SHRINKAGE - 878 Anuncios

Miércoles 03 abril 2024

High transparency and gloss: Red PET Film has high transparency and good gloss, which can improve the product grade and add market value. Good ink adhesion: The surface of red translucent plastic film has good adhesion to various printing inks, which is suitable for various high-end...

Sábado 30 marzo 2024

Packson - Expert in 2K｜Multi-shot Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products...

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

CSA Binder Introduction: Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious material blend high in C4A3S (Calcium Sulfoaluminate Crystals). CSA Binder characteristics • Appearance: light grey powder • Rapid strength development...

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks like...

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

CSA expansive additive description: The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with...

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for calcium sulfo-aluminate cement, also named rapid setting cement, high strength cement, fast hardening cement...

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks like...

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Miércoles 27 marzo 2024

Carrageenan E407, CAS No.: 9000-07-1, also known as Eucheuma plastic, stone cauliflower,it is from Eucheuma, seaweed, carrageenan and other red algae seaweed extracted from the hydrophilic colloid. Carrageenan has many physicochemical properties such as hydrophilic colloid, gel, thickening...

Jueves 21 marzo 2024

Precio : RMB20-100/kg

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables...

Jueves 21 marzo 2024

Precio : RMB20-100/kg

ANMEI, YOUR PROFESSIONAL PLASTIC SUPPLIER! Contact US TODAY ANMEI focuses on supplying the 5G New energy and intelligence appliance market with engineering plastics and color masterbatch. We develop and keep innovations to provide customized services on supplying modified plastics PA6GF...

Miércoles 20 marzo 2024

Product Name: Hexamethylcyclotrisiloxane Molecular Formula: [(CH3 ) 2 SiO]3 Molecular Weight: 222.47 CAS No.: 541-05-9 UN No.: 1325 Physical and Chemical Properties: Melting Point: 64℃ Boiling Point: 134℃ Relative Density (water=1): 1.12 Appearance: White crystalline lens. Technical...

Sábado 16 marzo 2024

Precio : 1-100

BMC SMC thermosetting plastic products are produced by SMC and BMC molding process. PRODUCTS Types of BMC/SMC Molded Products BMC/SMC Motor SMC/BMC plastic edging motor change the traditional material of iron and aluminum to reduces the process but seals more. Servo Motor Plastic-Envelop...

Sábado 16 marzo 2024

Precio : 1-100

SMC Antenna Reflector Mould The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better...

Jueves 07 marzo 2024

Cantidad : 9999 - Precio : 1,00 €

Probador de relación y fuerza de contracción Solicitud El FSR-01 sirve para medir tanto las fuerzas de contracción como las proporciones de películas termorretráctiles, generalmente realizadas mediante extrusión y estirado en caliente durante la fabricación, conservando este estado...

Martes 05 marzo 2024

Dental Tooth Materials PEEK Removable Denture R&D Series Dental peek material R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of PEEK Denture Material R&D Series Material Properties Test...

Viernes 01 marzo 2024

Precio : USD3000-200000

Molding Over Molding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements...

Viernes 01 marzo 2024

Precio : USD3000-200000

Insert Mold USM molds focus on structural parts injection molds, water-assisted Gas-assisted injection molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding...

Viernes 01 marzo 2024

Precio : USD3000-200000

gas injection moulding manufacturers gas injection moulding / gas assist injection moulding / gas assist molding gas injection mold / gas injection mould gas assist injection molding design guide Water & Gas Injection Mold Since the thermal conductivity and heat capacity of water...

Sábado 24 febrero 2024

This product is ideal for the production of multilayer coextrusion tube films or sheet films. The multilayer coextrusion process allows for the creation of films with multiple layers, each with distinct properties. This can result in a final product that combines the best characteristics...

Jueves 22 febrero 2024

Cantidad : 1000t/m - Precio : RMB20-100/kg

Tubes are colored to make the identification process easier in loose tube optical fiber cables. Low-shrinkage PBT masterbatch material as loose tube materials is used in the Fiber Optic Cable industry. Anmei Company, one of the global masterbatch suppliers you can rely on, provides...

Jueves 22 febrero 2024

Egret started to produce wholesale foam tape in 2019, we have our own foaming machines to make different foam materials. What is foam tape? Foam tape is made of different foam materials, single-coated or double-coated aggressive solvent acrylic-based adhesives. After that, it can...

Jueves 22 febrero 2024

SH-22XX series is transparent liquid silicone rubber. It is special for the production of medical tubes. Hardness ranges from 40A to 80A. FDA, LFGB, and Biocompatibility. etc certified. Category: Medical Grade Silicone Rubber Properties of Medical Grade Silicone Rubber for Catheter...

Jueves 22 febrero 2024

SH-22XX series is transparent silicone rubber. It is special for the production of medical tubes. Hardness ranges from 40A to 80A. FDA, LFGB and Biocompatibility. etc certified. Category: Medical Grade Silicone Rubber Properties of silicone rubber medical for Catheter Cavity Excellent...

Miércoles 21 febrero 2024

The 21st century is an era of sustainable development of the marine economy, and marine resources are an important sector of economic development. Gr5 titanium tube has become the preferred material for deep-sea equipment manufacturing due to its excellent corrosion resistance, low density...

Martes 20 febrero 2024

Supporting Roller CIC is a more than 30 years manufacturer and reputed supplier of support roller used in cement rotary kilns, rotary type driers and so on. CIC has been specialized in designing, producing whole set of rotary machinery, so also has rich experience in supplying support device...

Lunes 19 febrero 2024

The hot wind direction inside the shrink machine tunnel can be adjusted and the contraction effect is good. Imported heat insulation cord fabric greatly reduces heat loss. Shrinkage temperature, conveying speed and air volume inside the shrink tunnels for sale can also be adjusted...

Sábado 03 febrero 2024

DIN 1587 Metal Acorn Nuts DIN 1587 hex acorn nut introduction: DIN 1587 nut is a nut with a cap. Its function is to prevent foreign impurities and moisture from invading the interior and causing corrosion and rust. At the same time, in places where some industrial machinery often...

Miércoles 31 enero 2024

Knitted Greyback Display Fabric AA720 is a high-quality display fabric that is perfect for various applications such as roll-ups, backdrops, frames, and exhibition bases. Made from 100% polyester and processed using the warp-knitted 3 bar method, this material blockout fabric is durable...

Jueves 25 enero 2024

Cantidad : AS PER ORD

Chafer Fabrics are the special industrial fabrics mainly made of Nylon 6, Nylon 66 and Polyester yarns. Chafer fabric has quite high breaking strength and good adhesion. Yusheng produces a variety of chafer fabrics, Standard products mainly made of Nylon 6, Nylon 66 and Polyester...