CHEMICAL - 8996 Anuncios

Jueves 17 marzo 2016

Amorphous Calcium Aluminate Keywords amorphous calcium aluminate, non crystalline calcium aluminate, non crystallized calcium aluminate, amorphous C12A7, ACA, concrete accelerator, CAS No. 12042-68-1, cement addititve, shotcrete additive, concrete additives. trademark: hnkingway Description...

Miércoles 16 marzo 2016

Cantidad : 1-20 - Precio : 40000-200000 usd

Company Profile: Chongqing Fason Purification Equipment Co., Ltd was formerly known as an institute which was engaged in waste oil analysis at the beginning of 1990s. In 2007 the institute has officially changed its name to Chongqing Fason Purification Equipment Co., Ltd. In 2011...

Miércoles 16 marzo 2016

Cantidad : 1000000 - Precio : 75,00 €

High speed Corrugator Belt With Kevlar Edge is a consistent development bason on the high speed corr ugator belt.It is ideal for corrugating systems with high production speed,even load systems and fre quently changing paperboard widths.the belt's edge reinforcement of kevlar fibers...

Martes 15 marzo 2016

Cantidad : 100sets/ye - Precio : Negotiatable

Introduction Compound crusher is a comprehensive domestic and foreign similar technology, the main technical parameters to optimize the design developed from the new crushing, coarse grinding products, mainly for medium-sized cement crushing cement raw material, clinker. It provide...

Sábado 12 marzo 2016

Cantidad : 50sets/yea - Precio : Negotiatable

Application The equipment structures of manganese ore briquette machine are similar to the coal briquette machine, dry powder briquette machine and other briquette machine. It can be used for pressing coal powder, iron powder, coking coal, aluminite powder, scrap iron, oxide-scale...

Sábado 12 marzo 2016

Cantidad : 50sets/yea - Precio : Negotiatable

Application Sawdust pressure ball machine can be used to suppress sawdust, coke, rice husk and other powder, powder material, scrap, waste, widely used in refractory, power plants, metallurgy, chemical industry, energy, transport, heating and other industries, materials after the...

Sábado 12 marzo 2016

Cantidad : 50sets/yea - Precio : Negotiatable

Application Flue dust briquette machine is using for press the coal powder, iron powder, coking coal, aluminite powder, scrap iron, oxide-scale, carbon powder, charcoal powder, slag, gypsum, tailings, sludge, Kaolin, activated carbon, dust coke and all kinds of powder, powder materials...

Sábado 12 marzo 2016

Cantidad : 50sets/yea - Precio : Negotiatable

Structure of Iron Powder Briquette Machine Feeder system--- achieved dosing feeder to ensure the iron powder feed evenly. Matching motor--- fine iron powder briquette machine the constant of the electromagnetic motor seed control until the weight of the feeder is equal to the needed weight...

Sábado 12 marzo 2016

Cantidad : 200kgs - Precio : 10.68usd

food grade silicone rubber for cake molding Food grade Silicone Rubber cure at room temperature with negligible shrinkage. With different hardne sses to choose from, OTT products offer tremendous versatility and are suitable for making productio n molds of any configuration, large or small...

Sábado 12 marzo 2016

Laizhou xinyuan machinery factory is a collection of casting and machining for the integration of large-scale private joint-stock enterprise. Company is located in the beautiful coastal city of Laizhou, in the north of Qingdao city, Qingdao port is only 150 km, very convenient....

Sábado 12 marzo 2016

Cantidad : 1set - Precio : Negotiatable

Introduction FuYu dry powder ball press machine can be used for pressing various powdered materials that have low moisture content : lime powder, coal powder, iron powder, coke, aluminum, iron, iron oxide, carbon powder, charcoal powder, slag, gypsum, tailings, sewage sludge, kaolin...

Viernes 11 marzo 2016

Cantidad : 2000 - Precio : USD 6.5

5 In 1 Face Massager Rotating Cleansing Electric Facial Cleaning Wash Brush welcome OEM Product Description Our 5 In 1 Face Massager Rotating Cleansing Electric Facial Cleaning Wash Brush welcome OEM is powered by 4 pcs battery,3 adjustable speed,waterproof IPX 7,easy and conveientto...

