13±1MM - 1560 Anuncios

Lunes 28 septiembre 2020

Pixel Pitch: 1.25mm/ 1.5625mm/ 1.667mm/ 1.923mm/ 2.5mm/ 3.1mm/ 4.1mm/ 6.2mm Panel Weight: 1.5KG/panel Average Power Consumption: 480W/sqm Brightness: 600-1000 nits Weather Rating: For indoor only Flat LED Screen AmRigidPro series allows a wide and smooth view of digital content. The...

Martes 22 septiembre 2020

Cantidad : 30pcs

The single use surgical skin stapler places one staple each time when the instrument is activated. The staple penetrates the skin, then forms to hold two sides of incision together. The disposable surgical stapler cannot be applied directly over bone or viscera with a distance of less than 6...

Martes 22 septiembre 2020

Cantidad : 30 sets - Precio : USD10,000-USD100,000

Purlins are rolled forms of flat steel sheets ranging between 1mm and 3mm steel. They are used for building the roofs and walls to support the deck. A stack of rollers are used to shape the flat sheet into the required purlin shape. Structural C and Z section purlins are made of...

Martes 22 septiembre 2020

ERW pipe means electric resistance welded pipe, and it is a resistance welding by 10-500 kHz of high-frequency current. The raw material of the ERW steel pipe is hot rolled steel coil made of steel billet, and the usual material is Q195, Q215, Q235, Q355 in China ERW pipe grade,...

Sábado 12 septiembre 2020

Cantidad : 10000 - Precio : 1-100

Introduction Of Print and Press-Apply Labeling System PLS540 PLS500 Series print & label apply system is unrivaled regarding stability. It uses Zebra ZE500 printing engine and this engine is one of the most professional printing engines in the world. The other structure used the...

Viernes 11 septiembre 2020

Precio : 10 000,00 €

The punching force of D-ES300 series is coming from the main servo motor, which transmitted the force by a directly driven connection rod, this transmitting structure retains the advantage of mechanical driving TPP, which are mature and stable. The eliminated mechanical gap enables...

Viernes 11 septiembre 2020

Precio : 500-10，000，000

Manual Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion Features of Stirrup Bender WG12F 1This CNC intelligent...

Martes 08 septiembre 2020

Liquid level and material level measurement is a problem often encountered in the industry. Ultrasonic positioning technology has many advantages. It can not only fix points and continuous positioning, but also conveniently provide the signals required for telemetry or remote control...

Martes 08 septiembre 2020

Cantidad : 50 units p - Precio : 10000-500000

Equipment Description of Automated Travelling Head High-Frequency Auto Welding Machine Automated traveling head high-frequency welding machine, specializing in the production of architectural stretch film structure, tents, truck tarpaulins, PVC oil tanks, large advertising clothes...

Viernes 28 agosto 2020

Sheet metal box bending, also known as metal box fabrication, is often used to deform material to an angular one, which is one of the most important aspect of sheet metal forming bending. As one of the most experienced sheet metal box manufacturers, HSF fabrication supplies custom...

Viernes 28 agosto 2020

Material: SPCC, secc sgcc,Stainless Steel,copper, aluminum,and so on Surface treatment: Power coating, Polishing, Plating, Brushing, sandblasting, anodizing,passivation,silk-print ect. Tolerance: 0.1mm Process: Laser cutting, NCT Punching, CNC bending, riveting, welding, surface treatment...

Viernes 28 agosto 2020

Surface treatment : anodized（Zinc/Nickel/Chrome/Plated, Spray paint, powder costing etc.） Material： sus/spcc/secc Tolerance：0.1mm Engraved logo we offer like Engrave logo by laser, Engrave logo by stamping, etc The characteristic of this product：The electronic enclose made of sheet...

Viernes 28 agosto 2020

What is laser carving? Radium carving refers to laser carving, is through the laser beam of light can lead to chemical and physical changes of surface material and carved traces, or through the light energy to burn off part of the material, showing the need to etch graphics, text...

Jueves 27 agosto 2020

Teflon Mesh Conveyor Belt Introductions Teflon mesh conveyor belt is made of PTFE coated fiberglass open mesh which offers excellent release property, chemical resistant, high tensile strength, dimension stable and withstand high temperature up to 600°F. There are various mesh sizes...

Martes 25 agosto 2020

Cantidad : 100000pcs/ - Precio : 1.5-8.8

TENROAD offers colored crushed glass beads for sale, our crushed glass chips & granule are made by the recycled glass rocks. It is lighter in weight, it has the hardness of glass bead, and its sharp, angular grains produce a very clean bright finish. They are insulation and can...

Viernes 21 agosto 2020

I Bar Grating is with a shape of “I” bar, which is more humanistic to let some tenuous things go through. I-bar grating is also with the process of swaging, which makes it beautiful. The I-bar type and the swaging process make I-bar grating much lighter than swaged aluminum grating...

