STEEL SQUARE - 27402 Anuncios

Viernes 11 noviembre 2022

Cantidad : 100000 - Precio : $2-$5

The MT ferrule is a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and AOC cables. 12 and 24-fiber mt ferrules are the most commonly used types. As one of the professional China ferrule manufacturer and suppliers, T...

Viernes 11 noviembre 2022

DIFFUSOX™ DiffuSox™ fabric air diffuser is made of metal frame and highly permeable fabric, the air dispersion surface attach to the metal frame via Velcro, connecting to metal inlet via square to round fitting and detachable inlet. Advantages of Diffusox Air AC Duct Diffuser Quiet ...

Viernes 11 noviembre 2022

Zhejiang BI is a certified female and children cotton pad manufacturer, manufacturing different types of cotton-made pads at a competitive price, including square cotton wool pads, and round cotton makeup pads. Our high-quality natural cotton pads are perfect for removing gel polish...

Viernes 11 noviembre 2022

The half inch and 1 inch pex ball valve provided by Carbo, a professional pex ball valve factory, has good wear resistance. The reason for the OEM ball valve wear resistance is that the valve core when it is sealed is welded with alloy steel, and its sealing ring is also welded with alloy steel...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

FBG optical tilt sensor TL-01 has a linear relationship between the reflection wavelength and the tilt angle. It is suitable for temporary or permanent monitoring. Multiple or other types of fiber grating sensors can be connected in series for real-time monitoring. It is easy to build...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

FBG fiber optic thermometer ST-01 uses stainless steel sleeve packaging technology, which has good anti-corrosion and sealing performance. High-strength armored optical cable is used for fiber lead in and out, which is suitable for harsh measurement environment, can be directly buried...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

The sensitivity of the FBG temperature sensor is sometimes referred to as the resolution or temperature sensitivity of the sensor, that is, the minimum temperature change that the sensor can measure. To be precise, the sensitivity of each FBG fiber optic sensor temperature is different...

Viernes 11 noviembre 2022

Plastic molded products include single section shoot, double section shoot, double section shoot, flat tip, flat tip, positioning column, plastic mold guide sleeve, straight sleeve, middle column sleeve, plastic mold guide sleeve, etc. Features of Mould Spare Parts Plastic parts injection...

Viernes 11 noviembre 2022

Mould component are also a part of the mould. GM-TECH not only produces precision moulds but also provides customers with high-precision, low-cost mould parts. For example mould cores, inserts, sliders, lifter, wear plates, ejector pins, etc. Usually, processing accuracy can be controlled...

Viernes 11 noviembre 2022

Insert molding is an injection molding process used to encapsulate a component in a plastic part. The insert custom plastic injection molding process can be divided into two basic steps. First, the component is loaded into the mold before the molding process. Second, it takes the...

Viernes 11 noviembre 2022

The development and design of plastic injection molding home appliance parts pay attention to safety and health. In-home appliance industry, polypropylene plastics are used extensively in washing machines and dishwashers. As one of the leading plastic injection molding products manufacturers...

Viernes 11 noviembre 2022

431 ss (stainless steel) sheet has a good oxidation resistance and intensity of medium temperature. So it is widely used in decoration, sugical instruments, household appliances, cookware.lableware automobile and other industry construction. 431 ss (stainless steel) has high strength...

Viernes 11 noviembre 2022

430 grade stainless steel sheet is general-purpose steel with good corrosion resistance. It has better thermal conductivity than austenite, a smaller thermal expansion coefficient than austenite, heat fatigue resistance, addition of stabilizing element titanium, and good mechanical...

Viernes 11 noviembre 2022

420J2 stainless steel strip belongs to the Japanese standard martensitic stainless steel, the implementation standard: JIS G4303-2005. 420J2 This steel has good mechanical processing performance. After heat treatment (quenching and tempering), it has excellent corrosion resistance...

Viernes 11 noviembre 2022

420j2 stainless steel, also called 3Cr13 steel, is martensitic stainless steel, used after quenching and tempering. Compared with 1Cr13 and 2Cr13 steel, 420J2 stainless steel has higher strength, hardness and hardenability, but its corrosion resistance and thermal stability below...

