MEDICAL - 6653 Anuncios

Martes 19 marzo 2024

The whole 304 stainless steel material is anticorrosive, acid-proof and rust-proof, fast heating, safe and reliable, stable rising and falling, easy to use and high temperature safety protection. The stainless steel surgery table is a durable and versatile medical device designed...

Martes 19 marzo 2024

The whole 304 stainless steel material, anticorrosive, acid-proof and rustproof, the structure is novel, clean, convenient and durable. The Clinic surgical table for dogs is a specialized table designed specifically for performing surgical procedures on dogs in veterinary clinics...

Sábado 16 marzo 2024

Precio : ￥30~200 RMB

ALIF cylinder sensor is the core electronic component of automatic control, which is composed of a shell, magnetic components, electronic circuits and wires. Through the detection of the travel position of the actuator, the purpose of automatic control such as positioning and limit...

Sábado 16 marzo 2024

Precio : 1-10usd

The Purified D dimer Antigen is suitable for use as a standard in immunoassay, immunogen for antisera production, and tracer for iodination. Each laboratory should determine an optimum working titer for use in its particular application. Other applications have not been tested but...

Sábado 16 marzo 2024

Precio : 1-10usd

Purified cTnI Protein Troponin I–cardiac troponin i protein (cTnI) Immunological activity confirmed by reaction with monoclonal antibody that is specific for the troponin protein I cardiac isoform in immunoblotting. Specification Of Purified cTnI Protein Source: Human heart tissue Format...

Sábado 16 marzo 2024

Precio : 1-10usd

NeoCide® Tris (Hydroxymethyl) Aminomethane For IVD Tris is a very important biological buffer, commonly used as a combo with hydroxymethyl aminomethane, keeping pH at 7.0-9.1 stably. It is sensitive to temperature and concentration. The pH value of Tris based aqueous solution is about 10...

Sábado 16 marzo 2024

Precio : 1-10usd

Good's buffer has the following characteristics: 1. High water solubility; 2. Low cell membrane permeability; 3. stable acid-base dissociation constant; 4. Low metal chelating capacity; 5. High chemical stability; 6. Low absorption spectra in ultraviolet and visible region;7. Low salt effect; 8...

Sábado 16 marzo 2024

Precio : 1-10usd

NeoCide® PC-300 preservative products contain a percentage of one or both chemical substances 5-chloro-2-methyl-4-isothiazolinone-3-on e (CMIT) and 2-methyl-4-isothiazloin-3-one (MIT). This IVD diagnostic reagent consists of 3% CMIT/MIT in a salt-free proprietary glycol containing...

Sábado 16 marzo 2024

Precio : 1-10usd

We specialize in providing reliable in vitro diagnostic rapid test kits for detecting various infectious diseases. Our product offerings include colloidal gold antibody tests, ebola test kits, hepatitis C test kits, dengue test kits, H.pylori test kits, and malaria test kit for sale...

Sábado 16 marzo 2024

Precio : 1-10usd

IVD raw materials are known as one of the in vitro diagnostic products. IVD refers to medical devices, in vitro reagent, and drugs. IVD, as a branch of medical devices, has unique definitions and regulatory supervision. The IVD materials industry and laboratory medicine constitute...

Jueves 14 marzo 2024

Endo Clinch Grasper Boer 5mm endo clinch grasper is a type of grasper or forceps with a 5mm diameter shaft that is designed for single-use and is disposed of after each use. The endograsper has a clinching mechanism that allows it to hold onto the tissue securely during the surgery...

Jueves 14 marzo 2024

Boer is a professional manufacture of disposable medical consumables and consumables such as veress needle, specimen retrieval bag, suction and irrigation tube and electrode. All these consumables can be used in a laparoscopy surgery and all are steriled. Disposable Medical Devices...

Jueves 14 marzo 2024

Claw Grasping Forceps Boer laparoscopic traumatic grasper is also known as a toothed grasper, rat-toothed grasper, alligator jaw grasper, or claw grasper for the shape. It is used in laparoscopic surgeries to grasp and manipulate tissues and organs. Boer laparoscopic claw grasper...

Jueves 14 marzo 2024

Bladed Trocar Boer disposable auto-shield trocar in laparoscopy is also know as endoscopic bladed trocar or safety-tip trocar. It has a sharpe knife inside the Obturator. When puncturation, the knife will cut the abdominal wall, and when the bariatric trocar reaches inside the abdominal wall...