Jueves 20 agosto 2020

Cantidad : 100-100000

Product characteristics 1. Aluminum plate surface dealing: Black Anodized/Clear Anodize/Polished/Deactivation/High-speed sandblasting/Superficial wiredrawing 2. Aluminium thickness: 0.5mm, 1mm,1,5mm 1.8mm,2mm, 3. Component: Screws, Nuts 4. Glue: 3M adhesive at the back - Cut out...

Jueves 20 agosto 2020

Cantidad : 100-100000

What is PCB with Metal Dome Metal shrapnel (also known as pot or piece, metal dome, snap dome), made of ultra-thin (0.05mm-0.1mm thickness) and ultra-thick (usually high hardness) stainless steel 301 or 304 material. Metal dome is an important part of the dome switch pcb. They are...

Jueves 20 agosto 2020

Cantidad : 100-100000

Product characteristics 1. Lower resistance, it's about 1ohm-50ohm 2. More flexible, standard for bending and high temperature 3. Pitch: 0.3mm, 0.5mm, 1mm, 1.25mm, 2mm,2.54mm - SMD: LED, Resistor, IC, connector, capacitors We are one of the best graphic overlay manufacturers.If you...

Miércoles 19 agosto 2020

Flexible PCB is generally made of a flexible insulating substrate and is a flexible material that can be bent and flexed arbitrarily. FPC is favored for its lightweight, thin thickness, and free bending and folding. FPC is generally used in boards that need to be repeatedly flexed...

Miércoles 19 agosto 2020

SPEEDAPCB has been focusing on the production of various PTH (plated through hole PCB), buried via hole PCB and blind via hole PCB, and HDI PCB prototype. When it comes to blind and buried hole circuit boards, everyone thinks of HDI boards. Generally, there are more blind and buried...

Miércoles 19 agosto 2020

Immersion nickel / gold is a thick layer of nickel-gold alloy with good electrical properties and can protect the PCB for a long time. Unlike OSP PCB Board, which is only used as a rust-proof barrier layer, it can be useful and achieve good electrical properties during long-term use of the PCB...

Jueves 13 agosto 2020

Waring Brass tactile indicator (XC-MDD2002) Circled surface,Solid studs with pin Place of Origin: Zhejiang,China (Mainland) Brand Name: XC Advantage: Factory Directly Sale Function: Anti-slip and provide protection for the blind and disabled The Details of Brass studs DIMENSIONS: Outer Dia...

Jueves 06 agosto 2020

Cantidad : 1000tons - Precio : 100USD

ERW pipe means electric resistance welded pipe, and it is a resistance welding by 10-500 kHz of high-frequency current. The raw material of the ERW steel pipe is hot rolled steel coil made of steel billet, and the usual material is Q195, Q215, Q235, Q355 in China ERW pipe grade, which...

Sábado 11 julio 2020

Cantidad : 3000 squar - Precio : 1500-160000$

Pixel Pitch: 1.25mm/ 1.5625mm/ 1.667mm/ 1.923mm/ 2.5mm/ 3.1mm/ 4.1mm/ 6.2mm Panel Weight: 1.5KG/panel Average Power Consumption: 480W/sqm Brightness: 600-1000 nits Weather Rating: For indoor only AmRigidPro Series Download Catalog Contact Us Light-weight, Yet High Quality Image For over 25 years...

Miércoles 08 julio 2020

Cantidad : 150 sets/m - Precio : USD $1000~$30000

DF71M model is a high speed towel dobby loom with excellent design and prominent performance. The loom can weave not only precise garment fabrics and decorative cloth, but also industrial cloth like glass fiber cloth and filter cloth. This dobby weaving machine is competent for...

Miércoles 01 julio 2020

What is rapid prototyping china? Rapid prototyping is a kind of professional manufacturing technology that is used to produce high-quality entity models of three-dimensional designs. Prototypes are useful for design improvements and can be used as stepping stones for comprehensive...

Martes 23 junio 2020

Detail Surface treatment : anodized（Zinc/Nickel/Chrome/Plated, Spray paint, powder costing etc.） Material： sus/spcc/secc Tolerance：0.1mm Engraved logo we offer like Engrave logo by laser, Engrave logo by stamping, etc The characteristic of this product：The electronic enclose made...

Martes 23 junio 2020

Detail Sheet metal box bending, also known as metal box fabrication, is often used to deform material to an angular one, which is one of the most important aspect of sheet metal forming bending. As one of the most experienced china sheet metal suppliers, HSF fabrication supplies custom...

Viernes 29 mayo 2020

In the range of 2-12 μm, germanium is the most commonly used material for the production of spherical lenses and windows for high efficiency infrared in imaging system. Germanium has a high refractive index (about 4.0 through 2-14μm band), usually do not need to be modified due to...