JAWS - 774 Anuncios

Sábado 31 mayo 2014

Cantidad : high

Product Description Flotation machine is used for processing nonferrous, ferrous metals, and nonmetals such as coal fluorite and talcum. The flotation machine of Shunky is a key part of a complete series of 3-1000t/d professional mineral processing equipments under the support from...

Sábado 31 mayo 2014

Cantidad : high

Product Description The magnetic system of magnetic separator is made of compound materials composed of high grade ferrite materials and rare earth alnico. The average magnetic induction of the drum surface is 100mt to 600mt. Different types of magnetic separation such as forward flow...

Sábado 31 mayo 2014

Cantidad : high

Product Description Mobile Cone Crushing Plant is not limited to the location of crushing operation, and it reduces the cost of material transportation. The Mobile Cone Crushing Plant can crush materials on site or somewhere near the work site.The Mobile Cone Crushing Plant is widely...

Sábado 31 mayo 2014

Cantidad : high

Product Description Mobile Screening Plant is a high-effective screening equipments. It adopts the type of self-driving with advanced technology and complete functions. No matter where It can arrive any places at working site, which can save much time that should process materials...

Sábado 31 mayo 2014

Cantidad : high

Product Description Impact Crusher is the main machine of the Mobile Impact Crusher Plant,it's used as secondary equipment after in the Jaw Crusher. Mobile Impact Crusher Plant is mainly used for metallurgy, chemical industry, building materials, water and electricity's materials...

Sábado 31 mayo 2014

Cantidad : high

Product Description 6S series new Sand making machine is based on the original high-performance VSI series and then combined with operator's practical experience , Shunky Company improves it's efficiency through reducing wear rate and maintenance time, it is greatly extends maintenance...

Sábado 31 mayo 2014

Cantidad : high

Product Description GPY series high-energy hydraulic cone crusher is a high-energy single-cylinder hydraulic cone crusher. It is elaborately designed by the company after absorbing foreign and domestic advanced technologies. The machine adopts design principle of combining lamination...

Sábado 31 mayo 2014

Product Description The jaw crusher is mainly used for crushing the stones of which largest compression resistance is 320MPa. This series is complete in specifications and the first choice of primary crushing equipment. Its structure iseasy and solid. It is easy to maintain and enjoys...

Sábado 31 mayo 2014

Product Description The design of impact crusher adopts novel design principle, new concepts of crushing technology; meets demands of crushing different materials in different degrees; satisfies the need of “more crushing, less wearing”. Impact crusher not only has a great crushing...

Martes 20 mayo 2014

Product Description Hammer crusher includes single rotor hammer crusher, high efficiency hammer crusher, granulated substance machine, vertical shaft hammer crusher, reversible hammer crusher, ring hammer crusher etc. If the hammer of the hammer crusher is replaced by steel ring...

Martes 20 mayo 2014

Product Description The Shunky CS series cone crusher is designed to crush high or medium hardness material, such as iron ore, copper ore, limestone, quartz, granite, etc. and is normally used as second or third crushing equipment in metallurgy, road construction, chemical engineering...

Viernes 16 mayo 2014

Jaw crusher spare parts jaw crusher tooth plate I plant PE series jaw crusher (PE250 × 400, PE400 × 600, PE500 × 750, PE600 × 900), This series of crusher is simple in structure, reliable operation, convenient maintenance, the advantages of small volume and height. Is widely used...

Viernes 16 mayo 2014

Hot selling jaw crusher spare parts jaw plate Application: mining, cement, quarry Product Material: super high manganese steel and high chromium alloy steel Applicable materials: granite, basalt Dimensions: as per customer drawings Manufactured with super high manganese steel...

Sábado 10 mayo 2014

www(dot)mouldingparts.com/Crusher-parts/ Hot Sale Jaw Crusher Tooth Plate : 1.Capacity: 20-105t/h 2.Power: 55kw 3.Max Feed Size: 250mm 4.ISO,CE,CQC,BV Advantages and Characteristics of Hot Sale Jaw Crusher Tooth Plate: 1. Short toggle 2. Low hanging 3. Big swing angle 4...

Sábado 10 mayo 2014

www(dot)mouldingparts.com/Crusher-parts/ Jaw-Plate.html SEBON Jaw plate is manufactured with super high manganese steel, So jaw plate has a service time 50~100% longer than those made of traditional high manganese steel. Also the special processing techniques could ensure SEBON...

Miércoles 07 mayo 2014

Product Description Shunky VSI Crusher (Sand-Making Machine) is one of the most advanced sand-making equipments in the world and is further improved after introducing German Bamaque technology. Shunky VSI Crusher is especially suitable for sand making and stone reshaping and is...