Jueves 14 marzo 2024

Minimally Invasive Surgical Instruments Disposable medical instruments are widely used today, as one of professional laparoscopy instruments dealers and laparoscopy equipment companies, Boer Medical is doing its best to supply fine and cost-effective laparoscopic tools to all doctors...

Jueves 14 marzo 2024

Clear PVC , commonly referred to as transparent plastic , are offered in a variety of standards, including ASTM, DIN, and ANSI. The transparent plastic pipe is used for the chemical pipeline protection casing due to its excellent chemical resistance and visibility. The plastic transparent...

Miércoles 13 marzo 2024

The SWIR Camera series feature a 640 x 512 pixel InGaAs focal plane array (FPA) with a pitch of 15μm. The camera operates in the 900nm – 1700nm wavelength range, which covers the SWIR region of the spectrum. The product has the characteristics of small size, high reliability and excellent...

Martes 12 marzo 2024

Precio : USD1500 to USD3000

Acetyl Tributyl Citrate cas 77 90 7 Wholesale & Bulk This product is non-toxic plasticizer, which can be used as plasticizer of PVC, cellulose resin and synthetic rubber. For non-toxic PVC granulation, food packaging containers, children's toys, medical products, films, plates...

Martes 12 marzo 2024

Cantidad : 10,000+ - Precio : $0.1 - $1,000

Injection Molding Over 20 years in China prototype precision plastic injection mold design services covering a wide range of plastic injection mold and molding technology for electronic, cosmetic, food & medical, household, and industrial products with engineering assistance...

Martes 12 marzo 2024

Cantidad : 10,000+ - Precio : $0.1 - $1,000

EDM Machining Service Electrical discharge machining, sometimes referred to as spark machining, spark eroding, die sinking, wire burning, or wire erosion, is a metal production technique that uses electrical discharges to carve out the required shape. The CNC EDM service is provided...

Martes 12 marzo 2024

Cantidad : 10,000+ - Precio : $0.1 - $1,000

5 Axis CNC Machining 5 axis custom CNC machining service provided for the manufacturing of complicated geometrical parts for both metal and plastic. 5-axis One of the most cutting-edge methods accessible now is CNC machining. It uses subtractive machining to give part production...

Martes 12 marzo 2024

Cantidad : 10,000+ - Precio : $0.1 - $1,000

4 Axis CNC Machining 4 axis cnc machining service provided for the prototype manufacturing of high precision and quality mechanical parts such as sprial shaft and gear as well as complex components for both metal and plastic. For your next 4-axis CNC milling job, team up with Fathom...

Martes 12 marzo 2024

Copper Precision Spare Parts T1, T2 copper is mainly used as conductive, heat-conducting and corrosion-resistant components, such as wires, cables, conductive screws, shells and various conduits, etc. T3 copper is mainly used as structural materials, such as the production of electrical switches...

Martes 12 marzo 2024

Teflon coated magnets are known for their excellent chemical stability, corrosion resistance, friction resistance, and heat resistance, and have developed into world-class industrial coatings. Teflon materials have also been used in the surface treatment of magnetic materials, using...

Martes 12 marzo 2024

Xin Pin Rapid Prototyping Application Xin Pin is an ISO 9001 certificated manufacturer that focuses on providing high-quality and precision parts to different kinds of industries. With our more thandecades of experience and our cognizance of the prototyping industry , you can rest...

Martes 12 marzo 2024

CNC machining/ vacuum casting/injection mold prototype to production manufacturing is available. CNC machining/ vacuum casting/injection mold prototype to production manufacturing is available. Xin Pin has the full machine to produce the plastic parts. It allows us to offer on-demanding...

Martes 12 marzo 2024

High efficiency and exact precision. A technology accumulated by wisdom to shape from simple to complex. At Xin Pin, we provide full-service 5 Axis CNC machining for many types of materials and can support your large and small part needs. Advancements in 5-axis machines, we can efficiently...

Sábado 09 marzo 2024

Jlymim provides basic surgical instruments, biopsy forceps, high frequency electric knife nickel and forceps, stapler, orthopedic surgical robot parts and other complex and precise parts for medical treatment. From customized selection of concept raw materials to manufacturing, integration...

Sábado 09 marzo 2024

MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC, MIM...

Viernes 08 marzo 2024

This powerful small neodymium magnets measures 1/2" in diameter, 1/8" in thickness, with the pull force of 7.97 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...