Viernes 11 marzo 2016

Cantidad : 2000 - Precio : USD 6.5

Hot New Beauty Proructs for 2016 Waterproof Spin Skin Cleansing Face and Body Brush Product Description Our Hot New Beauty Proructs for 2016 Waterproof Spin Skin Cleansing Face and Body Brush is powered by 4 pcs battery,3 adjustable speed,waterproof IPX 7,easy and conveient to use and store...

Viernes 11 marzo 2016

Cantidad : 2000 - Precio : USD 6.5

2016 Newest Hot Sale ABS Material 5 in 1 Facial Fachine Exfoliating Brush Product Description Our 2016 Newest Hot Sale ABS Material 5 in 1 Facial Fachine Exfoliating Brush is powered by 4 pcs battery,3 adjustable speed,waterproof IPX 7,easy and conveient to use and store, can...

Viernes 11 marzo 2016

Cantidad : 2000 - Precio : USD 6.5

Ubicación : Floor 2-3,NO.80 Baoshi East Road,Shiyan Street,Bao'an District,Shenzhen,Guangdong,China, 518109 Shiyan, Persona a contactar : Cherry liu, 0755 27526671

Viernes 11 marzo 2016

There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant...

Jueves 10 marzo 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jueves 10 marzo 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jueves 10 marzo 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Miércoles 09 marzo 2016

Cantidad : 20000piece - Precio : 13-25/piece

Material : 100% Cotton 100% cotton flame resistant fabric Feature: Anti-Static, Anti-UV, Blackout, Flame Retardant, Fusible, Heat-Insulation, Shrink-Resistant, Tear-Resistant, Waterproof Use: Cover, Curtain, Garment, Industry, Jean, Lining, Raincoat, Color: all color is available...

Martes 08 marzo 2016

Main Features: JM series spinning extruder is applicable to the chip of PETP,PA6,PA66,PP etc. melting and spinning. Adopting good quality material,advanced design and processing technology makes our spinnin g extruders widely used for big project of chemical fiber successfully....

Viernes 04 marzo 2016

Cantidad : 32 pcs/ctn - Precio : 5.8USD/pc

The battle of the mice and men is over! THIS REALLY WORKS! A much more humane way to keep pests away. Just plug the RATMAN HCR-021 ULTRASONIC PEST REPELLER in the outlet and it will repel mice and rats away from your home. No harsh chemicals, No gross looking traps set up around...

Jueves 03 marzo 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jueves 03 marzo 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jueves 03 marzo 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Martes 01 marzo 2016

Cantidad : 999

Product Description AMITTARI l Whiteness Meter is mainly used to directly measure the whiteness value of object or powde r with flat surface. It can be widely used in whiteness measurement of textile printing and dyeing, paint, chemical building materials, paper board, plastic products...

Domingo 28 febrero 2016

Before the curing Appearance A: Trasparent B: Blue Relative Density 0.96～1.00(g/cm3) Viscosity At 25℃ A: 650~850 B: 650~850 (mPa·s) After the curing Degree 240~280 Fire resistance Flameout Time ＜16s curing time ＜2h Complete time ＞4h 1.Features ZS-GN01A/B is a kind...

Domingo 28 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Domingo 28 febrero 2016

Precio : 20$

Basic information: CAS# : 13463-67-7 Property: This product is a dedicated cosmetic titanium dioxide; it can effectively prevent the damage of UV o n human skin. This product is non-toxic and harmless, and has an excellent compatibility with other raw materials of cosmetic. Because...

Sábado 27 febrero 2016

Cantidad : 1 piece - Precio : 54$

Materials: Steel Surface treatment: Zinc HITOAUTO is a ISO/TS 16949: 2009 certified company with specializes in the truck body pats, commercial van body parts, curtain side van parts, refrigerated truck parts, wing body truck parts, container parts and so on.. Products include hinges ...