Miércoles 07 mayo 2014

Product Description Hydraulic Cone Crusher adopts the best combination of crushing frequency and eccentricity, so size of the crushed product is much smaller. Therefore, more crushing and less grinding efficiency is more significant, crushing and grinding power consumption is reduced greatly...

Viernes 18 abril 2014

Cantidad : min 1 - Precio : USD110000

Sand-Lime Brick Production Line project introduction 1. Sand-Lime Brick production line raw materials Storage and Mixture Preparation 1.1 Quick Lime After transported to the factory, the massive lime will be poured into the receiving hopper by the forklift. It will be smashed...

Miércoles 02 abril 2014

Sand-Lime Brick Production Line(http://www.chinablockmachine.com/product/ps_4_32_1.html) project introduction 1. Sand-Lime Brick production line raw materials Storage and Mixture Preparation 1.1 Quick Lime After transported to the factory, the massive lime will be poured into...

Sábado 29 marzo 2014

Cantidad : 200tons - Precio : 12usd

Cement industry - Mill liners, cooler grate plates, mill roller tyres, impactor hammer, grinding beams, striking bars, blow bars, heat-resisting parts that are subject to sulphur-bearing gases & thermal shock due to rapid heating & cooling Quarry & metalic ore casting...

Viernes 14 marzo 2014

Cantidad : customized

We can manufacture all kinds of wear parts of crusher according to customers' requirements and drawings. If you are interested in our products and want to know information from us please feel free to contact us. Concaves & Mantles for Cone Crushers 1.Professional mining equipment...

Viernes 14 marzo 2014

Cantidad : customized

Specifications High Mn blow bar 1. Super high manganese materials 2. High safety, strong wear resistance 3. Competitive High Mn impact blow bar 1 We make reasonable composition for super-high manganese materials 2 High safety, strong wear resistance, low price and shortens delivery time...

Viernes 14 marzo 2014

Cantidad : customized

Crusher Parts Jaw Plate overview Jaw plate is manufactured with super high manganese steel, therefore it has a service life 50~100% longer than those made of traditional high manganese steel. Every model of PE series jaw crushers is tested for shock, stress, strain, thermal loading...

Jueves 06 marzo 2014

Liposuction Laser Like Fotona 980nm diode laser lipolysis equipment Specifications gigaa liposuction laser velas 15w 1210nm velas30w 980nm full accessories CE marked gigaa liposuction laser Velas Laser System is newly developed diode laser for medical application specially...

Miércoles 26 febrero 2014

Cantidad : 2000PCS - Precio : 1,67 €

Product Name: Possum Leg Hold Trap/Coil spring leg hold trap Item Code: ATM2836 Item Size: Large plate and jaw spread of 10cm Packaging Detail: pp bag or others according to customer's requirement Delivery Detail: 45-60days Product Description: This is a solid, reliable Possum...

Viernes 22 noviembre 2013

Cantidad : *** - Precio : ***

Cement Introduction Cement in powder form can be changed from plasticity paste to hard stone-like body and can become a total cemented granular materials through physical and chemical processes after being mixed with water. So cement is a good mineral binder. Cement can be not only...

Viernes 15 noviembre 2013

Cantidad : 2000PCS - Precio : $0.78

Product name: "Conibear" traps Item Size: 15x13CM Product Code; ATM2830 Delivery time: 10days-60days according to the payment term and quantity Packing detail: The product puts into the carton directly or customization. Product Description: This is the traditional designed...

Jueves 07 noviembre 2013

Cantidad : 200 - Precio : 140USD

Calibradores Digital de Radios, Calibradores R Digital Calibradores Digital de Radios, Calibradores R Digital La medición del radio de la herramienta. Funciones: Puede ser utilizado como Calibradores digital Calibradores del radio exterior Calibradores del radio interior Profundidad...

Miércoles 30 octubre 2013

Cantidad : neuf - Precio : 0-999999

Certifié par l'UE, acquérir des brevets national, le Broyeur à trapèze de super pression eu une bonne réputation auprès de nos clients à travers du monde. Basé sur le technique du moulin à Cylindre, le Broyeur à trapèze de super pression adopte des techniques plus développées et exclusivités...

Sábado 26 octubre 2013

Cantidad : 1 - Precio : 10,00 €

Product Description： GPY series high-energy hydraulic cone crusher is a high-energy single-cylinder hydraulic cone crusher. It is elaborately designed by the company after absorbing foreign and domestic advanced technologies. The machine adopts design principle of combining lamination...