Need fo media converter? As we all know, CAT5/6 can only cover about 100 meters, for longer distance transmission it's obviously not enough. Under such circumstances, fiber and media converter device play a very critical part. By converting Ethernet into fiber optical signal...

Sábado 07 noviembre 2020

Cantidad : 1 - Precio : 80000-2000000

Eddy current weld inspection is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe...

Sábado 07 noviembre 2020

Precio : 80000-2000000

Ect testing machine is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. The principle of eddy current testing machine is that the...

Miércoles 28 octubre 2020

Dynamic Image Particle Analyzer with Dry Dispersion The BeVision D2 particle image analyzer(particle shape analyzer) is a microscopic image particle size and particle shape analyzer for non-destructive measurement of coarse particles and millimeter range powder materials. BeVision...

Jueves 22 octubre 2020

Precio : USD $1000~$30000

SUN200 series jacquard weave machine is specially designed to fit with low speed rapier loom and shuttle looms, it is ideal for weaving terry cloth, velvet, necktie, decorative cloth, curtain, shirting and saree, silk fabrics etc. The electronic jacquard is available from 480 hooks to 1408 hooks...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications. soft ferromagnetic are superior, it is helpful for the device to be small and lightweight...

Domingo 11 octubre 2020

Cantidad : 200 units, - Precio : $60~$20,000

Smoothing circuit, efficient from IGBT motor drives, so as to extending service life of electric motors. Reduce motor noise and eddy loss. Reduce the leakage current resulted from the output of high harmonic. Protect the electronic power switch within the inverters. It is installed...

Domingo 11 octubre 2020

Cantidad : 200 units, - Precio : $60~$20,000

Low-voltage three-phase AC: 380V (-20%, +15%), 50Hz applies Motor: general squirrel cage asynchronous motor Protection level：Ip00 Features of MSS1000 Series Digital Intelligent Soft Starter starting method: ：①Voltage ramp start ②Current limiting start ③Jog No phase sequence requirement...

Domingo 11 octubre 2020

Cantidad : 20 sets - Precio : 650-750 USD

Flight controller: NAZA-M-V2 Maximum rising speed: 6m/s Maximum falling speed: 4.5m/s Maximum horizontal flight speed: 10m/s Maximum tilt angle: 35° Working temperature: -10℃-50℃ Hover accuracy: vertical±0.8m, horizontal±2.5m Maximum wind speed level: c The Poseidon-PRO fishing...

Domingo 11 octubre 2020

Cantidad : 20 sets - Precio : 650-750 USD

IDEAFIY Poseidon Pro, a specialized drone with camera for offshore fishing, is highly sealed, waterproof, wear-resistant, and corrosion-resistant. Professional Waterproof Fishing Drones-Born for Fishing！ IDEAFIY Poseidon 480 fishing drone has the characteristics of long battery life...

Martes 15 septiembre 2020

- Magnetic Latching Relays Manufacturers - Zhejiang Zhongxin New Energy Technology Co., Ltd. is a professional China magnetic latching relays manufacturers and magnetic latching relays company, established in February 2016 after the Haiyan Zhongxin Electronics Co., Ltd.'s stock reform...

Viernes 11 septiembre 2020

Precio : 80000-2000000usd

Tubing repair is an important measure to reduce the comprehensive cost of production in oil production plants to improve the quality of repairing tubing. It can ensure the quality of oil and water wells to prolong the inspection cycle, reduce the rework of operations and reduce operating costs...

Martes 08 septiembre 2020

The pulse radar level transmitter adopts the microwave pulse measurement method, and can be normal in the industrial frequency band range, the beam energy is low, can be installed in various metal, non-metallic containers or pipelines, the liquid, slurry and granular material level...

Martes 08 septiembre 2020

Capacitance level transmitter/sensor/gauge is a measuring instrument that uses the change of capacitance to measure the medium level in the container. Inside the container, the container wall made of electrodes and conductive material forms a capacitor. For a given electrode, when...

Martes 08 septiembre 2020

Cantidad : 50 units p - Precio : 10000-500000

Equipment Description of High Disposition Automotive Sunvisor Welder Our company's production of high-frequency mat welding machine for sun visors of cars introduce advanced technology and major components, complete product range, stable quality. It can also be customized according...

Martes 08 septiembre 2020

Cantidad : 50 units p - Precio : 10000-500000

Equipment Description of Automated Travelling Head High-Frequency Auto Welding Machine Automated traveling head high-frequency welding machine, specializing in the production of architectural stretch film structure, tents, truck tarpaulins, PVC oil tanks, large advertising clothes...

Martes 08 septiembre 2020

Cantidad : 50 units p - Precio : 10000-500000

Equipment Description of Car Seat Embossing Hf Welder The two sides of the slide can be set up with three sections of adjustable time, adjustable power, and adjustable pressure. Electromagnetic radiation conforms to GB/T18555-2001 (providing third party normal institution inspection certificate)...

Viernes 28 agosto 2020

Precio : 50-2000USD/pcs

The industrial PCAP touch LCD 17 inch monitor AMG-17OPGD01T3 made by Amongo features as below: Branded LCD panels with perfect image quality and wide viewing angles, industrial-grade components adopted for a reliable 24/7 longtime use; Durable mechanical design to meet tough environmental...

Jueves 06 agosto 2020

Foshan Shunde Huada Electric Appliance Manufacture Co., Ltd. is a Sino-foreign joint venture specialized in producing lighting products .Since established in 1987,Hauda has expanded and developed from a single manufacturer into a group company engaged in scientific research, production...

Viernes 03 julio 2020

Precio : 50-150000 USD

We are professional Side loading electric forklift supplier and factory in China. We can produce the product according to your requirements. TD Series side loading forklift trucs, rated load capacity: 2500kg, lift hieght: 7200mm, used for long material transportation; 1. The lift...

Miércoles 01 julio 2020

Sheet metal processing or sheet metal fabrication includes: folding, shearing, punching, welding, riveting, splicing and other processes. In general, the process of forming a sheet by hand or mechanical is called sheet metal processing. Sheet metal processing is to cut and bend metal...