Viernes 11 noviembre 2022

aisi 420 equivalent stainless steel: After quenching, it has high hardness and good corrosion resistance (magnetic). After quenching, the hardness of 420J2 stainless steel is higher than that of 420 steel (magnetic). There are 44 equivalent materials for aisi 420 equivalent Stainless Steel...

Viernes 11 noviembre 2022

410 stainless steel is a stainless steel grade produced in accordance with the American ASTM standard, which is equivalent to my country's 1Cr13 stainless steel, S41000 (American AISI, ASTM). 0.15% carbon content, 13% chromium content, ss410: has good corrosion resistance, machinability...

Viernes 11 noviembre 2022

The new grade of 316TI stainless steel sheet is 06Cr17Ni12Mo2Ti. 316TI is to add Ti to SUS316 steel to improve the resistance to intergranular corrosion. 316Ti corrosion-resistant stainless steel sheet is widely used in chemical, food, medicine, paper, petroleum, atomic energy and...

Jueves 10 noviembre 2022

Air duster gun ZEGO provides high quality air compressor duster gun for blow-off drying for engine block, cutting chips, coating powder and dust on steel plates. Professional advice and good service. RFQ today! Applications of air duster gun What is an air duster gun used for? There...

Jueves 10 noviembre 2022

Precio : 100USD

Casting is one of the basic processes of modern equipment manufacturing. The casting process can be divided into three basic steps, namely casting metal preparation, mold preparation, and sand casting and die casting processing. Casting metal refers to the metal material used for...

Jueves 10 noviembre 2022

Precio : 100USD

As a cnc machining service supplier, ETCN offers a quality CNC me metal folding/bending press after laser cutting which is used for the base of the compressor motor. Different types of metal bending are available to our clients and meet their satisfaction, like bending stainless steel plate...

Jueves 10 noviembre 2022

Precio : 100USD

Professional CNC Machining Service Company ETCN was established in September 2008. After years of accumulation and development, it has formed a comprehensive manufacturer with custom machining services as the mainstay, supplemented by stamping, forging, casting, and welding processes...

Jueves 10 noviembre 2022

Because special design and unique structure make pump at a very high efficiency and easy to operate. All Pumps Machinery Supply Dry Priming Vacuum Assisted Pumps is a single stage, centrifugal, end suction pump with a high capacity, belt pulley driving vacuum pump, and a single acting...

Martes 08 noviembre 2022

Anpeng Woven Wire Mesh As a professional woven wire mesh factory, Anpeng wire screens should be your first choice for wear-resistant screen cloths manufactured from superior long-lasting high tensile screen wire or 304 and 316 grade stainless steel. Tighter tolerances, long-wearing...

Martes 08 noviembre 2022

Slotted PU Mesh Wholesale Anpeng PU-Mesh are made of abrasion-resistant polyurethane materials with steel wire structure embeded. PU-Mesh comes in square or slotted opening in either fully welded, or partially welded style. It offers improved efficiency compared with traditional wire screen...

Martes 08 noviembre 2022

Anpeng Self Cleaning Wire Mesh series is designed for though to screen applications where blinding, pegging and clogging are a crucial problem. PU bands, made with 90 Shore A ( Poly Hardness ) polyurethane, bind together with steel wires allowing high-frequency vibration during screening...

Martes 08 noviembre 2022

Anpeng PU-Mesh Anpeng PU-screens are made of abrasion-resistant polyurethane materials with steel wire structure embedded. Comes in square or slotted opening in either fully welded, or partially welded style. It offers improved efficiency compared with traditional wire screen, with...

Martes 08 noviembre 2022

Diamond Opening Self-cleaning Screen Anpeng Diamond shape self-cleaning is consist of crimped round wires bond togther by polyurethane bars creating the 'Square' or 'Diamond' openings. This type of screens serves all the functions of traditional Square woven wire mesh, by providing...

Martes 08 noviembre 2022

Anpeng Anti-clogging Screen Independent wires are bind together horizontally with wire wefts woven in between.This type of flexible connection allows the wires to vibrate freely at different frequencies preventing material accumulating between the wires. It effectively screens all kinds of damp...

Martes 08 noviembre 2022

Anpeng Screening Media Our high-performance woven industrial screen mesh, self-cleaning wire screen, and PU-Mesh are tailored and customized to meet your specific screening challenge. Years of examinations and innovations of wire mesh screen material made Anpeng one of the best wire...